원자전달 라디칼 중합을 이용하여 polystyrene-b-poly(oxyethylene methacrylate) (PS-b-POEM) 블록 공중합체를 합성하고, FT-IR을 통해 중합이 성공적으로 이루어졌음을 확인하였다. 또한 자기 조립된 블록 공중합체 막을 제조한 후, 전구체 AgCF3SO3 도입과 UV 조사를 통해 고체상에서 은 나노입자를 성장시켰다. TEM 전자현미경과 UV-visible 분광학 분석을 통해 블록 공중합체 막의 내부에 은 나노입자가 형성된 것을 확인하였고, 또한 친수성 POEM 영역의 함량을 조절함으로써 나노입자의 크기를 조절할 수 있었다. 금속 나노입자를 제조하는 데 있어서 POEM 함량이 적은 블록 공중합체가 더 효과적임을 확인하였다.

This study was conducted to investigate optimal conditions for formation of synnemata from Beauveria bassiana. The strain of B. bassiana was isolated from a host of Oncotympana fuscata in Halla mountain of Jeju island. The yield of synnemata was the highest at application of brown rice (90%) and silkworm pupae (10%) media. On the other hand, the other media did not result in formation of synnemata. The highest formation of synnemata was achieved at conditions of moderate air inflow and 20℃. The optimal moisture and light intensity for formation of synnemata were 60% and 300 lux, respectively. In addition, inoculation of the liquid spawn resulted in higher yield than that of asexual spore.

본 연구에서는 OPU를 통한 체내 유래 난자를 이용한 수정란 생산 시 1개월에서 6개월까지의 연구 기간에 따른 난포 생성수, 난자 회수율, 난자 등급율, 배반포 생성률을 분석하여 공란우의 활용 기간에 관하여 조사하였다. 1. 채란 기간에 따른 난포 생성수는 1개월에서 5개월까지의 난포 생성수는 , , , , 개로 유의적인 차이가 없었으나, 6개월째에는개로 급격하게 줄어든 것을 알 수 있었다. 2. 채란 기간에 따른 난자 회수개수는 1개월에서 3개월까지는

In this study, a new, relatively simple fabrication method for forming a mesoporous Al(OH)3 film onAl substrates was demonstrated. This method, i.e., alkali surface modification, was simply comprised of dippingthe substrate in a 5×10-3M NaOH solution at 80oC for one minute and then immersing it in boiling waterfor 30 minutes. After alkali surface modification, a mesoporous Al(OH)3 film was formed on the Al substrate,and its chemical state and crystal structure were confirmed by XPS and TEM. According to the results of theXPS analysis, the flake-like morphology after the alkali surface modification was mainly composed of Al(OH)3,with a small amount of Al2O3. The mesoporous Al(OH)3 layer was composed of three regions: an amorphous-rich region, a region of mixed amorphous and crystal domains, and a crystalline-rich region near the Al(OH)3layer surface. It was confirmed that the stabilization process in the alkali surface modification stronglyinfluenced the crystallization of the mesoporous Al(OH)3 layer.

충남 보령 지역 트라이아스기 후기 하조층은 충남분지의 최하위층으로서 하부는 주로 각력암이나 역암, 중부는 역암, 상부는 역암과 사암이 호층을 이루고 있다. 하조층은 입자지지 수평층리 역암, 입자지지 균질 각력암, 기질지지 균질 역암, 기질지지 점이층리 역암, 역질 사암, 평행 엽층리 사암, 균질 사암, 정상 점이층리 사암, 역전점이층리 사암, 판상 사층리 사암, 곡상 사층리 사암, 저경사 사층리 사암 그리고 이암의 13개의 암상으로 구성되고 이들은 4개의 상조합을 이룬다. 상조합 I은 테일러스나 상부 선상지 삼각주에서 퇴적된 것으로 보이는 입자지지 및 기질지지 균질 각력암으로 구성되어 있다. 상조합 II는 기질지지 균질 역암과 수평층리 입자지지 역암으로 구성되고 상부선상지 삼각주에서 퇴적된 것으로 보인다. 상조합 III은 기질지지 균질 역암, 평행엽층리 사암 및 균질 사암으로 구성되고 중부선상지 삼각주에서 퇴적된 것으로 보인다. 상조합 IV는 균질 역질 사암, 수평엽층리 사암과 균질 사암으로 구성되고 하부선상지 삼각주에서 퇴적된 것으로 보인다. 전체적으로 보아 하조층은 초기는 테일러스와 상부 선상지 삼각주 환경에서 퇴적되고, 중기는 상부 선상지 삼각주와 중부 선상지 삼각주가 교호한 환경에서 퇴적되었으며, 말기에는 중부 선상지 삼각주와 하부 선상지 삼각주가 교호하는 환경에서 퇴적된 것으로 해석된다.

