검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 81

        21.
        2015.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In recent years, industrial demands for superior mechanical properties of powder metallurgy steel components with low cost are rapidly growing. Sinter hardening that combines sintering and heat treatment in continuous one step is cost-effective. The cooling rate during the sinter hardening process dominates material microstructures, which finally determine the mechanical properties of the parts. This research establishes a numerical model of the relation between various cooling rates and microstructures in a sinter hardenable material. The evolution of a martensitic phase in the treated microstructure during end quench tests using various cooling media of water, oil, and air is predicted from the cooling rate, which is influenced by cooling conditions, using the finite element method simulations. The effects of the cooling condition on the microstructure of the sinter hardening material are found. The obtained limiting size of the sinter hardening part is helpful to design complicate shaped components.
        4,000원
        22.
        2014.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In recent years, there was many conflagration about special structure such as wooden cultural assets, warehouses and factories. The common causes of increase in the fire damage were difficulty of the initial suppression and absence of equipment for appropriate disaster prevention. In this study, the destruction-spray nozzles, a core technology of destruction-spray fire vehicle which is possible for fire suppression of special structure was studied using the finite element method. As a result, the maximum deviation of the part nozzle was 18.1% compared with the reference value. Second, the maximum deviation of the nozzle module was 13.5% compared with the part nozzle. Third, the safety factor about internal pressure of the nozzle module was suitable as 13.6. Finally, the performance of the designed destruction-spray nozzle was satisfied with 4,652.1L/min in excess of the target performance.
        4,000원
        23.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Stress-strain curves are fundamental properties to study characteristics of materials. Flow stress curves of the powder materials are obtained by indirect testing methods, such as tensile test with the bulk materials and powder compaction test, because it is hard to measure the stress-strain curves of the powder materials using conventional uniax- ial tensile test due to the limitation of the size and shape of the specimen. Instrumented nanoindentation can measure mechanical properties of very small region from several nanometers to several micrometers, so nanoindentation tech- nique is suitable to obtain the stress-strain curve of the powder materials. In this study, a novel technique to obtain the stress-strain curves using the combination of instrumented nanoindentation and finite element method was introduced and the flow stress curves of Fe powder were measured. Then obtained stress-strain curves were verified by the com- parison of the experimental results and the FEA results for powder compaction test.
        4,000원
        25.
        2010.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper is presented for the analysis results of the bending problems of the anisotropic cylindrical shells. In the numerical analysis of various mechanical problems involving complex partial differential equations, Finite element method is used to analyze the governing equations of anisotropic cylindrical shells. Both thin shell theory and thick shell theory are used as the basic governing equations of bending problems in the anisotropic cylindrical shells. The analysis results are compared between the anisotropic thick cylindrical shells and the anisotropic thin cylindrical shells. The results of this study will be contribute to analyze the bending behavior of anisotropic cylindrical shells.
        4,000원
        26.
        2009.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Magnesium and its alloys are attractive as light weight structural/functional materials for high performance application in automobile and electronics industries due to their superior physical properties. In order to obtain high quality products manufactured by the magnesium powders, it is important to control and understand the densification behavior of the powders. The effect of the sheath surrounding the magnesium powders on the plastic deformation and densification behavior during equal channel angular pressing was investigated in the study by experimental and the finite element methods. A modified version of Lee-Kim's plastic yield criterion, notably known as the critical relative density model, was applied to simulate the densification behavior of magnesium powders. In addition, a new approach that extracts the mechanical characteristics of both the powder and the matrix was developed. The model was implemented into the finite element method, with which powder compaction under equal channel angular pressing was simulated.
        4,000원
        27.
        2009.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문에서는 다층탄성해석과 유한요소법을 사용하여 도로설계를 위한 도로내 주요 변형률을 계산하여 유사한 결과치를 양산하는 경우를 비교 분석하였다. 비록 유한요소법이 보다 나은 모델이라는 것이 입증되긴 했지만, 다층탄성해석 프로그램이 간편성으로 인해 여전히 도로설계를 위해 많이 사용되어 지고 있으므로 다층탄성해석 프로그램을 사용한 주요 변형률의 예측이 시급한 실정이다. 이 연구에서는 KENLAYER프로그램을 사용하여, 비선형 이방성 기층거동을 고려한 유한요소법을 사용했을 때 얻어지는 도로내 주요 변형을 예측할 수 있는 분석기법이 소개된다.
        4,000원
        29.
        2008.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        한국형 포장 콘크리트에 있어 구조해석은 다양한 입력변수와 공용성 모형을 연결해주는 중간 매개체 역할을 하고 있어 그 중 요도가 매우 크다. 본 연구에서는 ABAQUS 구조해석 프로그램을 Shell 요소를 이용하여 콘크리트 포장의 거동을 분석할 수 있는 구조해석 기본 모형을 구축하였다. 이 모형을 Closed-Form Solution과 정확성이 검증된 Everfe 프로그램, 그리고 Solid 요소 모형과 비교하여 정확도를 검증하였다. 기본 Shell 모형을 이용하여 다양한 변수에 대한 구조해석을 수행하였으며 그 결과를 DB화하였다. SPSS 통계 프로그램과 해석 결과를 바탕으로 회귀식을 개발하였으며 온도 응력, 상향 응력, 하향 응력을 산정할 수 있는 응력식을 제안하였다.
