With the 14 m radio telescope at DRAO and the 4 m at Nagoya University, we have made detailed maps of 12 C O and 13 C O emissions from two Barnard objects B133 and B134 in the J = 1 → O rotational transition lines. Usual LTE analyses of the CO observations led us to determine the distribution of column densities over an entire area encompassing both globules. Total gas masses estimated from the column density map are 90 M ⊙ and 20 M ⊙ for B133 and B134, respectively. The radial velocity of B133 is red shifted with respect to B134 by 0.8 k m s − 1 , which is too lagre to bind the two clouds as a binary system. We have shown that the usual stability analysis based on the simplified version of virial theorem with the second time-derivative of the moment of inertia term ¨ I being ignored could mislead us in determining whether a given cloud eventually collapses or not. The lull version of the scalar virial theorem with the ¨ I term is shown to be useful in following up the time-dependent variations of the cloud size R and its streaming velocity ˙ R as functions of time. Results of our stability analysis suggest that B133 will eventually collapse in ( 2 ∼ 4 ) × 10 6 years.

A slope stability analysis has been done on Daesungri area by a computer program using limit equilibrium (Sarma method,1979). For this study, the authors modified the iteration technique and menu system of the algorithm which has been suggested by Hoek(1986). Sarma method is known as a suitable tool for evaluation of slope failure taking into account the kinematics of sliding blocks, and can be used for analysis of slopes of complex profiles such as circular, non-circular, planar sliding surfaces or any combination of these. The insertion of iteration technique and hydrodynamics in this method is very efficient, and gives an accurate estimate of static factor of safety. The analysis allows to specify different shear strength for each slice side and base, and therefore the submergence of any part of slopes is automatically analysed by taking the coordinates of phreatic surface. This program in combination with those stereographic technique developed by Appfied Geology Division of KIER(Korea Institute of Energy and Resources) in 1988 can be expected to give a useful result into evaluation of slope stability

A Stability to the dispersion solvent, which is acetonitrile, dichloromethane, benzene, chloroform and acetonitrile-benzene(1:1,v/v) of N-docosyl pyridinium)-TCNQ(1:2)complex was investigated by U.V Spectrophotometer and was confirmed stabilized on acetonitrile, the dichloromethane and acetonitrile-benzene (1:1,v/v) for seven hours. Using CdCl2buffer solution as subphase for LB films deposition, it was achived successively to fabricate the Y-type LB films of (N-docosyl pyridinium)-TCNQ(1:2)complex. For the sake of verifying the deposition of LB films, U.V is measured by variation of nominal layer number.

Two perforated plates(a square plate and a rectangular plate having an as야ct ratlO 1.57(L,=11, L,= 7)) are taken as analysis examples. Each of these plates is given some changes in the boundary ∞nditions. The size of cutouts as well as their locations are also changed in order to examine the variation of two eigenvalues corresponding to the fundamental mode. The relationship between two eigenvalues is estab!ished by changing the magnitude of edge thrust

The oxidative stability of palm oil with moisture addition during heationg was investigated and the antioxidant effects of tocopherol, citric acid and sodium polyphosphate were evaluated. The addition of natural tocopherol up to 200 ppm level did not improve the oxidative stability of palm oil with moisture (1m1 H2O additive to 200g of oil at 180℃). The maximum antioxidant effect was observed at the Concentration of 400 ppm. Addition of citirc acid did not influence the effective concentration of tocopherol. Whereas addition of sodium polyphosphate and citric acid increased the antioxidant effect of tocopherol. The maximum synergistice effect was observed at the concentrations of 50 ppm citric acid and 50 ppm of sodium polyphosphate. Addition of 50 ppm citric acid and 50 ppm sodium polyphosphate to 100 ppm of tocopherol exceeded the antioxidant effect of 400 ppm tocopherol alone.

