본 연구는 신규간호사를 대상으로 환자안전동기, 환자안전관리태도, 환자안전관리행위 정도와 상관관계를 확인하고 환자안전관리행위에 영향을 주는 요인을 알아보고자 실시하였다. 신규간호사 127명 을 대상으로 2020년 9월 11일부터 9월 30일까지 설문조사 하였으며, 수집된 자료는 SPSS 22.0 프로그램을 이용하여 t-test, ANOVA, Scheffe’s test, Person’s correlation coefficients, 다중회귀분석을 하였다. 환자 안전동기는 환자안전관리태도, 환자안전관리행위와 양의 상관관계를 보였으며, 환자안전관리태도는 환자안 전관리행위와 양의 상관관계를 보였다. 환자안전관리행위에 가장 유의한 영향을 준 요인은 환자안전동기, 환자안전관리태도, 환자안전관리 교육경험 이었다. 따라서 신규간호사의 환자안전관리행위 능력을 증진시 키기 위해 환자안전동기, 환자안전관리태도를 포함한 환자안전교육 프로그램의 개발과 적용을 제안한다.

정부(해양수산부) 및 관계기관에서는 안전관리 취약선박의 해양안전 증진을 위한 많은 정책을 시행하고 있으나, 선박의 안전관리에 대한 위험성평가 부재로 각 제도의 효과성에 다소 아쉬움이 확인되었다. 선박의 위험성평가에 대한 국내 선행연구는 대부분 개별적 해양사고 위험성에 대한 단편적 위험성만을 취급하고 있어 포괄적 해양사고 위험성평가를 위한 새로운 방식이 필요하다. 선박의 안전관 리에 대한 포괄적 위험성평가 적용사례로 항만국통제와 노르웨이 해사국의 점검대상 선정방법이 있다. 본 연구에서는 국내 해양사고 및 등록현황의 높은 비중을 차지하고 있는 연근해어선을 대상으로 포괄적 선박안전관리 위험성평가를 위한 지표를 개발하고 적용하였다. 그 결과, 각 선박별 위험성을 계량적 수치로 확인하였고, 개별적 안전관리 취약요소의 순위를 식별하였다.

There has been a steady rate of accident in Coal Thermal Power Plants which have relatively higher chance of mortality. However, neither the systematic view of safety management nor the methodology such as safety factors or system requirements are yet to be studied in detail. Therefore, this study aims to propose a methodology to preemptively deal with safety issues and to secure fact focused responsibility in safety. It consists of two main parts. First, the Safety Measurement Index(SMI) with total 50 factors is proposed by analyzing the key factors that contribute to safety accidents based on failure mode and effect analysis (FMEA) and quality function deployment (QFD). To analyze the safety requirements, index presented by major countries and organizations are discussed. Second, main features of intelligent CCTV are studied to determine their relative importance for the framework of Smart Safety Management System (SSMS). Main features are discussed with four technological steps. Also, QFD was held to analyze to analyze how key technologies deal with Quality Measurement Index(QMI). The research results of this study reveal that scientific approaches could be utilized in integrating CCTV technologies into a smart safety management system in the era of Industry 4.0. Moreover, this reasearch provides an specific approach or methodology for dealing with safety management in Coal Thermal Power Plant.

The purpose of this paper is to understand the key factors for efficient maintenance of rapidly aging facilities. Therefore, the safety inspection/diagnosis reports accumulated in the unstructured data were collected and preprocessed. Then, the analysis was performed using a text mining analysis method. The derived vulnerabilities of tunnel facilities can be used as elements of inspections that take into account the characteristics of individual facilities during regular inspections and daily inspections in the short term. In addition, if detailed specification information and other inspection results(safety, durability, and ease of use) are used for analysis, it provides a stepping stone for supporting preemptive maintenance decision-making in the long term.

