검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 169

        61.
        2013.11 구독 인증기관 무료, 개인회원 유료
        이 논문은 공정변화를 보다 잘 감지할 수 있는 관리도의 개발동향에 주안점을 두고 있으며, 경제적 접근법으로 관리모수를 설정하여 공정관리 메카니즘을 사용하는데 있어서 최소의 비용을 가지도록 하여 품질 향상 비용을 절감시킬 수 있는 설계 접근방법을 조사 연구했다. 또한 CUSUM 관리도를 기존의 다양한 관리도와 결합하여 개발된 새로운 관리도를 비교했다. 비교된 관리도의 경제적 모형설계를 통하여 공정 품질에서의 경제적인 영향의 최적화를 위한 관리모수를 제시했다. 이는 공정평균의 이동을 감지하기 위한 결합 관리도를 개발하는 경제적설계 절차를 제시했다.
        4,600원
        62.
        2013.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 환경오염 문제에 대한 심각성이 대두되며 전 세계적으로 환경부하 저감을 위해 다양한 노력을 쏟고 있다. 특히 환경 저해 산업의 하나인 건설분야에서는 CO2배출량과 에너지 소비량을 줄이기 위해 활발한 연구를 진행해 왔다. 그러나 건설분야의 기존 연구들은 대부분 CO2배출량이 가장 큰 사용 및 유지관리 단계에만 집중하고 있으며, 설계단계에 대한 연구는 2D의 철근콘크리트 부재 및 구조물에 대해서만 실행되었을 정도로 초기단계이다. 사실, LCA적 관점에서 친환경적 건설산업을 이루기 위해서는 건물의 초기설계 단계에서부터 CO2배출량을 저감시키기 위한 방향으로 설계를 유도할 수 있어야 하며, 구조 엔지니어로서 환경성을 고려한 설계안을 제시할 수 있어야 한다. 그러므로 본 연구에서는 매입형 합성기둥(SRC)을 대상으로 CO2최적화 기법을 제시하였으며, 이를 통해 얻은 여러 설계단면을 이용하여 SRC기둥의 CO2배출량에 영향을 미치는 3가지 요소(① 강재 크기, ② 콘크리트 압축강도, ③ 작용 하중 크기)에 대한 영향관계를 분석하였다.
        4,000원
        63.
        2013.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study is concerned about the optimal design of the main frame in a moper. Mopper is widely used for cleaning in the fields such as airport, subway, train station, large shopping mall, department store, hospital, government buildings, school, industrial building floor, etc. Especially, main frame in mopper are stressed by high, mostly loads. Nevertheless, design of main frame is dependent on experience, and it will cause reliability reduction and cost increase. This research purpose is to propose and verify a method to achieve higher product quality, lower costs, and far less physical testing. In this study, design parameters used for optimization are each thickness of 4 square pipes and 1 plate in the main frame. The result after optimization showed that the weight of main frame reduced to maximum 6.5% when compared with the initial design in main frame.
        4,000원
        64.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The SMC(Sheet molding compound) process is widely used in the automotive industry to produce parts that are large, thin, lightweight, strong and stiff. Compression molded parts are formed by squeezing a glass fiber reinforced UP(Unsaturated Polyester) sheet, known as sheet mold compound(SMC), between two heated cavity surfaces. This paper has performed flow analysis to predict optimization process of low density SMC. After five types of design variables and six types of response variables were defined, DOE(Design of Experiment) and RSM (Response Surface Method) were applied in order to measure sensitivity of design variables and realize optimization through regression model. After design optimization, the total warpage of the SMC is reduced by about 12% compared to the initial design of SMC and cure time, cure temperature, clamping force and flow pressure are decreased by 0.6∼27% in comparison with the initial design. By doing this, the production costs could be diminished.
        4,000원
        65.