냉동발효(醱酵)빵 제조에 사용되는 경질(硬質) 밀가루의 이화학적(理化學的) 성질과 straight no-time method로 조제한 반죽의 동결안정성(凍結安定性)을 검토(檢討)하였다. 밀가루는 수분이 14.0%, 회분(灰分)이 0.48% 정도였고 단백질이 13.15%, 건조 gluten이 13.43%였다. Farinograph성적은 반죽의 development time이 5.5분, 흡수율(吸水率) 62%였고, amylograph성적상의 최고점도(最高粘度)는 500BU정도였다. Extensigraph의 특성중(特性中) 신장저항성(伸張抵抗性)은 시간이 경과할수록 증가하였고, 신장성(伸張性)은 감소(減少)하였다. 이상(以上)의 이화학(理化學)이 성질(性質)로 미루어 공시(供試)밀가루는 제(製)빵에 아주 적합하였다. 동결저장기간과 발효시간이 발효력(醱酵力)에 미치는 영향을 고려할 때, 반죽온도를 로 조정하는 것이 반죽의 냉동장해(冷凍障害)를 억제하고 냉동안정성(冷凍安定性)을 유지하는데 효과적(效果的)이었다.

The storage stability of Instant Ramyon by industrially prepared with palm, beef tallow and blended rapeseed oils for frying oil was studied. The products was stored under fluorescent light at 60℃ with illumination of 9,000 lux. Changes of peroxide value, total carbonyl value, and absorbance at 232 nm of lipids extracted from Ramyon were investigated during storage. The storage stability of Ramyon prepared with oils containing TBHQ had better than that prepared with a mixture of BHA and BHT. The Ramyon prepared with 4 part of rapeseed oil to 6 part of tallow containing 0.02% BHA/BHT showed higher storage stability than that prepared with palm oil alone but showed lower stability than that prepared with tallow alone both under the same condition of antioxidant treatment.

A preliminary investigation was performed to evaluate the possibility of partially replacing palm oil and beef tallow by rapeseed oil for frying oils of instant Ramyon manufacturing. The AOM stability of rapeseed oil was inferior than of palm oil, but was comparable to that of beef tallow. When rapeseed oil was blended with palm oil or beef tallow, the AOM stability of the blended oil was improved. As far as AOM stability is concerned, best results were obtained with a blending ratio of 3 part of rapeseed oil to 7 part of palm oil and a ratio of 4 part of rapeseed oil to 6 part of beef tallow. These blended rapesee oils was retarded the formation of conjugated dienes and polymers during heating. The antioxidative effects on the stabilities of AOM and thermal in blended rapeseed oils showed that TBHQ was superior to tocopherols and a mixture of BHA and BHT was inferior.

No difference was observed on autoxidative stability of triacylglycerols before and after randomyl interesterification. It indicate that randomization of the glyceride composition has no significant effect on the autoxidative stability. On the other hand, the autoxidation of randomyl interesterified vegetable oil was accelerated, caused mainly by decrease of tocopherols during the series of interesterification procedures.

Radial distribution of internal density has been determined for thirteen subclouds in the three giant molecular cloud complexes accompanying Mon OB1, Mon OB2 and CMa OB1 associations, We modeled their radial density structures with the density distribution of isothermal gas spheres. Most of the subclouds, nine out of the thirteen, are well described by isothermal spheres of single component; while the rest four require an additional component. Total mass and potential energy of each subcloud are also derived from the radial density structure; thermal energy and internal velocity dispersion required for sustaining the density structure are deduced from the isothermal gas model. Our derived masses of the clouds are comparable to the values determined by Blitz (1978) under LTE assumption. This agreement suggests that the correction factor for non-LTE effect on mass-estimate is not far from unity. The ratio of the gravitational potential energy to the kinetic energy of thermal motion is as large as 250; hence the thermal motion alone cannot support these clouds against the gravity. Being supported by turbulence motion with velocities of six to seven times the thermal velocity, the clouds of one-component type seem to be in equilibrium with the gravity; while the clouds of two-component type are likely to be in the stage of gravitational collapse.