본 연구는 스마트 자율운항선박(Maritime Autonomous Surface Ship, MASS) 기술 개발 및 실증을 위한 산학 과제로서 목포해양 대학교와 삼성중공업이 함께 참여한 연구가 안전하게 실시되어 질수 있도록 안전관리 절차서를 개발하였다. 본 연구에서는 국내 및 국 제해사기구(International Maritime Organization, IMO)의 관련 가이드라인 및 해사 관련법 검토를 거쳐 안전관리 절차서를 개발하였다. 안전관리 절차서는 자율운항선박의 관련 해당 당국과 이해관계자들이 시스템 및 기반 시설에서 시험의 안전 및 환경 보호와 관련하여 적절하게 실시하기 위하여 국제해사기구에서 제시한 자율운항선박 시험을 위한 지침(MSC.1/Circ.1604, Annex : Interim guidelines for MASS trials)의 의거하여 개발 하였다. 개발된 안전관리 절차서는 당직체제로 운항 중인 선박에 항해보조기기로 탑재한 자율운항요소기술을 적용한 시스템의 해상 실증 시험을 위하여, 대한민국 연안의 해양환경보호와 항행 안전을 준수하면서, 관련 시스템의 시험이 안전하고 안정적으로 수행할 수 있도록 개발되었다.

The purpose of this study is to investigate the effect of organizational safety and health management activities on safety and health performance by using the results of safety activity level evaluation of public organizations. To this end, a research model was established by using three fields as independent variables among the four areas of the safety activity level evaluation index: safety and health system, safety and health activity plan, and safety and health activity level, and the safety and health activity performance field as a dependent variable. Correlation analysis and regression analysis between major variables were performed. As a result of the correlation analysis, the safety and health activity performance had a significant positive (+) correlation with all of the safety and health system, safety and health activity plan, and safety and health activity level. The safety and health system had a significant positive (+) correlation with the safety and health activity plan and safety and health activity level, and the safety and health activity plan had a significant positive (+) correlation with the safety and health activity level. And as a result of the regression analysis, it was found that the organization’s safety and health system, safety and health activity plan, and safety and health activity level all had a significant positive (+) effect on safety and health activity performance.

In the recent business environment, risks related to product safety problems are increasing. These are arising from various factors such as increasing product and production complexity, supply chain diversification, enhanced PL (product liability) law and strengthening regulations of the government. Accordingly, ISO (international organization for standardization) published standards of PSMS (product safety management system) for suppliers such as ISO 10377 and ISO 10393. Meanwhile, the ISO 9001 QMS (quality management system) was revised in 2015, and it has established itself as an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction. This study aims to suggest an integration framework of QMS and PSMS based on the recent ISO international standards. To this end, firstly, the relationship between QMS and PSMS is studied based on the quality and product safety definitions, PDCA (plan-do-check-act) cycle and risk-based thinking. Secondly, the requirements of ISO 10377 and ISO 9001 are compared and classified as the common and ISO 10377 specific requirements. Finally, integration steps of two systems are suggested and guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies those have already acquired QMS certification to build an international-level product safety management system early.

The ISO 9000 Quality Management System(QMS) standard is an effective tool that can consistently meet the various requirements of stakeholders and promote customer satisfaction management. However, in the recent business environment, not only quality issues but also risks in various other areas are increasing. In particular, risks related to product safety problems which are arised from product convergence, diversification of methods of production and globalization of supply chain pose a great threat to the sustainability of companies. Accordingly, ISO published standards of Product Safety Management System(PSMS) for suppliers such as ISO 10377 and ISO 10393. This study aims to suggest an integration framework of QMS and PSMS based on ISO international standards. To this end, the relationship of QMS and PSMS are analyzed and the requirements of the both systems are integrated based on the Plan-Do-Check-Act(PDCA) cycle and risk-based thinking. In addition, guidelines that can systemize the integrated requirements are presented in the aspect of processes and documentation. This study is expected to be used as a guideline that helps companies that have already acquired QMS certification to build an international level product safety management system early.

본 연구는 간호대학생의 환자안전관리 수행자신감에 미치는 영향요인을 파악하기 위해 실시되었다. 분석결과 환자안전관리 지식 7.0점, 환자안전관리 태도 3.86점, 임상의사결정능력 3.47점, 환자안전관리 수행자신감 4.15점이었다. 환자안전관리 수행자신감은 환자안전관리 지식(r=.216, p<.01)과 환자안전관리 태도(r=.375, p<.01), 임상의사결정능력(r=.467, p<.01)과 양의 상관관계가 있었다. 환자안전관리 수행자신감에 미치는 영향요인은 임상의사결정능력(β=.409, p<.001)과 환자안전관리 태도(β =.198, p=.011) 이었고 설명력은 26.3%이었다.

