Three kinds of porous polymer were synthesized using a solvothermal of tri-4,4’- diphenylmethane diisocyanate (MDI-trimer) and different diamino monomers. The effects of the synthesis conditions and the monomer selection on the synthesis of porous polymer properties were studied. The results show that the synthesis of NH2-containing monomer molecules smaller the microporous polymers was easy to implement; the specific surface areas of the polymers are related to the monomer ratio and the reaction time. The results show that the synthesized porous polymer had good hydrogen storage performance; the hydrogen storage ability improved with the addition of heterocyclic nitrogen.

범세계적인 온실가스저감 노력이 활발하게 움직이고 있다. 이러한 현상은 수송분야에서 친환경자동차 보급이라는 전략으로 이루어지고 있다. 친환경자동차 중 수소연료전지차는 수소라는 신에너지를 활용하는 자동차로 친환경차 중 유일하게 전기를 생산히야 모터를 구동하는 자동차이다. 수소연료전지차는 수소와 공기를 사용하기 때문에 청정하다는 이로운 점도 있지만 아직은 해결해야할 다양한 문제점을 가지고 있다. 수소연료전지차에서 전기를 생산하는 스택 내 부품 중 전해질 막은 수소이온을 전달하고 생성된 물을 활용하는데 매우 중요한 역할을 하고 있으나 불순물, 온도변화, 부하운전, 가습조건 등 다양한 자동차 환경에서 열화가 발생한다. 전해질 막 연구에 있어 자동차 운전환경에서 나타나는 열화 현상과 발생 가능성 및 해결방안에 대한 고찰을 하였다.

The recent rise in applications of thermoelectric materials has attracted interest in studies toward the fabrication of thermoelectric materials using mass production techniques. In this study, we successfully fabricate n-type Bi2Te2.7Se0.3 material by a combination of mass production powder metallurgy techniques, gas atomization, and spark plasma sintering. In addition, to examine the effects of hydrogen reduction in the microstructure, the thermoelectric and mechanical properties are measured and analyzed. Here, almost 60% of the oxygen content of the powder are eliminated after hydrogen reduction for 4 h at 360°C. Micrographs of the powder show that the reduced powder had a comparatively clean surface and larger grain sizes than unreduced powder. The density of the consolidated bulk using as-atomized powder and reduced atomized powder exceeds 99%. The thermoelectric power factor of the sample prepared by reduction of powder is 20% better than that of the sample prepared using unreduced powder.

고분자전해질막은 전극 이외에 전기 화학 연료전지의 성능을 결정하는 중요한 요소이다. 고분자전해질막은 가스나 양성자 등의 작은 분자를 선택적으로 수송해야 한다. 고분자전해질막을 투과한 가스는 급속히 전기 화학적 환원을 발생시켜 음극 촉매의 열화를 유발하기 때문에 수소 장벽으로 작동해야 하며 가능한 한 빨리 양성자를 이동시켜야 한다. 지금까지 고분자전해질막의 수소 기체 투과도를 측정하는데 한정된 방법(예 : Constant volume/variable pressure (Time-lag)법)을 사용 했다. 그러나 측정의 대부분은 고분자전해질막은 건조된 진공 하에서 이루어진다. 그렇지 않으면 얻어진 수소 투과도는 측정 오차가 커지는 원인이 되기 쉽다. 이 연구에서는 일반적으로 고분자전해질막으로 사용되는 Nafion212의 수소 가스 투과 특성을 온도와 습도가 동시에 제어되는 in-situ 측정 시스템을 이용하여 평가하였다.

This paper addresses the effect of dopants on the electronic properties of zigzag (8, 0) semiconducting single walled carbon nanotubes (SWCNTs), using extended Hückel theory combined with nonequilibrium Green’s function formalism. Through appropriate dopant concentrations, the electronic properties of SWCNTs can be modified. Within this context, we present our ongoing investigation on (8, 0) SWCNTs doped with nitrogen. Quantum confinement effects on the electronic properties of the SWCNTs have also been investigated. The obtained results reveal that the electronic properties of SWCNTs are strongly dependent on the dopant concentration and modification of electronic structures by hydrogen confinement.