The study was carried out to investigate interrelationships among the acid, peroxide, iodine, thiobarbituric acid values, and changes of fatty acid compositions of some vegetable oils added to soybean milk. A storage temperature of 100℃ was used for the oxidation of the oils, and to determine of variation of the chemical properties and changes of the fatty acid composition, all the samples were carried out in every 8 hours for 40 hours. The changes in fatty acid compositions of the vegetable oils were measured by high performance liquid chromatography. The results obtained were as follow; 1. The acid values of the fresh soybean, corn, and palm oils added to the soybean milk were 0.05, 0.12, and 0.06, whereas those of the oils stored for 40 hours were 0.08, 0.18, and 0.09, respectively. 2. The peroxide values of the fresh soybean, corn, and palm oils added to the soybean milk were 0.3, 1.0, and 0.3, whereas those of the oils stored for 40 hours were 1.1, 1.1, and 0.9, respectively. 3. The iodine values of the fresh soybean, corn, and palm oils added to the soybean milk were 132.7, 124.1, and 57.0, whereas those of the oils stored for 40 hours were 127.3 108.3, and 52.0, respectively. 4. The thiobarbituric acid values of fresh soybean, corn, and palm oils added to the soybean milk were 0.18, 0.05, and 0.02, whereas those of the oils stored for 40 hours were 0.25, 0.19, and 0.07, respectively. 5. The percent content of the major fatty acids of the soybean, corn, and palm oils freshly added to the soybean milk were 2.3%,2.5%,and 25.2%for palmitic acid, 3.2%,3.2%,and 4.8%for stearic acid, 39.7%, 40.7%, and 59.3% for oleic acid, 49.9%, 53.0%, and 10.5% for linoleic acid, and 4.7%, 0.4%, and 0.7% for linolenic acid, respectively. Those of the oils stored for 40 hours were 2.9%, 4,5%, and 36.7% for palmitic acid, 8.5%, 6.8%, and 7.0% for stearic acid, 37.8%, 38.8%, and 49.2% for oleic acid, 46.2%, 49.5%, and 5.8% for linoleic acid, and 4.2%, 0.1%, and 0.1% for linolenic acid, respectively. The fatty acid compositions changed significantly: the amounts of the unsaturated fatty acid decreased considerably. The rsults of the present study demonstrated greater stability of the palm oil as compared with the stability of soybean oil and corn oil added to the soybean milk.

낙동강하류(洛東江下流)의 순(純)갈대초지(草地)에 있어서 현존량(現存量)의 계절적(季節的) 변화(變化), 최대현존량(最大現存量)의 년별변화(年別變化), 물질생산구조(物質生産構造)의 계절변화(季節變化) 및 년순생산성(年純生産性)을 평가(評價)한 결과(結果)는 다음과 같다. 1. 순갈대초지(草地)의 최대현존량(最大現存量)은 9월(月) 중순(中旬)에 나타났으며 평균(平均) 최대일물질생산성(最大日物質生産成)은 6월(月)과 7월(月)사이로 32.7g/m2/d

Butachlor를 유제(乳劑)와 입제(粒劑)로 제제화(製劑化)할 때 화학적(化學的) 안정성(安定性)과 약효(藥效)에 영향(影響)을 미치는 요인(要因) 중(中) 수분(水分), pH, 담체(擔體), 유화제(乳化劑) 및 유기용제등(有機溶劑等)으로 제제조성(製劑組成)을 달리 했을 때와 자외선조사시(紫外線照射時)의 주성분(主成分) 경시변화(經時變化)에 미치는 영향(影響)을 조사(調査)한 결과(結果)는 다음과 같았다. 제제형태(製劑形態)에 따른 경시변화율(經時變化率)은 암실보관시(暗室保管時)에는 제형(製形)에 상관(相關)없이 16시간(時間) 후(後)까지 안정(安定)하였으나 자외선조사시(紫外線照射時)에는 주성분(主成分) 분해율(分解率)이 유제(乳劑) > sand 피복입제(被覆粒劑) > zeolite 흡착입제(吸着粒劑)의 순(順)으로 나타났다. 물과 pH를 조절(調節)한 후(後)의 유탁액상태(乳濁液狀態)에서는 주성분(主成分)의 분해(分解)가 거의 일어나지 않았다. 유기용제(有機溶劑)로 유제(乳劑)를 조제(調劑)하여 에서 보관(保管)시킨 후(後)의 주성분(主成分) 분해율(分解率)은 극성유기용제(極性有機溶劑)인 benzene, xylene이 비극성유기용제(非極性有機溶劑)인 iso-propyl alcohol 보다 높은 것으로 나타났다. 유화제(乳化劑)의 종류(種類)에 따른 주성분(主成分) 분해율(分解率)은 Tween 60이 Hy-620C 및 Newkalgen-MC에 비(比)해 높게 나타났다.

