간행물
대한안전경영과학회 학술대회
- 발행기관 대한안전경영과학회
- 자료유형 학술대회
- 간기 연간
- 수록기간 1999 ~ 2022
- 주제분류 공학 > 안전공학 공학 분류의 다른 간행물
- 십진분류KDC 530DDC 620
권호리스트/논문검색
2004년도 대한안전경영과학회 춘계학술대회 (2004년 5월) 40건
1.
2004.05
구독 인증기관 무료, 개인회원 유료
Need safety diagnostic indicator pointer that is objective as estimation basis to be scientific and manages systematically safety existing condition and level for city gas facilities. Safety diagnostic indicator pointer can divide by greatly two. One is management (Software) side that one that differ with mechanical (Hardware) side that handle laying stress on equipment connected with safety manages organization and management connected with safety. Weight appropriates according to specific gravity that relevant element occupies in facilities. To give so big value in particular element in grant of weight pays attention because break balance of whole guideline and should gives. Finally, efficient safety net may see effect before self-regulation inside by minimum target establishment by government and legal, systematic countermeasure establishment for this, strict law application and each business proprietor and though activity and user's active safety activity forms harmony properly.
3,000원
2.
2004.05
구독 인증기관 무료, 개인회원 유료
Domestic city gas is supplying in an about 10 million household on present 34 city gas companies because is begun to supply regularly after two 1980 years middle. But, result that focus on city gas supply spread and stable supply for supply area and neglects about safety problem, hundreds casualties such as Ahyun explosion accident and Deagu city gas explosion accident were reached in situation that occurred large size calamity occurs it is dizzliness. In the case of advanced nation, can see that accomplish system and progress that in technology after experience major accident. Therefore, grasp problem investigating safety actual conditions for city gas institution and study about solvable plan is required this. Also, must guide reform and level elevation of a domestic company safety technology through induction and development of safety technology that is suitable in supply, domestic real condition etc. Must help in power positivity that is full text executing high-quality safety education about step High firing mechanism safety technology than present safety education.
3,000원
3.
2004.05
구독 인증기관 무료, 개인회원 유료
5,100원
4.
2004.05
구독 인증기관 무료, 개인회원 유료
With Zohar(l980)'s research on safety climate and industrial safety, occupational safety and health literatures begin to emphasize the influence of organizational context. Based on this research trend, this paper tried to review the relationship between safety efforts and employee safety participation, and the moderating effect of safety motivation on such relationship. Based on the responses from 643 manufacturing workers, the results of statistical analysis showed that company precaution activity and management safety involvement have affirmative effects on the employee safety participation, but safety education has not. The extent precaution activity forces on participation activity is proved to be influenced by employee safety motivation.
4,000원
5.
2004.05
구독 인증기관 무료, 개인회원 유료
The chemical factory deals with dangerous element and more advance, human-error analyzes and becomes effective research for the country and region, this paper analyes the form of work-miss on human-error according to a safety accident for domestic chemical factory from 1999-2002. It include the present contents and raise issues human knowledge, behavior, judgment, sensibility as an important counterplan that makes the safety solution of work miss. For the point of view of human knowledge, it takes color standard for works to be effective in work place. for behavior, the test has been for risk point of work place and infra worker movement, also the workers performed professional work as classify according to work. for judgement, the valuation sheet is reflected to minimize the human -error and the 3rd supervisor does a cross-check audit beforehand. For sensibility, it is applicable for human relations, information, communication by program to the consciousness and an attitude of worker-supervisor.
4,000원
6.
2004.05
구독 인증기관 무료, 개인회원 유료
본 연구에서는 독립적인 수요를 가지는 제품에 대한 효율적인 물류망을 구축하기 위한 방법으로 공장-중앙창고-지역창고를 포함하는 2단계 설비입지문제의 수학적 모형을 구축하고 해를 구하였다. 구축된 모형은 공장에서 서비스 지역내의 중앙창고로 제품을 수송하는 단계와 중앙 창고에서 하부 서비스 지역의 지역창고(대리점)로 경로를 통하여 제품을 배송하는 2단계 수송시스템을 고려하였다. 구축된 토형의 총비용은 수송비(수송비+배송비(정상배송+추가배송)), 중앙창고 재고비(정상재고+안전재고), 창고비(중앙창고+지역창고) 및 확장 EOQ를 고려한 지역창고 총비용의 합을 최소로 하는 중앙창고 수와 지역창고(대리점 등) 수를 결정하고 각각의 중앙창고가 서비스하는 지역창고 수 및 지역창고의 경제적인 1회 발주량과 최대 재고부족량을 결정하고 분석하였다.
4,000원
7.
2004.05
구독 인증기관·개인회원 무료
8.
2004.05
구독 인증기관·개인회원 무료
9.