A commercial NiO (green nickel oxide, 86 wt% Ni) powder was reduced using a batch-type fluidized-bed reactor in a temperature range of 500 to 600 oC and in a residence time range of 5 to 90 min. The reduction rate increased with increases in temperature; however, agglomeration and sintering (sticking) of Ni particles noticeably took place at high temperatures above 600 oC. An increasing tendency toward sticking was also observed at long residence times. In order to reduce the oxygen content in the powder to a level below 1 % without any sticking problems, which can lead to defluidization, proper temperature and residence time for a stable fluidized-bed operation should be established. In this study, these values were found to be 550 oC and 60 min, respectively. Another important condition is the specific gas consumption rate, i.e. the volume amount (Nm3) of hydrogen gas used to reduce 1 ton of Green NiO ore. The optimum gas consumption rate was found to be 5,000 Nm3/ton-NiO for the complete reduction. The Avrami model was applied to this study; experimental data are most closely fitted with an exponent (m) of 0.6 ± 0.01 and with an overall rate constant (k) in the range of 0.35~0.45, depending on the temperature.

Pt@Cu/C core-shell catalysts were successfully prepared by impregnation of a carbon support with copper precursor, followed by transmetallation between platinum and copper. The Pt@Cu/C core-shell catalysts retained a core of copper with a platinum surface. The prepared catalysts were used for hydrogen production through catalytic dehydrogenation of decalin for eventual application to an onboard hydrogen supply system. Pt@Cu/C core-shell catalysts were more efficient at producing hydrogen via decalin dehydrogenation than Pt/C catalysts containing the same amount of platinum. Supported coreshell catalysts utilized platinum highly efficiently, and accordingly, are lower-cost than existing platinum catalysts. The combination of impregnation and transmetallation is a promising approach for preparation of Pt@Cu/C core-shell catalysts.

This study has implemented an experiment in which hydrogen sulfide was removed by establishing a two-stage packed tower effector filled with nutritious medium and also filling a tower that was immobilized in ceramic media after isolating and identifying the sulfur oxidizing bacteria from a sewage treatment plant. As a result, strains isolated from the sewage treatment plant were found to be similar, including Bacillus fusiformis, Bacillus anthracis sp., Paenibacillus sp., Serratia marcescens sp., Bacillus thuringiensis. The effector that immobilized isolated strains in the ceramic media achieved an approximately 90% removal rate of hydrogen sulfide, while the sterilized ceramic media not immobilized with isolated strains showed a removal rate of about 65%. In addition, the removal rate of hydrogen sulfide in the primary media packing effector immobilized with sulfur oxidizing bacteria was about 92%, while the secondary effector filled with medium had a hydrogen sulfide removal rate near 100%. In addition, 90% efficiency of removal was shown in conditions of EBCT 60s in the experiment that investigated removal rate of hydrogen sulfide according to residence-time, while the efficiency was rapidly reduced up to 45% in conditions of EBCT 30s. On the other hand, when operating for an extended period time while increasing the concentration of injected hydrogen sulfide, the amount of sulfate was increased from 2 mg/L to 12.7 mg/L, and pH was rapidly reduced to 2.7.

