Rapid industrialization and urbanization have generated huge amount of environmental pollution. Especially, synthetic organic chemicals have been a serious international problem for over half a century due to their toxic and hazardous chemicals. Eco-friendly strategies for removing the chemicals from the soil and water are becoming a top priority around the world and biological treatment such as phytoremediation and bioremediation is less expensive and more sustainable than other conventional remediation techniques. Recently, many pollutant diminishing microbial endophytes have been discovered from various plants grown in contaminated area and the function of microbes to improve phytoremediation of organic pollutants has been reported. Thus, we classify synthetic organic pollutants into groups of similar compounds and discuss the contribution of endophytes to enhance phytoremediation.

수산자원보호구역의 유기물과 중금속 분포특성을 파악하기 위하여 2017년 2월 남서해연안 5개 수산자원보호구역(가막만, 여자 만, 득량만, 완도연안, 영광연안) 54개 정점에서 표층 퇴적물을 채취하여 입도, 강열감량(IL), 화학적산소요구량(COD), 산휘발성황화물(AVS) 및 중금속(As, Cd, Cr, Cu, Fe, Hg, Pb, Zn)을 분석하였다. 평균입도(Mz)는 평균 7.4±0.1Ø 였으며, 주로 세립한 니(mud) 퇴적물로 구성되어 있었다. IL, COD와 AVS의 평균농도는 각각 4.63±0.96 %, 13.0±3.1 mgO2/g·dry, 0.092±0.124 mgS/g·dry 였으며, 영광연안이 다른 보호구역에 비해 낮았다. 중금속의 평균농도는 각각 As 7.5±0.9 mg/kg, Cd 0.04±0.02 mg/kg, Cr 70.2±9.7 mg/kg, Cu 15.3±2.8 mg/kg, Fe 3.3±0.5 %, Hg 0.014±0.003 mg/kg, Pb 25.0±6.0 mg/kg, Zn 99±14 mg/kg 였으며, 보호구역내 대부분 만 안쪽에서 높고 만 외측 및 외측연안에서 낮은 특성을 보였다. 퇴적물기준 (sediment quality guidelines, SQGs), 오염부하량지수(pollution load index, PLI), 생태계위해도지수(ecological risk index, ERI)를 사용하여 퇴적물 중 금속 오염도를 평가한 결과, 남서해연안 수산자원보호구역 퇴적물은 수산생물 및 저서생물에 영향을 주지 않는 안전한 중금속 농도를 유지 하고 있었다.

We analyzed volatile organic compounds (VOCs) of petroleum-based laundry solvents in closed systems by static headspace analysis and investigated the emission characteristics of odorous compounds emitted from organic solvents in the small-scale dry cleaning process. The compounds containing eight to eleven carbon atoms were analyzed to account for 96.92% of the total peak area in a GC-MS chromatogram. It was found that the compounds with ten carbon atoms showed the largest proportion. In the small-scale dry cleaning process (3 kg of laundry and 40 min of drying time), a total of 36 VOCs was quantified, and the odor contribution of these compounds was evaluated. The sum of the odor quotient (SOQ) was analyzed up to 151±163 in the first 12 min of operation. The main odor-causing compounds were acrolein, ethylbenzene, hexane, acetone, and decane, and their odor contributions were 32.28%, 13.47%, 10.52%, 10.20%, and 8.08%, respectively.

효과적인 물환경관리계획을 수립하기 위해서는 다양한 기원의 유기물이 난분해성 유기물 농도 증가에 영향을 줄 수 있는지 여부를 파악하는 것이 중요하다. 특히 상당량의 광합성 산물은 식물플랑크톤에 의해 매일 생성되고 있지만, 이들이 수계 내 난분해성 유기물에 기여하는지에 대한 정보는 부족하다. 본 연구에서는 13C 및 15N 추적자 첨가 실험을 통해 조류기원 유기물이 생분해 (60일, 암배양) 및 산화제 (과망간산칼륨) 처리 후 분해되지 않고 잔존하는지 여부를 확인하였다. 생분해 실험 결과 광합성을 통해 생성된 총 유기탄소 (TO13C), 입자성 유기탄소 (PO13C), 입자성 질소 (P15N)는 각각 26%, 20%, 17%가 비 생분해성 유기물로 잔존하였다. 또한 상당량의 PO13C가 과망간산칼륨에 의해 산화되지 않고 잔존하였다 (초기: 12%, 60일 암배양 후: 38%). 이는 미생물에 의해 사용된 후 남아있는 조류 기원 유기물이 난분해성 유기물에 기여할 수 있음을 의미 한다. 또한 미생물에 의해 변형된 조류기원 유기물의 양은 COD 산화율 및 유기물 지표 간 격차에 영향을 줄 것으로 사료된다.

This research combines the liquid carbon precursor infiltration process for carbon/carbon composites with the fabrication procedure for organic, carbon-matrix friction materials in automotive. In the densification process, different liquid carbon precursors and numbers of densification cycle are adopted to investigate the influence on physical and mechanical properties, microstructure and tribological behavior. Experimental results indicate that the infiltration of liquid carbon precursors could improve the physical, mechanical properties and tribological performances of organic friction materials. The open porosity decreases with the number of densification cycle. Both bulk density and hardness increase with the number of densification cycle. The resin-based specimens show higher hardness and lower open porosity than those of the pitch-based specimens after each densification cycle. The tribological measurement of specimens with different carbon precursors shows that the pitch-based specimen shows lower and more stable friction coefficients and exhibits lower weight losses in comparison with other carbon precursors. Morphological observations show that a large area of smooth lubricative film was easily presented on the worn surfaces of the pitch-based specimens, whereas it was seldom observed on the worn surfaces of the preform specimen and resin-based specimens.