응력집중부에 존재하는 균열에 대해서 J 평가식은 그 주위의 응력집중부의 국부변형과의 관계에 대해서 인장 및 압축이 있는 두곳에서 BEM 해석과 광탄성 실험한 결과와 COD 및 J치의 무차원량 J 하(E) /Σ 하(y) 상(2) a와 그 경우의 평균변형 및 항복변형의 비(e/e 하(y) )와의 관계는 균열의 길이에 의하지 않고 응력집중부의 형태에 거의 지배적으로 결정되는 일의적 대응관계가 있다. 2. 무한연속부 내부의 어떤 결함에 의한 평가식으로 부터 구한 값을 불연속 구조물내의 응력집중부에 존재하는 결함에 비하여 비교 정리하면, J 하(E) /Σ 하(y) 상(2) a=3.345(e/e 하(y) ) 상(2) 의 구간은 e/e 하(y) ≤1이고, J 하(E) /Σ 하(y) 상(2) a=3.345(e/e 하(y) )의 구간은 e/e 하(y) ≥1로서 이식들은 결함부 J평가식으로 사용할 수 있다. 3. 경계요소법에 의한 J식의 값과의 사이에는 가공경화율은 E/100을 사용하므로 이론과 실험결과가 거의 일치함을 보이고 상기 J식은 불연속평판 구조물이 결함을 가질 때 응력설계곡선의 자료가 될 수 있다.

경계요소법에 의하여 U자형 홈(groove)을 가진 평판이 측면 분포하중을 받을 때 끝부에 위치할 원형 Hole의 최적 위치의 해석을 행하고 동일한 모델(model)에 대하여 실험결과를 비교하여 다음과 같은 결론을 얻게 되었다. 1. 원형 Hole이 U자형 홈(groove)에 가까이 접근하게 됨에 따라 초기의 원형 Hole은 c.-c.선에 수직방향이 그 장축이 되는 타원형으로 변화됨을 알 수 있다. 2. 원형 Hole이 U-groove에 접근함에 따라 Hole 과 Groove 사이의 Neck부는 그 횡단면응력이 인장 및 압축이 동시에 존재하다가 점점 전체가 인장역이 됨을 알 수 있다. 3. 원형 Hole이 Groove에 접근함에 따라 판재경계와 Hole 사이의 목(neck)부분은 계속적인 압축상태를 유지한다. 4. U-groove쪽의 Neck area의 응력분포는 그 최대응력치가 Hole로 접근함에 따라 가속적으로 증가하고 Hole의 찌그러짐(distortion)의 방지를 위한 Hole의 최적중심의 위치는 Neck부의 Hole 측면의 압축응력치가 0이 되지 않는 범위가 한계임을 알 수 있다.