        2013.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The object of this study is concerned about the optimal design of the supporting frame in a twist screen. Twist screen is widely used for grading and screening materials in the fields such as coal-selecting, mining-selecting, building materials, electrical power and chemical industry, etc. It is composed of base, supporting frame, vibrator, screen, spring, trough, clamp and etc. Especially, supporting frame in twist screen are stressed by high load, mostly it is shock-type loads. Nevertheless, design of base is dependent on experience, and it will cause reliability reduction and cost increase. The supporting plate is composed by the upper plate, the bracket and etc. This research purpose is to propose and verify a method to achieve higher product quality, lower costs, and far less physical testing. In this study, design parameters used for optimization are the upper plate thickness(8㎜, 10㎜, 12㎜) and the bracket thickness(8㎜, 10㎜, 12㎜) in the supporting frame. The result showed that base weight reduced to maximum 25.8% when compared with the current twist screen.
        4,000원
        66.
        2012.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Geometric configurations such as hull shape, wall thickness, stiffener layout, and type of construction materials are the key factors influencing the structural performance of pressure hulls. Traditional theoretical approach provides quick and acceptable solutions for the design of pressure hulls within specific geometric configuration and material. In this paper, alternative approaches that can be used to obtain optimal geometric shape, wall thickness, construction material configuration and stiffener layout of a pressure hull are presented. CAE(Computer Aided Engineering) based design optimization tools are utilized in order to obtain the required structural responses and optimal design parameters. Optimal elliptical meridional profile is determined for a cylindrical pressure hull design using metamodel-based optimization technique implemented in a fully-integrated parametric modeler-CAE platform in ANSYS. While the optimal composite laminate layup and the design of ring stiffener for a thin-walled pressure hull are obtained using gradient-based optimization method in OptiStruct. It is noted that the proposed alternative approaches are potentially effective for pressure hull design.
        4,000원
        67.
        2012.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study is concerned about the optimal design of the base in a vibrating screen. Vibrating screen is widely used for grading and screening materials in the fields such as coal-selecting, mining-selecting, building materials, electrical power and chemical industry, etc. It is composed of base, frame, vibrator, screen, spring, trough, clamp and etc. Especially, base in vibrating screen are stressed by high, mostly shock-type loads. Nevertheless, design of base is dependent on experience, and it will cause reliability reduction and cost increase. The base is composed by the lower plate, the middle plate and the upper plate. This research purpose is to propose and verify a method to achieve higher product quality, lower costs, and far less physical testing. In this study, design parameters used for optimization are the lower plate thickness(7mm, 9mm, 11mm), the middle plate thickness(4mm, 4.5mm, 5mm) and the upper plate thickness(7mm, 9mm, 11mm) in the base. The result showed that base weight reduced to maximum 19.1% when compared with the current vibrating screen.
        4,000원
        68.
        2012.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Belleville springs can sustain relatively large loads with small deflections and belleville spring washers are especially suited for high loads in small places. Belleville springs are used singly or in stacks to achieve desired load such as power transmission components. The aim of this paper is to design for the belleville spring diameter and thickness to minimize volume of the system. The design is carried out using finding solution in a commercial spreadsheet application software, Microsoft Excel 2007. The numerical results are obtained where the displacement, stress and load in the spring are treated as constraints function.
        4,000원
        69.
        2012.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        새만금 지역의 담수수자원의 활용과 고부가가치 창출을 위해 새만금 담수호를 활용한 요구수질별 용수공급을 위한 최적의 수처리 시스템을 선정하고 이에 대한 비용분석을 통해 요구수질별 담수수자원의 활용 방안을 제시하고자 하였다. 다양한 수처리 기법들의 종류, 주요 특성 및 오염인자 제거효율, 공법의 장단점 등의 비교분석을 통해 수질오염인자별 유리한 처리공법을 제시하였으며, 최적의 수처리시스템을 도출하여 새만금 지역 내 요구수질별 수처리 비용을 분석하였다. 연구결과를 통해 SS(Suspended Solid), BOD(Biochemical Oxygen Demand), 탁도 제거를 위해 FDA(Filter Disinfection Adsorption)여과기, 대장균 제거를 위한 UV(Ultra-Violet)처리공정, T-P(Total Phosphorus), T-N(Total Nitrogen) 제거를 위한 FNR(Ferrous Nutrient Removal)공법, 그리고 저농도 염처리 공정을 위해 전기투석법이 유리한 공법으로 조사되어 최적의 수처리시스템의 요소기술로 각각 선정되었다. 각 요구수질별 선정된 수처리공정에 따른 비용분석과 적용사례를 제시하여 새만금지역 담수 활용도를 높이고 부족한 상수원 해결의 대안으로 적용할 수 있을 것으로 사료된다.