이 연구의 목적은 연안사고 예방을 위해 연안해역의 효율적 안전관리 방안을 살펴보는 것이다. 최근 연안해역에서 연간 약 800 여건의 크고 작은 연안사고가 지속적으로 발생하고 있으며, 이 중 연평균 129명의 사망(실종)자가 발생하고 있어 대책이 필요하다. 이에 연안해역의 안전관리 담당기관인 해양경찰에서는 2014년 「연안사고예방법」을 제정하고, 지방자치단체, 해양수산부, 소방청 등의 관계 기관과 협력하여 연안해역을 안전관리하고 있다. 그러나 국민의 삶의 질 향상에 따라 여가를 활용하여 수상, 수중, 낚시 등의 연안체험·레저활동이 급증하는 것에 비해, 해경의 인력 및 안전마인드가 부족하고, 국민의 안전의식이 미약하며, 관계기관의 관심 저조 및 협력 미흡, 안전관리시설물 부족 등으로 인하여 연안사고가 지속적으로 발생하고 있는 실정이다. 따라서 본 연구는 최근 연안사고 통계자료 등을 토대로 연안해역의 안전관리 실태와 문제점을 고찰하고, 외국의 연안해역 안전관리 사례를 분석하여 해양경찰의 안전마인드 제고 및 역량 강화, 관계기관 간 협력 강화, 지자체의 역할 제고, 신기술 적용한 안전관리시설물 확충 및 관리 강화, 해양안전문화 확산, 민관협력거버넌스 활성화 등의 연안해역의 효율적 안전관리 개선방안을 제시한다.

마비성 패독(paralytic shellfish poisoning, PSP)에 의한 중독은 와편모조류(Dinoflagellates)가 생성하는 saxitoxin (STX)이 이매패류 등의 먹이활동에 의해 축적되고 이를 사람이 섭취함으로써 발생한다. 최근 분석기술의 발전으로 와편모조류가 STX외에도 gonyautoxin (GTX) group 및 Nsulfo carbamoyl toxins (C toxin) group 등 다양한 유사체들 을 생성하는 것으로 보고되고 있다. 이에 CODEX, EFSA 에서는 STX외 유사체의 안전관리를 위해 STX 및 유사체를 STX group으로 관리하고자 하는 움직임을 보이고 있다 . 국내의 경우도 STX 유사체를 생성하는 조류의 발생이 이미 보고되고 있으며 실제 홍합에서 유사체의 오염사례도 소수 보고되고 있다. 따라서 국제적인 움직임에 발맞추어 국내에서도 STX 및 유사체의 group 관리를 위한 준비가 필요할 것으로 사료된다. 본 연구에서는 STX 및 유사체의 체계적인 모니터링 및 안전관리의 기반을 마련하고자 STX 및 유사체의 이화학적 특성, 생성조류, 국내외 발생현황, 독성 및 상대독성계수, 분석법, 오염현황 및 관리현황에 대한 폭넓은 검토를 수행하고자 하였다.

In general, companies operate systematically in response to financial risks such as exchange rates and liquidity, while they are vulnerable to risks in the manufacturing and sales processes. In particular, logistics refers to the activities for planning, managing and implementing efficient flows from the starting point of goods and products to the point of consumption, The purpose of this study was to develop key risks and key risk management indicators (KRIs) for risks that undermine logistics efficiency so that logistics risks can be effectively prevented and managed. As a result, 40 risk management indicators (KRIs) were developed in a total of six categories in the logistics sector, and the definition, calculation method and early warning grade of each KRI were presented so that companies could prevent risks in advance in logistics activities and contribute to enhancing efficiency of their work.