중층트를 어구(漁具)의 소해심도(掃海深度)를 일정(一定)한 적정어획속도(適正漁獲速度)에서 기동성(機動性)있게 변화(變化)시키기 위하여 기초적인 모형어구(模型漁具)의 수조실험(水槽實驗)과 특별(特別)히 고안한 깊이바꿈틀을 이용(利用)한 이차(二次)에 걸친 해상시험(海上試驗)을 통(通)하여 연구한 결과를 요약(要約)하면 다음과 같다. 1. 중층(中層)트롤의 그물어구의 깊이 y는 끌줄의 길이 L과 단위(單位) 길이의 끌줄, 깊이바꿈틀 및 그물의 각(各) 수중중량(水中重量) $W_r,\;W_o,\;W_n$과 각(各) 항력(抗力) $R_r,\;R_o,\;R_n$ 사이의 관계(關係)는 차원해석법(次元解析法)에 의하면 다음과 같다. $$y=kLf(\frac{W_r}{R_r},\;\frac{W_o}{R_o},\;\frac{W_n}{R_n})$$ 단(但), k는 상수(常數)이고 f는 함수이다. 2. 단위 길이당(當)의 수중중량(水中重量) $W_r$, 길이 L인 끌줄 끝에 항력(抗力) $D_n$, 수중중량(水中重量) $W_n$d인 수중저항분를 매달고 끌줄의 다른 한 끝을 수면(水面)에서 예인(曳引)할 때,. 끌줄의 형상(形狀)을 현수곡선이라고 보면, 수중저항분의 깊이 y는 다음과 같다. $$y=\frac{1}{W_r}\{\sqrt{{D_n^2}+{(W_n+W_rL)^2}}-\sqrt{{D_n^2+W_n}^2\}$$ 3. 중층(中層)트롤의 그물어구(漁具)깊이의 변화(變化) ${\Delta}y$는 예강(曳綱)의 길이 L을 바꾸거나 추(錘) ${\Delta}W_n$를 부가(附加)하면 다음과 같다. $${\Delta}y{\approx}\frac{W_n+W_{r}L}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}{\Delta}L$$ $${\Delta}y{\approx}\frac{1}{W_r}\{\frac{W_n+W_rL}{\sqrt{D_n^2+(W_n+W_{r}L)^2}}-{\frac{W_n}{\sqrt{D_n^2+W_n^2}}\}{\Delta}W_n$$ 단(但), $D_n$은 그물어구의 항력(抗力)이다. 4. 끌줄 상(上)의 중간점(中間点)에 추(錘) $W_s$를 부가(附加)할 때 중층(中層)트롤 그물어구의 깊이바꿈 ${\Delta}y$는 $${\Delta}y=\frac{1}{W_r}\{(T_{ur}'-T_{ur})-T_u'-T_u)\}$$ 단(但) $$T_{ur}^l=\sqrt{T_u^2+(W_s+W_{r}L)^2+2T_u(W_s+W_{r}L)sin{\theta}_u$$ $$T_{ur}=\sqrt{T_u^2+(W_{r}L)^2+2T_uW_{r}L\;sin{\theta}_u$$ $$T_{u}'=\sqrt{T_u^2+W_s^2+2T_uW_{s}\;sin{\theta}_u$$ $T_u$ 추(錘)를 부가(附加)하지 않았을 때 끌줄 상(上)의 중간점(中間点)에 있어서의 예인어선(曳引漁船) 쪽을 향하는 장력(張力)이고, ${\theta}_u$는 장력(張力) $T_u$와 수평방향(水平方向)과 이루는 각도(角度)이다. 5. 어떠한 형태(形態)의 저예강용(底曳綱用) 전개판(展開板)도 성능(性能)에 있서어 차이는 있으나 전중량(全重量)을 가볍게 하고 저변(底邊)에 무게를 달아 안정(安定)시키면 중층예강용(中層曳綱用)으로 사용(使用)할 수 있다는 것이 모형(模型) 실험(實驗)결과 밝혀졌다. 6. 모형(模型) 그물(Fig.6)의 수조실험(水槽實驗)에서는 예강속도(曳綱速度) v m/sec, 강고(綱高) H cm 및 수유저항(水流抵抗) R kg 사이에는 다음과 같은 간단(簡單)한 관계식(關係式)이 성립(成立)한다. $$H=8+\frac{10}{0.4+v}$$$R=3+9v^2$$ 7. 특별(特別)히 고안한 십자(十字)날개형(型) 깊이바꿈틀과 H날개형(型) 깊이 바꿈틀을 비교(比較)한 결과(結果) 전자(前者)보다 안정성(安定性)이 우월하였다. 8. 그물어구(漁具)의 유수저항(流水抵抗)이 매우 크며 또 거의가 항력(抗力)으로 볼 수 있으므로 깊이바꿈틀의 종류에 관계없이 그물어구의 소해심도(掃海深度)는 대단히 안정(安定)된 상태를 유지하였다. 9. H날개형(型) 깊이바꿈틀의 수평(水平)날개 면적율 $1.2{\times}2.4m^2$로 하였을 때 유수저항(流水抵抗) 2 ton의 그물 어구를 2.3kts로 예인(曳引)하면서 영각(迎角)을 $0^{\circ}{\sim}30^{\circ}$로 변화(變化)시킨 결과(結果), 끌줄의 길이에 관계없이 약(約) 20m의 깊이바꿈을 얻을 수 있었다.