This study has implemented an experiment in which hydrogen sulfide was removed by establishing a two-stage packed tower effector filled with nutritious medium and also filling a tower that was immobilized in ceramic media after isolating and identifying the sulfur oxidizing bacteria from a sewage treatment plant. As a result, strains isolated from the sewage treatment plant were found to be similar, including Bacillus fusiformis, Bacillus anthracis sp., Paenibacillus sp., Serratia marcescens sp., Bacillus thuringiensis. The effector that immobilized isolated strains in the ceramic media achieved an approximately 90% removal rate of hydrogen sulfide, while the sterilized ceramic media not immobilized with isolated strains showed a removal rate of about 65%. In addition, the removal rate of hydrogen sulfide in the primary media packing effector immobilized with sulfur oxidizing bacteria was about 92%, while the secondary effector filled with medium had a hydrogen sulfide removal rate near 100%. In addition, 90% efficiency of removal was shown in conditions of EBCT 60s in the experiment that investigated removal rate of hydrogen sulfide according to residence-time, while the efficiency was rapidly reduced up to 45% in conditions of EBCT 30s. On the other hand, when operating for an extended period time while increasing the concentration of injected hydrogen sulfide, the amount of sulfate was increased from 2 mg/L to 12.7 mg/L, and pH was rapidly reduced to 2.7.

Edaravone (Eda) is a potent scavenger of inhibiting free radicals including hydroxyl radicals (H2O2). Reactive oxygen species (ROS) such as H2O2 can alter most kinds of cellular molecules such as lipids, proteins and nucleic acids, cellular apoptosis. In addition, oxidative stress from over-production of ROS is involved in the defective embryo development of porcine. Previous study reported that Eda has protective effects against oxidative stress-like cellular damage. However, the effect of Eda on the preimplantation porcine embryos development under oxidative stress is unclear. Therefore, in this study, the effects of Eda on blastocyst development, expression levels of ROS, and apoptotic index were first investigated in preimplantation porcine embryos. After in vitro fertilization, porcine embryos were cultured for 6 days in PZM medium with Eda (10 μM), H2O2 (200 μM), and Eda+H2O2 treated group, respectively. Rate of blastocyst development was significantly increased (P<0.05) in the Eda treated group compared with only H2O2 treated group. And, we measured intracellular levels of ROS by DCF-DA staining methods and investigated numbers of apoptotic nuclei by TUNEL assay analysis is in porcine blastocyst, respectively. Both intracellular ROS levels and the numbers of apoptotic nucleic were significantly decreased (P<0.05) in porcine blastocysts cultured with Eda (10 μM). More over, the total cell number of blastocysts were significantly increased (P<0.05) in the Eda-treated group compared with untreated group and the only H2O2 treated group. Based on the results, Eda was related to regulate as antioxidant-like function according to the reducing ROS levels during preimplantation periods. Also, Eda is beneficial for developmental competence and preimplantation quality of porcine embryos. Therefore, we concluded that Eda has protective effect to ROS derived apoptotic stress in preimplantation porcine embryos.

The H2/CO2selectivity across ZIF-7 membrane prepared by in-situ growth method at 105°C synthesis temperature for 2 h, was the highest at 15.98, nearly 4 times higher than H2/CO2 Knudsens E.q. factor of 4.7. ZIF-7 membranes prepared from in-situ growth method also surprisingly performed better than ZIF-7 membranes prepared by other innovative techniques such as electro-spray deposition and secondary growth methods. (selectivity : 9.59 and 4.7, respectively) Despite lower selectivity performance than the numerically predicted results, the micro-porous ZIF-7 membrane prepared in this work demonstrated higher H2 permeability of 3770 barrer. Performance comparison between various inorganic membranes, including ZIF-7 & ZIF-8 membranes, was made and a new upper boundary for inorganic membranes was also constructed and reported.

금속 유기 골격체(Metal Organic Framework, 이하 MOF) 종류의 하나인 제올라이트형 이미 다졸레이트 골격체(Zeolitic Imidazolate Framework, 이하 ZIF) 중 ZIF-8은 Zn 금속이온과 imidazole 유기 리간드의 결합으로 이루어져 있다. 본 연구에서는 여러 종류의 용매에서 합성된 ZIF-8의 1차 결정과 2차 입자의 형성이 용매가 가진 특성에 영향을 받는 것을 확인하였다. HBD(hydrogen bond donation) 값이 큰 용매에서 합성된 ZIF-8의 1차 결정은 HBD 값이 작은 용매에서의 것보다 크기가 컸고, 용매의 유전상수의 값이 작을수록 2차 입자의 크기가 큰 ZIF-8이 합성되었다.