2004.05
구독 인증기관 무료, 개인회원 유료
RFID(Radio Frequency Identification)는 재고의 위치를 쉽게 파악할 수 있고, 적재하는 위치나 장소가 바뀌는 경우에 재고의 현황을 알 수 있다. 많은 정보를 태그에 보관할 수 있어 제품관리가 용이하다. 제품의 이력상태를 바로 알 수 있으며, 열이나 물 등의 이유로 인하여 바코드를 사용할 수 없는 곳이나 공정에서도 사용할 수 있다. RFID는 바코드 시스템의 장점을 포함하고 있고 제품개체에 대한 실시간 파악이 가능하다. 이러한 장점으로 인하여 RFID는 유통 및 생산시스템 사용이 크게 확대될 것이다. RFID를 이용하면 Just In Time 생산을 보다 효율적으로 운영할 수 있다. 본 연구에서는 RFID를 이용하여 간판생산방식의 도입에 적용하는 데 있다.
4,000원
10.
2004.05
구독 인증기관 무료, 개인회원 유료
As technique that can contribute in quality improvement in design process to overcome shortcoming of traditional quality control, call design or development department quality control activity that is achieved to reduce gun damage shuddering at circle minimizing change or side effect of product performance as off-line quality control. This paper discuss optimal process design of investment projects expansion and replacement investment on each line or individual in the production. Generally optimal plant design has add to a few method by Subsidiary means with use a especial method. And then in this paper, a Robust design is presented, which may be effective to the processes appraisal or improvement. We propose that should make a optimal plant design model for reducing field failure rate to assign by real data on different factors in plant system. Using this model, robust design of taguchi method used in this comprehensive method for reducing field failure rate in plant system.
4,000원
11.
2004.05
구독 인증기관 무료, 개인회원 유료
4,600원
12.
2004.05
구독 인증기관 무료, 개인회원 유료
4,300원
13.
2004.05
구독 인증기관 무료, 개인회원 유료
4,200원
14.
2004.05
구독 인증기관 무료, 개인회원 유료
4,300원
15.
2004.05
구독 인증기관 무료, 개인회원 유료
In U.S.A., minimum wage of New Jersey in April 1, 1992 rose from $4.25 to $5.05. At this assession, there was survey by 410 numbers related back and pro minimum wage in New Jersey and eastern Pennsylvania.. At stores of New Jersey and eastern Pennsylvania, comparison of the increase of employment at constant minimum wag is with estimative effect of increase of minimum wage. Through comparison of stores of low wage and high wage above $5, employment volatility in New Jersey was studied. In U.S.A., increase of minimum wage was not caused to reduce to employment. Contrary to this, result of Korea was not consisted after timing of IMF bailout of 1997. It is because drop of revenue was caused to decrease employees of part-time and full-time job at the viewpoint of cost minimization.
4,200원
16.
2004.05
구독 인증기관 무료, 개인회원 유료
Environmental factors for automotive consist of temperature, humidity, vibration(sine & random), gas, an electrical load and so on. These environmental factors are impressed in a automotive. Dependability is essential requirement in many electronic parts. Among components of automotive, the connector connecting electrical signals is one of the most important parts. Automotive -connector is inspected according to each manufacturer's test standard in which dependability should be considered. This paper aims to verify that current test standard is suitable for dependability, and present an inductive life test for automotive connector based on the field data in use-condition.
4,000원
17.
2004.05
구독 인증기관 무료, 개인회원 유료
Consumers require various quality characteristics including safety. The reduction of risk concerned on product safety becomes urgent issue in leading companies. The strategy for customer satisfaction by choosing attractive quality characteristic is not enough for risk reduction in view of producer. This paper presents a method for choosing quality characteristics and risk characteristics by integrating QFD based on quality requirements and AHP based on safety requirements, also shows its application for complex equipment.
4,000원
18.
2004.05
구독 인증기관 무료, 개인회원 유료
Reliability assurance problem is an important issue in advanced company with good R&D capacity. In Korea, long-term and large-scale project for reliability improvement and certification have been conducted from 2000, 4 years ago. Generally, assurance is composed of system assurance and lot assurance. For reliability lot assurance. it is prerequisite to development reliability sampling plan with time-saving and minimum cost. In this paper, we aim to investigate previous study on reliability lot assurance focused on reliability sampling plans and propose some suggestions for the future study.
4,000원
19.
2004.05
구독 인증기관 무료, 개인회원 유료
There are various types of PLM(product liability management) according to corporation management level. It is necessary to develop diagnostic methods and application systems for PLM as well as to establish an efficient PLM system. This paper aims to propose a PLM system which can be applied to product with high-reliability and high-safety, and diagnostic methods for PLM based on AHP, and also show an empirical application of the proposed PL management system for Auto Test Robot System of the Mobile Phone (EVT 4320).
4,000원
20.
2004.05
구독 인증기관 무료, 개인회원 유료
IEC 60300 series, the international standards on reliability management system are newly developed and introduced rapidly worldwide. In order to meet this fast-changing situation, it is necessary to apply them to the Korean industries effectively. It includes the establishment of the infrastructure such as documentation of Korean Standards, introduction of test equipments and test manuals, accreditation of the certification body and training of the specialists etc. IEC 60300 is upgraded management system of the ISO 9000 and ISO 14000. In this regard, the Korean companies which was certified with the ISO 9000 or 14000 should endeavor to find new strategies and methods to be certified with ISO 60300. This paper introduces a quantitative method of estimating the level of the reliability management system by applying the MIR(Maturity Index on Reliability) technique. This enables the estimation of the operation level of the system and can upgrade the maturity level of it.
4,000원
1
2
