After the permanent shut down of Kori Unit 1, various decommissioning activities will be implemented, including decontamination, segmentation, waste management, and site restoration. During the decommissioning period, waste management is among the most important activities to ensure that the process proceeds smoothly and within the expected timeframe. Furthermore, the radioactive waste generated during the operation should be sent to a disposal facility to complete the decommissioning project. Square and cylindrical concrete re-package drums were generated during the 1980s and 1990s. The square, containing boron concentrates, and cylindrical, containing spent resin, concrete re-package drums have been stored in a radioactive waste storage building. Homogeneous radioactive waste, including boron concentrates, spent resin, and sludge, should be solidified or packaged in high-integrity containers (HICs). This study investigates the sequential segmentation process for the separation of contaminated and non-contaminated regions, the re-packaging process of segmented or crushed cement-solidified boron concentrate, and re-packaging in HICs. The conceptual design evaluates the re-packaging plan for the segmented and crushed cement-solidified waste using HICs, which is acceptable in a disposal facility, and the quantity of generated HICs from the treatment process.

Subgenus Bothynoptera Schaum, 1863 of the genus Parena is mainly found in Oriental region. Despite this widespread distribution, species of the subgenus Bothynoptera are poorly known in Korea. While a total of 14 species have been recorded worldwide, only 3 species have been recorded in Korea. In this study, as a revisional work of Korean known species, a pictorial key and photographs of habitus and male genitalia for each species are provided, with a newly recorded species in Korea.

The continuous use of pesticides with the same mode of action has lead to the development of insecticide resistance in the target pests. Establishing pesticide resistance management methods and effective control strategies for these pests has become an important target. Bemisia tabaci, a representative pest of greenhouse, directly affects the growth of crops at all stages of its development except eggs. It also causes indirect damage by secreting honeydew that eventually promotes sooty mold in leaves and fruits. In this study, eight insecticides with different mechanisms of action (Flonicamid, Fluxametamide, Spinetoram, Cyantraniliprole, Dinotefuran, Pyridaben, Milbemectin and Pyriproxyfen), and registered for use against cucumber B. tabaci were selected and tested for insecticide resistance. The tested populations of B. tabaci were collected from greenhouse cucumber cultivations in 12 domestic regions. The results were presented as RR (Resistance ratios), and CEI (Control efficacy index) values.

The rate of resistant pest emergence has accelerated due to the continuous use of pesticides. Therefore, it is important to formulate insecticide resistance management measures and effective control methods for pest. Bemisia tabaci, a greenhouse pest, causes direct damage to crops such as growth inhibition and leaf discoloration at all developmental stages except for eggs. It also indirectly damages plants by secreting honeydew, which covers surrounding leaves and fruits, leading to sooty mold development. In this study, eight insecticides with high usage rates, categorized by their mode of action, were selected. Samples of Bemisia tabaci were collected from six regions, and resistance analysis were conducted. The results showed that Flonicamid exhibited a resistance ratio of 8.91 in Sejong, while Pyriproxyfen showed a high resistance ratio of 63.56 in Gunwi. Fluxametamide, Spinetoram, Cyantraniliprole, Dinotefuran, Pyridaben, and Milbemectin displayed resistance ratio ranging from 0.02 to 1.14 in most regions, except for Flonicamid and Pyriproxyfen.

This study aimed to examine the changes in dry matter yield and growth characteristics of alfalfa (Medicago sativa L.) in response to variations in sowing dates during the autumn season of 2021-22 in a dry paddy field of Chilbo-myeon, Jeongeup-si, Jeollabuk-do. Treatments comprised four sowing dates at 10-day intervals, i.e., October 8, October 18, October 28, and November 8, 2021. The winter survival rate of alfalfa showed a significant difference between different treatments but was at a satisfactory level for all (p<0.05). The winter survival rate for the fourth sowing date, a month later than the first sowing date, was approximately 11.7% lower than that for the first sowing date. The plant height ranged between 82.3–93.1 cm and 60.5–63.7 cm at the first and second harvest, respectively, smaller at the second harvest than at the first harvest. The total dry matter yield of alfalfa was the highest at 13,316 kg/ha for the first sowing date, and the later the sowing date, the lower the dry matter yield. The protein content of alfalfa ranged between 13.6–17.3% in the first harvest, lower than the standard alfalfa protein content of 20% or more. In relative feed value, the first sowing (Oct. 8) was the most significantly higher in the first harvest (p<0.05). These results suggest that the early and mid-October sowing dates are optimum for sowing alfalfa during autumn and result in improved plant growth, dry matter yield, protein content, and winter survival compared to those at later sowing dates. Therefore, dry paddy fields can be safely employed for alfalfa cultivation with sowing dates in early and mid-October during autumn.

In this study, Fe–Mo–MgO catalysts for the synthesis of carbon nanotubes (CNTs) were prepared using the combustion method and CNTs were synthesized through catalytic chemical vapor deposition. The combustion time was controlled to 0.5, 1, 2, 3, 5, 10, and 24 h in the catalyst preparation stage. The residual carbon contents after the combustion stage and the morphologies of synthesized CNTs were also analyzed. The diameter, yield, and crystallinity of the synthesized CNTs were found to remarkably vary according to the combustion time in the catalyst preparation process. The amount of residual carbon in the catalyst considerably affects the purity, crystallinity, diameter and its distribution, and wall number of CNTs. Based on the yield and crystallinity, CNTs synthesized using the catalyst with a combustion time of 3 h were determined to be the most appropriate for application in field emitters

We investigated the effects of parametric synthesis conditions of catalysts such as sintering temperature, sorts of supports and compositions of catalysts on alignment and length-control of carbon nanotubes (CNTs) using catalyst powders. To obtain aligned CNTs, several parameters were changed such as amount of citric acid, calcination temperature of catalysts, and the sorts of supports using the combustion method as well as to prepare catalyst. CNTs with different lengths were synthesized as portions of molybdenum and iron using a chemical vapor deposition reactor. In this work, the mechanisms of alignment of CNTs and of the length-control of CNTs are discussed.