열정적 톤과, 영감을 일으키는 리듬과 구문으로 된, 󰡔탑󰡕(1928년)과 󰡔나선형 계단과 기타 시들󰡕(1933년)은 우울함과 분노로 차 있으나, 절망을 거부하는 힘으로, 비통함에서 긍정적 정신을 짜낸다. 한 마디로 이런 특징을 정의하면, 확신−즉, 수사적, 극적, 자기 극화적, 영웅적−확신이라 할 수 있는데, 시인은 이것으로 경험의 공적, 사적 영역 사이의 놀라운 결합을 만들어 낸다.

For the past 25 years, Korean semiconductor has experienced enormous growth to be the highest production country in the world. Semiconductor industry is very time sensitive and driven by technology and process, and requires 24-hour full operation. The environment includes many different types of equipment, utilities, different gases and toxic chemicals as well as high voltage electricity. We have performed a survey with 3-shift engineers and workers in one line. The content of the questionnaire was about the correlation between fatigue and performance shaping factor (work type and work ability), and as a result we were able to deduce the correlation, p-value and the pattern of scatter plot. The shape of the model was made of 4 blocks for fatigue, 5 blocks for work type and 5 blocks for work ability, i. e. 14 blocks in total. As a conclusion to this findings, there was a correlation between fatigue and work type and work ability specifically in semiconductor industry, and we need some effort to reduce this.

  Enhanced machine reliability has dramatically reduced the rate and number of railway accidents but for further reduction human error should be considered together that accounts for about 20% of the accidents. Therefore, the objective of this study was t

Can the information-holder on the Internet control the flow of information within his boundary even when he does not possess any proprietary right over the information? What if someone accesses to the information and obtain it without any approval? This article intends to provide comprehensive responses to these fundamental issues, mainly from the Korean perspective. To facilitate the analysis, eBay Inc. vs. Bidder’s Edge, Inc, one of the landmark U.S. court decisions in this regard, is introduced and examined here. This article categorizes a wide variety of disputes into three types. The first type is the proprietary dispute, focusing on the protection of computer system as a chattel. The traditional trespass theory will be applied, and actual harm will be required to justify injunctions. The Second type is the access dispute. The article 48 of the“ Information Network Act”in Korea will play a crucial role in determining the unlawfulness of the access on the Internet. The interpretation of the above article requires the balance between information holders and the information users. The third and the final type is the information property related dispute. Laws on Intellectual property right and related legislations will govern this type of dispute. To narrow down the gap between the body of traditional legal theory and the recent changes in the legal environment brought on by technological advances, a new set of legal norms is needed. Korea has been responding to this challenge by legislating relevant acts in an ad hoc way. Relatively few attention has been devoted to the whole frame of norms with regard to the unlawfulness issue in response to the Internet. This article, however, endeavors to emphasize the systematic and comprehensive approach and to suggest the general standards by which unlawfulness of the information related disputes can be measured.

본 연구에서는 케이블구조의 초기형상해석을 위한 새로운 탄성포물선 케이블요소(elastic parabolic cable element)를 제시한다. 이를 위하여 먼저 탄성현수선 케이블요소(elastic catenary cable element)에 대한 적합조건과 접선강도행렬 유도과정을 간략히 한다. 이를 토대로 장력이 충분히 도입되어 자중에 의한 처짐 형상이 포물선에 가깝다는 가정 하에서 무응력길이를 포함하는 탄성포물선 케이블요소의 비선형 힘-변형관계식과 접선강도행렬을 유도한다. 또한 현(chord) 방향으로 두 케이블요소의 등가 장력식을 정의한다. 본 요소의 정확성을 확인하기 위하여, 탄성현수선과 탄성포물선 케이블요소를 각각 적용하여 고정하중을 받는 사장교의 초기형상해석을 수행하고 무응력길이, 등가장력, 그리고 최대장력 결과를 비교, 분석한다.

In this present investigation, Metal Injection Moulding (MIM) of M2 High Speed Steel (HSS) parts using a wax-High Density Polyethylene (HDPE) binder is shown. The elimination of organic binder was carried out by thermal debinding under inert atmosphere. In order to keep carbon in the sample that could improve the sintering process, incomplete debinding was performed between 450 and . The specimens were sintered at temperatures between 1210 and in high vacuum atmosphere, obtaining the 98% of the theoretical density. In the samples with higher residual carbon content, the sintering window was extended up to 20 degrees and the optimum temperature was lower.

Animation character design is the soul of animation creation. Excellent animation character design can promote the development of the plot, reflect the value of the work itself, and lay a good foundation for the success of the film. The paper takes the domestic animation movie I Am What I Am as an example, and studies the characteristics of a credible, respectable and lovely Chinese animation character image from the relationship between animation character design and animation film, the spiritual image design of animation character, and the styling design of animation character. The Chinese animated film I Am What I Am is created with realistic themes, and tells the story of the main character’s struggle for his dream, creating a credible, respectable and lovely Chinese spiritual image. However, the character’s features and shape are overly exaggerated, lacking in beauty, and not unified with the purely realistic style of scenes and props. Therefore, domestic animation creators need to pay attention to the all-round beauty and style characteristics of the character, and design a credible, lovely and respectable Chinese animation character image.

This paper is a revision of my earlier suggestion (2006) that the form of NPs is determined after all the features are specified for the computation under the assumptions of Multiple Spheres Hypothesis. Adopting the DM-based notions of morphological shaping (Heinat 2006, Safir 2011), I develop the proposal, arguing that the choice between the ‘-self’ form and the pronominal form is determined after the computation of root NPs is accomplished by Free Merge operation in multiple Membranes (Im 2013).

Suppressing residual vibrations of flexible materials cheaply is an important issue to increase productivity of automated factory using wafer or glass handling robots. In this paper, we present Linux/RTAI-based implementation of input shaping control for reducing residual vibrations of a mechanical system. Experimental results show that residual vibrations of the mechanical system are reduced up to 82% at a point-to-point linear motion.

컴퓨터 시뮬레이션을 통해서 레이더 타겟들에 대한 레이더 유효면적(RCS)을 측정하고, 그들의 성능특성을 분석하였다. 또한, 상용레이더 리프렉터의 구조적 특징을 검토하였다. 그리고, 수동형 레이더 리프렉터의 최적 설계조건을 선택했다. 연구결과, X-band(λ=3.2cm에서 10λ 크기의 원형 평판으로 구성된 옥타헤데랄 형태의 레이더 리프렉터가 최적 성능을 나타냈다. 그러나, 새로 적용될 2000 SOLAS 규정을 수용하기 위해서는 X-band 와 S-band 모두에 적용하기 위해서 더 큰 크기의 원형평판이 필요하다.