본 연구에서는 댐유역의 연 실제증발산량에 영향을 미치는 주요한 수문기후요소를 파악하고 유역으로부터의 연 실제증발산량 산정을 위한 다변량회귀식을 제시하고자 하였다. 이를 위하여 우리나라 5개 댐유역(괴산댐, 섬진강댐, 소양강댐, 안동댐, 합천댐)에서연 물수지분석을실시하여 연실제증발산량을 산정하였고, 수문기후자료를 이용한 다변량회귀식으로부터 산정된 증발산량과 비교 검토함으로서 다변량회귀식의 타당성을 검토하였다. 또한 잠재증발산식들을 이용한 실제증발산량 산정

The evaluation of potential submarine groundwater is an important research topic for exploring an alternative water resource. Two different approaches, water budget analysis and Rn mass balance method, were employed to investigate the annual variation of submarine groundwater discharge in 2010 at a marine watershed located at the south-eastern part of Korean Peninsula. In order to obtain reliable hydrological data during study period, temporal and spatial variations of rainfall and soil moisture had been collected and hydro-meterological data such as temperature, humidity and wind speed were collected The runoff response was simulated using SCS-CN method with spatial distributions of landuse and soil texture from GIS analysis. Six different methods were used to estimate the monthly variation of evapotranspiration and field measurements of soil moisture were used to account for the infiltration. Comparisons of infiltration and surface runoff between simulation and water balance with measurements showed coincidence. The water budget analysis and Rn mass balance method provide mean daily submarine groundwater as 5.35 and 4.07 m3/m/day in 2010, respectively.

For an accurate rainfall-runoff simulation in the river basin, it is important to consider not only evaluation of runoff model but also accurate runoff component. In this study long-term runoffs were simulated by means of watershed runoff model and the amounts of runoff components such as upstream inflow, surface runoff, return flow and dam release were evaluated based on the concept of water budget. SSARR model was applied to Daecheong basin, the upstream region of Geum river basin, and in turn the monthly runoff discharges of main control points in the basin were analyzed. In addition, for the purpose of providing the basic quantified water resources data the conceptual runoff amounts were estimated with water budget analysis and the reliability of the observations and the monthly runoff characteristics were investigated in depth. The yearly runoff ratios were also estimated and compared with the observations. From the results of the main control points, Yongdam, Hotan, Okcheon and Daecheong, the yearly runoff ratios of those points are consistent well with data reported previously.

니켈 라테라이트광 황산침출액에 함유된 니켈과 코발트를 마그네슘으로부터 분리하는 것은 유가금속의 회수측면에서 중요하다. 세 금속간의 분리성을 조사하기 위해 니켈과 코발트 및 마그네슘이 단독으로 존재하는 황산용액과 혼합용액에서 Diphonix 수지에 의한 흡착거동을 조사하였다. 금속 농도는 100 ppm으로 고정시키고 황산용액의 pH를 5에서 7사이로 변화시켰다. 상온에서 Diphonix에 의한 세 금속이온의 흡착거동은 Langmuir 등온곡선과 잘 일치하였으며, 각 금속의 최대흡착량을 구했다. 세 금속이 혼합된 합성용액에서 Diphonix 농도에 따른 세 금속이온의 흡착거동은 동일하였으며 Diphonix 수지로 니켈과 코발트를 마그네슘으로부터 분리하는 것은 어렵다.

Several adsorbents were tried to remove the selenium ions from industrial wastewater and the following ascending order of the adsorption performance for the selenium at pH 9 was observed: cation exchange resin < chelate resin < zeolite < brown marine algae < granular activated carbon < anion exchange resin. Initial concentration of selenium(146 mg/L) in industrial wastewater was reduced to 63 mg/L of selenium at pH 9 by neutralization process. The maximum uptake of Se calculated from the Langmuir isotherm with anion exchange resin was 0.091 mmol/g at pH 10 and that with granular activated carbon was 0.083 mmol/g at pH 6. The affinity coefficients of Se ion towards anion exchange resin and granular activated carbon were 3.263 L/mmol at pH 10 and 0.873 L/mmol at pH 6, respectively. The sorption performance of anion exchange resin at the low concentration of Se, namely, was much better than that of granular activated carbon. The Se ions from industrial wastewater throughout neutralization process and two steps of adsorption using anion exchange resin was removed to 97.7%.

