Risk Assessment, a basis of health and safety management system, is an calamity prevention activity which regularly measure the level of a risk to passively improve potential hazard. A problem, the assessment not being improved to be applied to the construction work site where requires diversity and complexity, causes the assessment to be inefficient to bring quality results. A study on the investigates and compares the surveyed degree of recognitions of workers who works in companies executing the risk assessment By the investigation and comparison, it is expected to bring the better solution for early and efficient application for those companies which are not taking the risk assessment.
The unsafe act and unsafe condition is induced by the fundamental cause factors of industrial accidents. In this paper, stress is classified into job, life and workplace stress. Therefore, the purpose of this paper is to develop a Korean stress model focused on the unmarried workers in order to prevent fundamental industrial accidents. The results of this paper are followed. First, the oriental culture and idea in Korea is directly connected to the central axis of all life. Accordingly, concrete and systematic safety management methods should be proposed from the point of Korean culture. Finally, the industrial accident questionnaire needs an item that reports the mental and physical condition of workers in order to prevent occupational diseases.
As contemporary building construction type is getting higher and deeper,construction equipment usage is getting more, and related fatal accidents are on an increasing trend. In these days, due to the deteriorating construction business circumstance, job finding problem of equipment operator, and dumping contract, equipment lease suppliers are putin jeopardy. In high-rise building construction, especially tower crane, mobile elevated work platform and other High place operation cars among construction equipment cause many critical accidents because of drop supply of construction biding bringing out dumping contract could cause unsafe and poor construction management. Because of this, a method was drawn which could grasp the present state of construction equipment management and manage safety of the equipment more easily for accident prevention by choosing 2 kinds of Construction equipment which cause safety accident frequently among the equipment mainly used in construction site. This study suggested a method about construction equipment safety management using ‘‘smart phone’ base which could be used in safety management for construction equipment by whomever in construction site. After attachment of QR code included safety checklist, It became possible that site managers could check more efficiently by scanning with their smart phone when they inspect equipment. Moreover, by the construction interested who didn’t know what and how they have to inspect could point out unsafe condition in the early stage of equipment entering or take unsafe one out of the site by using new smart phone safety checking system is installed, it became possible that critical accident caused by construction equipment was prevented in advance.
The research presents a guideline for quality practitioners to provide a full comprehension of differences in theoretical and practical interpretations of assumed sampling errors of and significance probability of calculated p-value. Besides, the study recommends the use of statistical inferences methods with known parameters to identify the improvement effects. In practice, the quality practitioners obtain the known parameters through systematic quality Database (DB) activities.
While technological development being rapid, competition among companies have been very intensive over the world. To hold their competitive power or make sustainable development, it is very imperative for them to attempt innovation. But almost of all innovations were followed by people's resistance to change, and many innovation appeared to be not successful. The objective of this paper is to review the topic of resistance to change in the related literature, and look at the relationship between innovation resistance and many variables like CEO's personality, employee's personality, organizational culture, and defensive behavior.
In the ALC(Autoclaved lightweight concrete) manufacturing process, if the pre-cured semi-cake is removed after proper time is passed, it will be hard to retain the moisture and be easily cracked. Therefore, in this research, we took the research by multiple regression analysis to find relationship between variables for the prediction the hardness that is the control standard of the removal time. We study the relationship between Independent variables such as the V/T(Vibration Time), V/T movement, expansion height, curing time, placing temperature, Rising and C/S ratio and the Dependent variables, the hardness by multiple regression analysis. In this study, first, we calculated regression equation by the regression analysis, then we tried phased regression analysis, best subset regression analysis and residual analysis. At last, we could verify curing time, placing temperature, Rising and C/S ratio influence to the hardness by the estimated regression equation.
A fundamental concepts of business environment changes and the importance of stakeholder's value creation is changing in the business. This study ISO9004: 2009 quality management system of Category 5: Strategy and Policy, Category 10: improvement, innovation and learning (Note) SBK target was to develop a model that is the company's sustained success. Three concepts of the new revision of ISO9004 "in response to environmental changes," "learning", "innovation" (Note) SBK applied to the project settings and talent establish long-term vision was to establish the process as the organization's learning content was TDR for the creation of exceptional and innovative programs were introduced. As a result, (Note) SBK three years of continuous business performance indicator has grown dramatically to more than 50% continued success is going to create business models. But 100 years to accomplish the vision, ISO9004 model needs to extends the entire category as a management system to achieve the optimization needed.