본 발표에서는, 팔라듐계 수소분리막의 구성과 원리, 응용분야, 국내외 연구기관별 연구현황 및 한국에너지기술연구원에서 진행한 연구결과를 소개한다. 다공성지지체의 표면에 치밀질 팔라듐계 합금을 코팅하여, 수소를 선택적으로 분리할 수 있는 분리막의 특성, 모듈구성, 이를 이용한 CCS 공정에 적용예를 통하여 설명한다. 구체적인 내용으로, 1. 분리막 제조부분에서는, 평판형 다공성 니켈지지체 표면에 컬럼형태의 세라믹을 일차적으로 코팅하고, 이의 표면에 팔라듐을 코팅해서 치밀화는 공정을 설명한다. 2. 모듈 부분에서는, 모듈형태에 따른 수소플럭스와 회수율에 미치는 영향을 설명한다. 3. 개발한 분리막/모듈을 이용한 응용공정 소개를 통하여 이의 활용성 및 향후 연구방향을 제시한다.

The aim of this study was to evaluate the chemical quenching system for residual ozone and to determine the operating condition for the quenching system. Hydrogen peroxide (H₂O₂) and sodium thiosulfate (Na₂S₂O₃) were investigated as quenching reagents for ozone removal, and the tendency of each chemical was notably different. In the case of H₂O₂, the degradation rate of ozone was increased as the concentration of H₂O₂ increase, and temperature and pH value have a significant effect on the degradation rate of ozone. On the other hand, the degradation rate of ozone was not affected by the concentration of Na₂S₂O₃, temperature and pH value, due to the high reactivity between the S₂O₃²- and ozone. This study evaluates the decomposition mechanism of ozone by H₂O₂ and Na₂S₂O₃ with consideration for the water quality and reaction time. Furthermore, the removal test for the quenching reagents, which can be remained after reaction with ozone, was conducted by GAC process.

Star forming galaxies found in the early universe exhibit asymmetric Lyα emission line that results from multiple scattering in a neutral thick medium surrounding the Lyα emission source. It is expected that emergent Lyα will be significantly polarized through a large number of resonance scattering events followed by a number of successive wing scatterings. In this study we adopt a Monte Carlo method to calculate the polarization of Lyα transferred in a very thick static slab of Hi. Resonantly scattered radiation associated with transitions between 1S1 2 − 2P1 2 , 3 2 is only weakly polarized and therefore linear polarization of the emergent Lyα is mainly dependent on the number of off-resonant wing scattering events. The number of wing scattering events just before escape from the slab is determined by the product of the Doppler parameter a and the line center optical depth τ0, which, in turn, determines the behavior of the linear polarization of Lyα. This result is analogous to the study of polarized radiative transfer of Thomson scattered photons in an electron slab, where the emergent photons are polarized in the direction perpendicular to the slab when the scattering optical depth is small and polarized in the parallel direction when the slab is optically thick. Our simulated spectropolarimetry of Lyα shows that the line center is negligibly polarized, the near wing parts polarized in the direction parallel to the slab and the far wing parts are polarized in the direction perpendicular to the slab. We emphasize that the flip of polarization direction in the wing parts of Lyα naturally reflects the diffusive nature of the Lyα transfer process in thick neutral media.

PDMS에 NaA zeolite를 0~40 wt% 가하여 PDMS-NaA zeolite 막을 제조하였다. SEM 관찰에 의하면 PDMS-NaA zeolite 막 내에 분산되어있는 NaA zeolite 입자의 크기는 2~5 μm이었다. PDMS-NaA zeolite 막의 N2와 H2 투과도는 막 내의 NaA zeolite 함량이 증가하면 증가하였고, N2보다는 H2의 투과도가 더 컸다. 그리고 PDMS-NaA zeolite 선택성(H2/N2)은 NaA zeolite 함량이 증가하면 증가하였다.