        4,000원
        70.
        2011.08 구독 인증기관 무료, 개인회원 유료
        To maintain thermal performance of the Ondol system, elements of the system must be optimally designed so that the thermal performance and hot water flow can be efficiently transmitted from the Ondol system in apartment units. The purpose of this study is to propose the optimal design data and applicable design process of the Ondol system. The design process should incorporate the energy-efficient system as well as a comfortable indoor thermal environment in the early design stage.
        4,000원
        71.
        2011.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        구조물에 대한 진동제어 기술은 지금까지 일반 라멘구조물을 대상으로 하여 많은 연구가 이루어져 왔다. 공간구조물은 일반 라멘구조물과는 다른 동적응답특성을 가지고 있기 때문에 일반 라멘구조물을 대상을 개발된 진동제어 기술을 공간구조물에 적용시키기에는 불확실한 요소가 존재하게 된다. 본 논문은 대공간구조물 중에서 자중이 비교적 커서 지진응답이 크게 나타나는 트러스 형태의 아치 구조물을 대상으로 하여 수동형 TMD 설치 위치 및 질량비에 따른 제어성능을 분석하였다. 예제 아치구조물의 TMD 설치 위치에 따른 진동응답 분석결과, 모드벡터가 가장 큰 위지에 TMD를 설치하는 것이 가장 제어성능이 우수한 것으로 나타났다. 또한 TMD 의 질량비 변화에 따른 진동응답 분석결과, 질량비가 약 2%인 경우에 가장 효율적인 것을 확인 할 수 있었다.
        4,000원
        72.
        2011.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        불확실성을 가지는 하중의 변동성을 고려한 구조제어시스템의 최적설계방법에 관하여 연구하였다. 일반적인 제어시스템의 설계 문제가 구조물과 제어시스템간의 상호작용 고려하여 구조-제어 시스템을 최적화이나, 이 연구에서는 하중-구조물-제어 시스템간의 상호작용에 대한 최적설계방법에 관하여 다루었다. 구조물의 응답을 최대화하는 하중과, 이를 최소화하는 구조제어시스템을 동시에 구하는 최대-최소문제(Min-max Problem)를 정식화하고, 최적설계변수를 효율적으로 찾는 방법으로 병렬진화 알고리즘을 이용하여 불확실성이 존재하는 선형구조제어시스템의 최적설계방법을 제시하였다. 지진하중을 받는 구조물의 제진시스템 설계 예 및 수치해석을 통하여 연구한 방법의 타당성을 검증하였다.
        4,000원
        73.
        2011.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        해양에너지는 아직 개발되지 않은 가장 유망한 재생 및 청정에너지 자원 중 하나이다. 특히 우리나라는 세계적으로 보기 드문 조류발전의 적지이며, 이를 이용하기 위해서는 각 해역에 적합한 조류에너지 변환 장치의 개발이 매우 필요하다. 따라서 본 연구에서는 조류발전 방식 중 수평축 로터 블레이드의 최적형상 설계 및 성능평가를 목적으로 날개 끝 손실 모델을 포함하는 날개요소 운동량이론을 적용한 조류터빈 설계기법을 제안하고, 100 kW급 로터 블레이드를 설계하였다. 또한 블레이드 국부위치에서 주속비에 따른 Prandtl의 날개 끝 손실 변화를 비교하였으며, 정격 날개 끝 속도비에서 NACA63812를 사용하여 설계된 로터 블레이드의 동력계수는 0.49로 우수한 성능을 나타내었다.