이 논문은 기존의 포트폴리오와 관련된 모형에 경기변동(business cycle)과 관련된 변수들을 포함하였을 경우 경기변동이 개인투자자들의 현금 및 주식보유를 통한 자본 이득 극대화와 어떤 관련성이 있는지와 관련된 것이다. 기존 문헌들을 살펴보면, 개인 투자자들은 경기호황기에는 모멘텀 투자와 소형주와 성장주 등에 포트폴리오를 분산 투자하지만 경기가 침체기(recession)에 들어설 경우 수익률이 급등락하는 특성을 지니 는 소형주(small cap)에 집중적인 투자를 하는 성향을 나타내고 있다. 한편 이 논문의 분석결과에 따르면, 경기안정과 금리안정정책, 물가안정 등은 서로 상충관계(trade-off)에 놓여 있음에도 불구하고 코스피수익률과 코스닥수익률에 모두 향후 영향을 미칠 것으로 판단된다. 이는 현재까지의 정책조합(policy mix)보다 더 정 교하고 타이밍을 잘 포착하지 않으면 정책실패에 따른 경기와 물가불안이 동시에 나 타나는 스태그 플레이션(stagflation)으로 이어질 수 있음으로 정책집행의 효율성이 어 느 때보다도 중요해 질 것으로 보인다.
Recently, by the whole world paradigm shift to “Low Carbon Green Growth", it is required to renovate National Transportation and Logistics System. Transportation accounts for 21% of the total energy consumption and 20% of the total CO2 emission, and also places its main reliance on fossil fuels. From green point of view, electric railway system is superior to the other transportation alternatives, but also required to develop the innovative technologies for high efficiency and low energy consumption. In this paper, the concept of railway green operation system by regenerative synchronized driving is presented, including the numerical example and the estimated effect.
최근 GPS와 Wi-Fi가 내장된 스마트폰의 보급으로 이를 이용한 위치기반 서비스 (Location-based Service)가 발전하고 있다. 하지만 위치기반 서비스들의 오차 범위는 3∼4m 내외로 크기 때문에 사용자들은 더 정확한 위치를 제공하기를 바라고 있다. 본 논문에서 위치기반 서비스의 핵심기능을 담당하는 측위기술 중 흔히 사용되고 있는 삼각측량법을 활용하여 핑거프린트 방법의 측위오차를 줄일 수 있는 방안을 연구하였 고 프로그램으로 구현한 후 테스트를 실시하였다. 프로그램은 Labview2010으로 구현 하였고, 각각의 알고리즘을 모듈화하여 필터링 적용 전 후 및 개선효과를 비교하기 쉽 도록 구성하였다. 실내 테스트는 인하대학교의 강의실에서 실시하였고 실외 테스트는 인하대학교 운동장에서 실시하였다. 테스트 결과 실내의 경우 본 논문에서 제시하는 필터링 방법을 적용하기 전의 오차가 1.02미터에서 0.83미터로 감소하였고 실외에서는 0.74미터에서 0.54미터로 오차가 감소하였다.
본 연구는 Supply Chain Process 측면에서 MFCA를 활용할 수 있는 방안으로 현장 의 7대 낭비 요소를 물류 기능에 접목하여 MFCA를 도입할 수 있는 요소들을 알아보 고 다양한 연구 사례를 들어 도입 가능성을 검토하였다. 7대 현장 낭비인 과잉 생산, 대기, 운반, 가공, 재고, 동작, 불량의 낭비에 물류 기능 으로 정의된 저장, 하역, 운송, 포장, 정보, 유통가공 등의 측면을 대상으로 각 기능에 적용가능한 요소들을 재정립하고, GCM(Green Chain Management) 측면에서 여러 사 례들을 조사하여 물류 분야에서 CO2를 저감할 수 있는 방안들을 사례로 제시하였다. 이를 통해 낭비에 대한 층별화, 가시화, 효율화 접근이 가능하며 실질적 성과를 창출 하여 제조원가의 경쟁력을 확보할 수 있으며, 공해 및 폐기물 저감을 통한 환경 보전 에 기여할 수 있을 것으로 기대된다.
The construction industry in Korea after the Korean-war has evolved until these days. But the construction industry accident severity rate and frequency is over then the All industry rate. This study analyzed the 'Disaster Statistical Yearbook' of the Korea Occupational Safety and Health Agency, based on the factors that affect construction accidents that is selected and fined the some factors the construction Disaster Prevention Factors. This study will develop the methodology for analyzes that the national qualification is effected to the construction industrial machine disaster prevention status. It suggest two ways to the establishment of disaster trends. First way is the disaster quantitative analysis and second way is comparing the statistical data and the analysis of expert opinion