        4,800원
        31.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Magnesium and magnesium alloys are promising materials for light weight and high strength applications. In order to obtain homogeneous and high quality products in powder compaction and powder forging processes, it is very important to control density and density distributions in powder compacts. In this study, a model for densification of metallic powder is proposed for pure magnesium. The mode] considers the effect of powder characteristics using a pressure-dependent critical density yield criterion. Also with the new model, it was possible to obtain reasonable physical properties of pure magnesium powder using cold iso-state pressing. The proposed densification model was implemented into the finite element method code. The finite element analysis was applied to simulating die compaction of pure magnesium powders in order to investigate the density and effective strain distributions at room temperature.
        4,000원
        33.
        2007.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 비동질 반무한 평면에 대한 비례경계유한요소법의 식을 유도하고 수치예제를 해석하였다. 비례경계유한 요소법은 편미분 방정식을 경계방향으로는 유한요소와 같은 근사를 통해서 약화시키고 방사방향으로는 정확해를 사용하는 반 해석적인 방법으로, 방사방향으로 멱함수를 따라 탄성계수가 변화되는 반무한 평면에 대해서 관계식을 가상일의 원리에 근거하여 새로이 유도하였다. 이 과정에서 반무한평면의 거동이 Euler-Cauchy방정식을 따름을 보이고, 기존의 동질 반무한평면의 해석시 도입되던 로그모드가 비동질 반무한 평면의 해석에는 유효하지 않음을 보였다. 수치예제를 통하여 유도된 식이 타당한 거동을 보임을 증명하고 이 접근법이 실제 공학적 문제의 해결에 있어서 유용함을 보였다.
        4,000원
        34.
        2006.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        응답면기법, 유한요소법, 일차신뢰도법 그리고 반복 선형보간기법을 합리적으로 결합한 정교한 신뢰성해석 기법이 지진하중을 포함하는 단기 동적하중을 받는 복잡한 실제 비선형 동적구조계의 신뢰성 평가를 위하여 제안되었다. 기법은 하중 및 저항과 관련된 랜덤변수의 비선형성과 불확실성의 모든 중요 원천을 명시적으로 고려한다. 본 기법의 특징은 전통적 랜덤진동방법의 대안으로서 지진하중을 시간영역에서 적용하는 것이다. 실제 강프레임의 연결부에 대한 유연성을 표현하기 위하여 4-매개변수 리차드 모델을 사용하였다. 리차드 매개변수의 불확실성에 대한 고려도 알고리즘에 포함하였다. 다음으로 횡방향으로 유연한 강프레임을 철근콘크리트 전단벽으로 보강하였다. 균열 발생 후 전단벽에서의 강도저감 또한 고려되었다. 강절 연결부를 갖는 횡방향으로 유연한 강프레임, 각기 다른 강성의 부분강절 연결부를 갖는 강프레임, 그리고 콘크리트 전단벽으로 보강된 강프레임의 세 구조물을 고려함으로써 실제 구조물의 신뢰성평가를 위한 기법의 적용성을 검증하였다.
        4,800원
        35.
        2006.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 파 해석에 있어서 공간-시간 분할 개념을 도입하여 켈러킨 방법으로 해석하였다. 공간-시간 유한요소법은 오직 공간에 대해서만 분할하는 일반적인 유한요소법보다 간편하다. 비교적 큰 시간간격에 대해서 공간과 시간을 동시에 분할하는 방법을 제시하며 가중잔차법이 공간-시간 영역에서 유한요소 정식화에 이용되었다. 큰 시간 간격으로 인하여 문제의 해가 발산하는 경우가 동적인 문제에서 흔히 발생한다. 이러한 결점을 보완한 사각형 공간-시간 요소를 취하여 문제를 해석하고 해의 안정에 대해 기술하였다. 다수의 수치해석을 통하여 이 방법이 효과적 임을 알 수 있었다.
        4,000원
        38.
        2004.05 구독 인증기관 무료, 개인회원 유료
        The vertical impact crusher is the machine which could produce artifical sand similar to natural aggregates in the site of guarry and pits. FEM was used to analyse the stress and strength of the machine at high rotational speed. The test specimen was made from the same material as the shaft and tension tests were conducted. The Shaft under extreme conditions was analysed to determine maximum stress level and its location from the results. The maximum level of stress and its location could be predicted.
        4,000원
        39.
        2004.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        응력확대계수는 균열진전경로의 수치해석적 연구에서 널리 사용되고 있다. 그러나 많은 경우에서 균열선단주위 응력의 급수전개식 중 이어지는 항은 정량적으로 중요하다. 따라서 본 연구에서는 이의 항을 계산하기 위하여 등매개 2차특이요소를 이용한 유한요소해석을 수행하였다. 일례로 단축하중을 받는 무한 직방성체 내 경사균열에 대하여 균열요소크기와 균열경사각을 달리 주어 가며 해석을 수행하였으며, 수치해석결과는 이론해와 비교하여 잘 일치하고 있다.
        4,000원
        40.
        2003.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 중고주파수 영역에서 진동하는 단순평판의 진동을 해석하기 위하여 파워흐름유한요소법을 적용하였다. 파워흐름해석법에서 주어지는 진동 에너지지배방정식의 해를 구하기 위한 수치해석 도구로써 유한요소법을 활용하였다. 이러한 파워흐름유한요소법을 적용하여 중고주파수 영역에서 진동하는 단순평판의 진동 변위와 진동인텐시티 분포를 구하였다. 또한 수치해 결과를 엄밀해와 유한요소법에 의한 근사해와 비교함으로써, 파워흐름유한요소법은 중고주파수 영역에서 진동 변위 및 진동 인텐시티를 예측하기 위하여 효과적으로 적용될 수 있음을 보였다.
        4,000원
        1 2 3 4 5