건조물문화재의 부식 및 노후화에 대한 보존수리는 원형유지를 기본원칙으로 하며, 수리로 인해 인위적인 훼손을 가하는 과오를 범해서도 안 된다. 따라서 합성수지를 이용한 보존처리방법이 부각되어지고 있다. 본 연구의 목적은 합성수지로 보강한 사각단면 목재의 휨 성능에 관한 연구로서 합성수지의 보강길이, 보강면적비율, 합성수지 재료강도, 보강위치를 변수로 하여 총 11개의 시험체를 제작하여 실험하였다. 이 연구의 결과는 목재의 휨 보강재로 합성수지의 보강효과가 있는 것으로 나타났으며, 사용 가능성을 확인할 수 있었다.

Lab-scale Electrodialysis(ED) system with different membranes combined with before or after pyroma process were carried out to remove nitrate from two pickling acid wastewater containing high concentrations of NO3-(≈150,000 mg/L) and F-(≈160,000 mg/L) and some heavy metals(Fe, Ti, and Cr). The ED system before Pyroma process(Sample A) was not successful in NO3- removal due to cation membrane fouling by the heavy metals, whereas, in the ED system after Pyroma process(Sample B), about 98% of nitrate was removed because of relatively low NO3- concentration (about 30,000 mg/L) and no heavy metals. Mono-selective membranes(CIMS/ACS) in ED system have no selectivity for nitrate compared to divalent-selective membranes(CMX/AMX). The operation time for nitrate removal time decreased with increasing the applied voltage from 10V to 15V with no difference in the nitrate removal rate between both voltages. Nitrate adsorption of a strong-base anion exchange resin of Cl- type was also conducted. The Freundlich model(R2 > 0.996) was fitted better than Langmuir model(R2 > 0.984) to the adsorption data. The maximum adsorption capacity (Q0) was 492 mg/g for Sample A and 111 mg/g for Sample B due to the difference in initial nitrate concentrations between the two wastewater samples. In the regeneration of ion exchange resins, the nitrate removal rate in the pickling acid wastewater decreased as the adsorption step was repeated because certain amount of adsorbed NO3- remained in the resins in spite of several desorption steps for regeneration. In conclusion, the optimum system configuration to treat pickling acid wastewater from stainless-steel industry is the multi-processes of the Pyroma-Electrodialysis-Ion exchange.

Based on the monthly weather report of Korea Meteorological Administration (KMA) and daily sea surface temperature (SST) data from National Fisheries Research and Development Institute (NFRDI) in 2006, heat budget was estimated at Gampo in the eastern coast of Korea, the region occuring the cold water known as upwelling in summer. Net heat flux was transported from the air to the sea surface during February to November, and it amounts to 345 Wm-2 in monthly mean value. During December to January, the transfer of net heat flux was conversed from the sea surface to the air with -56 Wm-2 in minimum of monthly mean value in January. Long wave radiation was ranged from 6 Wm-2 to 106 Wm-2. Sensible heat was varied from -36 Wm-2 (June) to 61 Wm-2 (February) and showed negative values from April to August. Latent heat showed 20 Wm-2 (July) with its minimum in July and 49 Wm-2 with its maximum in March in monthly mean value. The annual mean of net heat flux is 129 Wm-2, giving an annual heat surplus of 22 Wm-2. Thus, during summer, the upwelled cold water at Gampo, appears to compensate the heat gain. However the ways in which these compensations are accomplished remains to be clarified.

FRP 복합체의 함침ㆍ접착에 사용되는 에폭시 수지와 같은 2액형 접착제는 두 성분을 상호 혼합함으로써 경화반응이 시작되며, 일정 시간이 경과되면 접착제의 점도와 온도가 급격히 증가된다. 이와 같이 접착제의 점도가 증가되면 작업성과 접착력이 저하되므로, 현장에서의 작업은 시공연도(workability)가 유지되는 한계, 소위「사용가능시간(pot life)」이내에 완료되어야만 한다. 본 연구에서는 구조보강용 FRP 복합체의 함침ㆍ접착에 사용되는 에폭시 수지의 사용가능시간을 평가하기 위하여 기존에 제안되고 있는 점도변화법 및 발열온도상승법의 적합성을 검증하고, 실험결과의 비교ㆍ분석을 통하여 구조용 접착제의 사용가능시간을 보다 합리적으로 산정할 수 있는 시험방법 및 평가기준을 제안하였다.