        4,000원
        74.
        2010.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Reliability has been considered as a one of the major design measures in various industrial and military systems. The main objective is to suggest a mathematical programming model and a hybrid parallel genetic algorithm(HPGA) for the problem that determin
        4,000원
        75.
        2010.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to design the optimal escape vent for the coon strip shrimp pot, the tank experiments were conducted with the model pot of five different slit height and slit width, respectively. The optimal height and width of escape vent were determined to 20mm and 40mm by tank experiments, respectively. These were determined by the 50% selection carapace length which was denoted to 25mm in selectivity curve. The escape experiments were conducted to determine a number of escape vent with the original shrimp pot to be set the designed escape vent from 2 vents to 10 vents increasing at intervals of 2 vents in tank. The optimal number of escape vents denoted 8 vents. Therefore, to apply the escape vent in commercial shrimp pot will be efficient to reduce small size shrimps to catch.
        4,200원
        76.
        2010.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 비선형 지진격리교량의 최적 설계 방법을 제시하였다. 최적설계를 위한 목적함수로는 교각과 지진격리장치의 파괴확률을 고려하였으며, 상충하는 두 목적함수를 동시에 최적화하는 다수의 해를 효율적으로 검색하고자 유전자 알고리즘에 기반한 다목적 최적화기법을 도입하였다. 또한, 최적화 과정에서 요구되는 다수의 비선형 시간이력해석을 수행하지 않고도 교량의 확률적 응답을 효율적으로 예측할 수 있는 추계학적 선형화 방법을 접목하였다. 제시하는 방법의 효율성을 검증하기 위한 수치 예로서 실제 교량인 남한강교를 고려하였고, 제안하는 방법과 기존 비선형 시간이력해석을 이용한 생애주기비용 기반 설계법을 각각 적용하여 내진성능을 비교하였다. 내진성능을 비교한 결과, 제시하는 방법이 기존의 비용에 기반한 최적설계보다 우수한 성능 및 경제성을 보임을 검증하였다. 또한, 다양한 지진하중에 대해서도 제안된 방법이 보다 개선된 성능을 보임을 확인하였다.
        4,500원
        77.
        2010.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Quality design methodologies have received constituent attention from a number of researchers and practitioners for more than twenty years. Specially, the quality design for drug products must be carefully considered because of the hazards involved in the
        4,000원
        78.
        2009.11 구독 인증기관 무료, 개인회원 유료
        Mahalanobis Taguchi-System (MTS) has been used in different diagnostic applications to make quantitative decisions by constructing a multivariate system using data analytic methods without any assumption regarding statistical distribution. MTS performs Taguchi's fractional factorial design based on the Mahahlanobis distance as a performance metric. In this study, MTS used for analyzing automotive ride satisfaction, which measured as a CSR(Customer Satisfaction Rating). The automobile which has a good CSR score treated as a normal group for constructing Mahalanobis space. The results of this research show that two attribute (Impact Hardness and Memory Shake) have a minus gain value and can be removed from further analysis. With the linear regression model, the difference of CSR between using all 6 attributes and just using significant 4 attributes compared.
        4,000원
        79.
        2009.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A variety of statistical methods are applied to model and optimize responses, related to product or system's quality, in terms of control and noise factors at design and manufacturing stages. Most of them assume continuous response variables but, assessin
        4,000원
        80.
        2009.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper, optimal design of the second arm in a SCARA robot was studied. The mass and moment of inertia of the second arm of a SCARA robot have great effects on performance indices such as cycle times and torques of the first and second axes. To reduce the mass and moment of inertia, optimal design was carried out by FEM analysis using parameters such as width and height of the arm rib, which was newly adopted to decrease the arm thickness in keeping stiffness. Computer simulation was conducted in X and Y directional paths. As a result of the optimal design, maximum torques of the first and second axes decreased by 10.1% in maximum.
        4,000원
        1 2 3 4 5