As the duty to report and investigate major elevator failures has expanded due to the total amendment of the Elevator Safety Management Act in 2018, more important information on major elevator failures that have been partially identified has been collected. As of 2019, the number of elevators in Korea exceeded 700,000, making it the eighth-class elevator powerhouse in the world, but there is a trend of increasing casualties due to accidents and breakdowns. An Seung-gang-gi is a term that encompasses an elevator that moves vertically and an escalator that moves horizontally. It is an important means of transportation for most citizens that are encountered almost every day in daily life, and it is also necessary as a means of transportation that enables the construction of skyscrapers. And it seems that its importance will never diminish in the future. Major elevator failures are the main cause of dispatch when accumulating the number of 119 dispatches, and the frequency of occurrence is high. It's a shame. According to Heinrich's Law, 300 minor signs and danger phenomena precede, 29 minor accidents and 1 major accident. Accidents caused by elevators are increasing every year due to the increase in the number of installations, and the damage is threatening the valuable lives and property of users and workers in related fields due to fatal risks such as death and serious injury. Elevator safety management can achieve its purpose only when it is managed with the usual interests, awareness of safety, and full efforts of the users, workers, and the government concerned. This study was analyzed based on 2019 data notified to the Korea Elevator Safety Agency on major breakdowns improved after the revision of the Elevator Safety Management Act in 2018, and a total of 8,256 data were analyzed using the SPSS 21 version, a statistical analysis tool, to analyze the correlation with technical statistics. Proceeded. Through the analysis, it was possible to obtain preventive safety management data to prevent serious elevator safety accidents from occurring, and to derive meaningful implications that related safety management and maintenance can be effectively operated to prevent serious failures. In addition, through this analysis, we expect the development of related industries and legal and institutional improvement.

본 연구는 우리나라 컨테이너터미널 안전관리제도에 관한 효과적인 개선 방 안을 제시하여 컨테이너터미널 내 작업자가 보다 안전한 환경에서 작업할 수 있는 여건을 조성하여 부산항이 선진 안전항만으로 도약하기 위한 단초를 제공 하는데 그 목적이 있다. 우리나라의 경우, 효과적인 재발방지 대책과 대안 마련 의 기초가 되는 재해 통계 수집에서부터 많은 문제점이 있었으며, 관련법과 제도 등의 미비로 운영회사와 정부기관에서는 체계적인 항만 안전관리 조직과 시스템을 갖추지 못하고 있는 것으로 나타나 이에 대한 개선이 필요한 것으로 보 인다. 컨테이너터미널 내 사고원인의 대부분은 작업자의 안전 불감증으로 인해 발생된다. 하지만 이제는 이러한 안전의식 부족이라는 결론만 내고 그칠 것이 아니라 작업자의 안전의식이 장기적이고 지속적으로 현장에 작용하기 힘든 요 인들에는 어떠한 것이 있는지 살펴보고 이를 제어할 수 있는 강력한 법·제도 등을 보완한 다음, 그 틀 안에서 조직적이고 체계적인 예방 활동들이 이루어져 야 할 필요성이 있다.

Korea’s elevator industry is one of the world’s eighth-largest industrial sectors and the third largest in the world by new installations. This year, the number of elevators has exceeded 700,000, and the number of new installations is 30,000-40,000 every year. However, the news of elevator-related accidents is reported continuously through the media and the accident rate is not decreasing. In particular, among the recent accidents related to elevators, accidents related to elevator workers are increasing, causing social problems. This year, the National Assembly’s Environmental Labor Relations Commission’s National Auditors lost five lives a year and 12 elevator workers were killed in fall and stenosis accidents during the installation, maintenance and replacement of the elevators for about two years since 2018. It took place to adopt the representatives of four domestic elevator companies as witnesses. An elevator worker is a collective term for workers involved in the design, manufacturing, installation, replacement, maintenance, inspection, management, and supervision related to the elevator industry, and the related accidents are called elevator worker accidents. Analysis of elevator-related accidents in the past has shown that the fault of the user accounted for 70% of the total, and the fault of the worker accounted for about 2.5%, and the accident occurred to the user or the user due to carelessness of the worker during the lift-related work. Currently, elevator-related accidents are reported by the Korea Elevator Safety Agency under Article 48 of the Elevator Safety Management Act under the Ministry of Interior and Safety. If deemed necessary for the prevention and prevention of recurrence of an elevator accident, the cause and condition of the elevator accident may be investigated. However, the current draft law is limited only to elevators after installation inspection, and is separated from the Ministry of Employment and Labor’s data on accidents occurring in the manufacturing and installation stages related to the elevator industry. This study analyzes the recent safety accidents of elevator workers and prepares safety measures to prevent them through the risk analysis, and also draws out the problems and improvements of the current elevator worker accident investigation to find the elevator worker accident rate that is on the increase trend.