There have been significant changes to family values and the types of families have diversi-fied. This phenomenon gave way to the rise of the lower fertility and aging society, and could also cause disorganization or crisis of family in the future. It has now become necessary to build family-friendly values through the new education envi-ronment, Web 2.0. Social Network Service (SNS), the main idea of this study, represents one type of the new environment. It is a vital and well-matched concept with family-friendly val-ues. The paradigm shift in education has features such as interaction, relationship and com-munication. The purpose of this study was to suggest feasibility of Social Network Service for forming family-friendly values. To verify the feasibility, four family websites in Korea were examined with the research method of SWOT Analysis. To find strategies, SWOT factors were identified as follows; 1) Strength factors of Social Network Service for family-friendly values formation: free ser-vice, diverse functions, and global interactivity through language service. 2) Weakness factors: unstable, virtual disorder resulting from too many functions, and lack of user directedness. 3) Opportunity factors: increasing needs of family value education and improvement to mul-ticultural society. 4) Threat factors: digital literacy divide between old and new generation and decreasing time to communicate with family. In this study, the following seven strategies were extracted through SWOT analysis: 1) Practice educational paradigm shift: Web 2.0 2) Change educational settings in multicultural society 3) Challenge media convergence 4) Represent ability of ubiquitous learning 5) Promote interactivity across all age groups, taking into account life cycle 6) Present user-directed interfaces 7) Conduct instructional contents or curriculum with blended learning at K-12 Keywords: Family friendly values, Web 2.0, Learning 2.0, SWOT Analysis

본 연구의 목적은 망원경에서 별빛이 결상되는 원리를 교사들이 어떻게 이해하고 있는지를 알아보고자 하는 것이다. 경기도와 서울지역의 지구과학 교사 101명을 대상으로 설명식 지필문항 검사를 수행하고, 지구과학교육 전공자 3명이 교차분석을 실시하였다. 대부분의 교사들이 볼록렌즈에서 상이 형성되는 과정에 대한 체계적인 개념을 가지고 있지 않았고, 특히 상의 개념과 스크린의 역할에 대한 이해가 많이 부족하였다. 또한 망원경에서 별빛이 결상되는 원리에 대한 과학적 개념을 가지고 있는 교사는 참여교사의 3%로 극히 낮았으며 거의 대부분의 교사들이 볼록렌즈나 빛의 단편적인 성질을 이용하여 별빛의 결상을 이해를 시도하는 비과학적 혹은 대체개념을 가지고 있는 것으로 나타났다.

BiFeO3 (BFO) thin films were prepared on Pt/TiO2/Si substrate by r.f. magnetron sputtering. The effects of deposition pressure on electrical properties were investigated using measurement of dielectric properties, leakage current and polarization. When BFO targets were prepared, Fe atoms were substituted with Mn 0.05% to increase electrical resistivity of films. (Fe+Mn)/Bi ratio of BFO thin films increases with increasing partial pressure of O2 gas. The deposited films showed the only BFO phase at 10 mTorr, the coexistence of BFO and Bi2O3 phase at 30-50 mTorr, and the only Bi2O3 phase at 70 mTorr. The crystallinity of BFO films was reduced due to the higher Bi contents and the decrease of surface mobility of atoms at high temperature. The porosity and surface roughness of films increased with the increase of the deposition pressure. The films deposited at high pressure showed low dielectric constant and high leakage current. The dielectric constant of films deposited at various deposition pressures was 84~153 at 1 kHz. The leakage current density of the films deposited at 10~70 mTorr was about 7×10.6~1.5×10.2A/cm2 at 100 kV/cm. The leakage current was found to be closely related to the morphology and composition of the BFO films. BFO films showed poor P-E hysteresis loops due to high leakage current.

The amorphization process and the thermal properties of amorphous TiCuNiAl powder during milling by mechanical alloying were examined by X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). The chemical composition of the samples was examined by an energy dispersive X-ray spectrometry (EDX) facility attached to the scanning electron microscope (SEM). The as-milled powders showed a broad peak (2 = 42.4) with crystalline size of about 5.0 nm in the XRD patterns. The entire milling process could be divided into three different stages: agglomeration (0 < t 3 h), disintegration (3 h < t 20 h), and homogenization (20 h < t 40 h) (t: milling time). In the DSC experiment, the peak temperature T and crystallization temperature T were 466.9 and 444.3, respectively, and the values of T, and T increased with a heating rate (HR). The activation energies of crystallization for the as-milled powder was 291.5 kJ/mol for T.

The early Ordovician graptolites from the upper part (Tumok Member) of the Mungok Formation of the Namaeri and Baeiljae sections at Yeongwol consist of five species belonging to five genera. They are Adelograptus cf. tenellus, Callograptus sp., Dendrograptus suni, Dictyonema sp., and Psigraptus jacksoni. Of these 5 species, Psigraptus is the most excellent index fossil for international correlation with the early Ordovician strata. Adelograptus cf. tenellus from the Mungok Formation of the Namaeri and Baeiljae sections is also recognized with especially short stipe relative to Adelograptus tenellus. Three graptolite zones (such as Adelograptus, Psigraptus, and Dendroid type zones) are correlated with those of Canada, Australia, and China, respectively. The upper part of the Mungok Formation is assigned to the late Tremadocian.