In this study, the effect on the stability of Aerobic Granular Sludge (AGS) caused by an AGS separator was investigated. The AGS separator was a hydrocyclone. The main factors of the AGS separator were filter pore size (0.125∼0.600 mm), conical-to-cylindrical ratio (1.5∼3.0), and operating time (1∼20 min). The AGS/mixed liquor suspended solid (MLSS) ratio gradually increased to 0.500 mm (AGS/MLSS: 84.3±3.0%). AGS was best separated at the conical-to-cylindrical ratio of 2.5 (AGS/MLSS: 84.7±3.3%). As the operating time increased, the AGS separation performance also tended to increase. The shortest AGS separator run time, but the highest AGS separation performance was 10 min (87.0±2.5%). AGS stability was evaluated by operating the selected AGS separator and sequencing batch reactor. The average removal efficiencies of TOC, TCODCr, SS, TN, and TP were 95.7%, 96.9%, 93.0%, 89.0%, and 96.2%, respectively, which met the effluent standards in Korea. In addition, the AGS/MLSS ratio tended to remain constant, and the sludge volume index demonstrated a tendency to decrease from 140 mL/g to 70 mL/g. During the operation, the particles of AGS in optical microscope observations gradually increased.

Stability and sustainability of the biggest banks in any country are extremely important. When big banks become unstable and vulnerable, they typically stop lending. The resulting credit squeeze pushes the economy into recession or a slow growth path. The present study examines the financial stability and sustainability of the 30 large banks operating in the six Gulf Cooperation Council countries. These banks represent 70% of the GCC banking market. Monte Carlo simulation was attempted assuming that key drivers can vary randomly by twenty percent on either side of the current values. The conclusions are drawn based on 300 simulation trails of the five-year forecast balance and income statement of each bank. Year 2020 is not favorable for the GCC countries because of the COVID-19 pandemic and low oil prices, though the future years may be better. The study identifies several banks, which may become financially unsustainable because the simulations indicate the possibility of negative profitability, unacceptably low capital ratios and potential for heavy credit losses during periods of economic turbulence, which is the current situation due to the COVID-19 pandemic. Through simulation the paper is able to throw light on which factors lead to bank instability and weakness.

This study examines the relationship between gender diversity (women on the board and women on the audit committee) and a firm’s financial stability. The ordinary least square analysis was used to determine the relationship. To measure the financial stability of Malaysian suspect firms, i.e., firms with the lowest positive earnings, the Altman (1993) Z-Score measurement was utilized. The results indicate that women on the board are significantly and negatively associated with the firm’s financial stability. That is, they are related to low financial stability, which contradicts the agency and resource dependence theories. Regarding women directors on the audit committee, there is no significant relationship with financial stability, meaning that they cannot protect the company against financial distress. These results are robust and do not change when using different measurements of gender diversity, one-year lag of independent variables, and other methods of analysis, namely random effect panel data. This study is the first to alert policymakers, stakeholders, researchers, and society in general to the need to re-evaluate and strengthen the role of women directors in improving firms’ financial stability, particularly in emerging economies like Malaysia.