Cupressinocladus sp. found from the upper part of the Jinju Formation of the Shindong Group, Korea is described here based on the newly found leafy shoots. This species is characterized by the branched leafy shoot with decussate scale leaves. The presence of Cupressinocladus in the Jinju Formation indicates that the Early Cretaceous flora-sites in Eastern Eurasia are in a close association with territories of the mixed-type floras. The finding of this species records the first report for the Nakdong flora.

Three species of Pseudolarix including P. japonica, P. sp. A, and P. sp. B, all belonging to Pinaceae, are systematically described from the Middle Miocene Duho Formation of the Yeonil Group based on the detached seminiferous scales. The presence of Pseudolarix in the Yeonil flora indicates that various kinds of Pinaceae did flourish during the Middle Miocene. The occurrence of Pseudolarix is the first record in the Korean Tertiary flora.

The effects of part of plum, alcohol content and addition of t-resveratrol on the formation of ethyl carbamate during the fermentation for wine were investigated at a time interval (45 days) for 6 months. The concentration of the ethyl carbamate in plum wine was determined according to KFDA guideline for ethyl carbamate analysis. In the plum wine with 16% or 30% alcohol content, the concentrations of ethyl carbamate were increased with time of fermentation periods. The maximum concentrations of ethyl carbamate in 16% and 30% plum wines after the fermentation for 6 months were 0.071 μg/g and 0.188 μg/g, respectively. When t-resveratrol was added at the level of 10 μg/g in both 16% and 30% plum wine, the concentrations of ethyl carbamate at 6 months were 0.078 and 0.216 μg/ g, respectively. The addition of t-resveratrol at the level of 300 μg/g in both 16% or 30% plum wine, the concentrations of ethyl carbamate at 6 months were 0.078 and 0.169 μg/g, respectively. The ethyl carbamate in the plum wine was not formed during fermentation for 6 month as using the flesh of plum, but 0.588 μg/g of ethyl carbamate was formed as using plum with plum seed. The addition of 300 μg/g of t-resveratrol actually increased the concentration of the ethyl carbamate by 0.088 μg/g as fermented for 6 months using plum with seed. These results suggest that the flesh of plum should be used to reduce the formation of ethylcarbamate for production of plum wine and that the addition of t-resveratrol during fermentation of plum wine can not reduce the concentration of the ethyl carbamate.

A Cu-Fe-P copper alloy was processed by accumulative roll-bonding (ARB) for ultra grain refinement and high strengthening. Two 1mm thick copper sheets, 30 mm wide and 300 mm long, were first degreased and wire-brushed for sound bonding. The sheets were then stacked on top of each other and roll-bonded by about 50% reduction rolling without lubrication at ambient temperature. The bonded sheet was then cut into two pieces of the same dimensions and the same procedure was repeated for the sheets up to eight cycles. Microstructural evolution of the copper alloy with the number of the ARB cycles was investigated by optical microscopy (OM), transmission electron microscopy(TEM), and electron back scatter diffraction(EBSD). The grain size decreased gradually with the number of ARB cycles, and was reduced to 290 nm after eight cycles. The boundaries above 60% of ultrafine grains formed exhibited high angle boundaries above 15 degrees. In addition, the average misorientation angle of ultrafine grains was 30 degrees.

본 연구에서는 2006년 1월부터 2009년 2월까지 자연 상태에서 만들어진 솟는 고드름(n=107)을 관측, 분석하여 실험실에서 솟는 고드름을 재현할 수 있는 실험 장치를 개발했다. 이 장치를 이용하여 동영상 관측과 실험(531개의 솟는 고드름 생성)을 통해 그 생성과 성장 원리를 연구했다. 용기의 아래 부분이 위쪽 보다 더 차가운 상태에서 용기 바닥과 물 표면에서부터 얼음이 얼기 시작하는데, 표면에서 얼음이 얼지 않는 부분을 숨구멍이라고 하며 이곳으로부터 솟는 고드름이 만들어지기 시작한다. 솟는 고드름이 만들어지기 시작한 후 계속 성장하기 위해서는 용기 하부의 물이 얼음으로 변할 때의 부피 팽창 효과와 숨구멍을 통해 올라오는 과냉각수의 빠른 빙결 효과 등이 관련된다. 실험 장치에서 아이스 트레이 큐브에 증류수를 넣고, -12- -13˚C의 온도를 약 1시간 30분 정도 유지시키면 수면에 살얼음과 숨구멍이 생기기 시작한다. 숨구멍으로부터 생기기 시작한 솟는 고드름은 10-30분 동안 성장하고, 끝이 막히면서 성장을 멈춘다. 솟는 고드름의 형태는 7가지로 분류되며 자연 상태에서는 꼭지형과 기운형이 많았고, 실험실에서는 수직형이 가장 많았다.