낮은 농도와 높은 농도의 염 용액에서 Poly(styrene sulfonic acid)(PSSA) 겔의 팽윤도에 대한 이온 특성화 효과를 SO3-와 페닐 고리의 수소결합을 통하여 조사하였다. 낮은 농도에서 PSSA 수화 겔의 수축 정도는 SO3-와 물 사이의 수소 결합에 대한 음이온의 불안정화 영향 때문에 음이온에서는 SCN-〈Br-〈Cl-〈F-의 순서를 따랐다. 재 팽윤은 계에서 특별한 상호 작용이 있을 때 높은 농도에서 관찰되었다. 반면 양이온에서 PSSA 겔의 수축은 Li+〈Na+〈K+〈Ca+2 순서를 따랐다. Ca+2 이온에서의 큰 수축 효과는 이가 양이온(+2)에 의한 PSSA 겔의 물리적 가교 때문에 나타난 것으로 보인다. 양이온에서의 수축은 SO3-와 양이온 사이의 상호작용 정도에 비례하였다. PSSA의 팽윤에 대한 이온 특성화 효과는 SO3-와 페닐 고리의 수화 수소결합에 대한 이온의 영향 정도, 양이온과 π 전자의 상호작용, 소수성 상호작용, 그리고 분산력 등이 복합적으로 작용하여 나타난다고 볼 수 있다.

PVA와 PAA블랜드의 용액주조법을 통하여 겔 고분자 전해질막이 제조되었다. 블랜드 내의 PAA함량은 30에서 80 wt% 사이 범위에서 조절되었다. 겔 고분자 전해질을 이용하여 아연공기전지를 제작하였다. 제조된 겔 고분자 전해질의 기계적, 전기적 특성을 인장실험과 임피던스 실험을 통하여 측정하였다. 아연공기전지의 성능은 current interrupt method와 정전류 방전실험을 통하여 측정하였다. 겔 고분자 전해질 내의 PAA함량이 증가함에 따라 인장강도 및 인장탄성계수가 감소하였다. 반면, PAA함량의 증가에 따라 겔 고분자 전해질막의 이온전도도는 증가하였다. 이와 같은 이온전도도의 증가의 아연공기전지 내에서의 효과는 current interrupt method와 정전류 방전실험에서 확인되었다. PAA함량이 높은 겔 전해질막으로 제조된 전지는 낮은 IR손실과 높은 방전용량을 보였다.

Fe doped TiO2 nanoparticles were prepared under high temperature and pressure conditions by mixture of metal nitrate solution and TiO2 sol. Fe doped TiO2 particles were reacted in the temperature range of 170 to 200˚C for 6 h. The microstructure and phase of the synthesized Fe doped TiO2 nanoparticles were studied by SEM (FE-SEM), TEM, and XRD. Thermal properties of the synthesized Fe doped TiO2 nanoparticles were studied by TG-DTA analysis. TEM and X-ray diffraction pattern shows that the synthesized Fe doped TiO2 nanoparticles were crystalline. The average size and distribution of the synthesized Fe doped TiO2 nanoparticles were about 10 nm and narrow, respectively. The average size of the synthesized Fe doped TiO2 nanoparticles increased as the reaction temperature increased. The overall reduction in weight of Fe doped TiO2 nanoparticles was about 16% up to ~700˚C; water of crystallization was dehydrated at 271˚C. The transition of Fe doped TiO2 nanoparticle phase from anatase to rutile occurred at almost 561˚C. The amount of rutile phase of the synthesized Fe doped TiO2 nanoparticles increased with decreasing Fe concentration. The effects of synthesis parameters, such as the concentration of the starting solution and the reaction temperature, are discussed.

최근 비만의 증가로 식품 산업계에서는 열량이 없거나 적은 원료로 고열량의 원료를 대체하려는 시도를 하고 있다. 본 연구에서는 젤라틴과 한천을 원료로 동일한 경도의 젤을 만들고 이들의 이화학적 특성을 비교하였다. 동일한 경도를 갖는 젤의 제조를 위하여 물 150 g에 정백당 60 g과 각각 젤라틴 12 g, 한천 2 g을 첨가하여 물 50 g 이 증발할 때까지 중탕하여 성형, 냉각한 후 젤을 제조하였다. 경도는 젤라틴과 한천 젤 각각 22.36, 22.80으로 동등하게 제조하였으며, 이 때 응집성, 부착성, 씹힘성 등은 젤라틴 젤이 더 높았다. 제조된 한천 젤과 젤라틴 젤의 pH는 각각 8.17, 7.05였으며, 당도는 각각 12.97, 14.43oBx를 나타내었다. 응력완화를 측정한 결과 5초 후 한천과 젤라틴 젤의 응력은 각각 3.3, 9.5 N 이였으며 각각 5초, 1초 동안에 급격히 응력이 감소된 후 서서히 완화되었으며 응력완화시간은 한천 젤은 2.54초 였고 젤라틴 젤은 측정이 불가능 하였다. 보수력은 한천과 젤라틴 젤이 각각 98.83, 100%였으며 이는 사용된 한천의 농도가 낮기 때문인 것으로 생각된다. 본 연구 결과는 젤라틴 대체 시 경도를 동일하게 하였을 경우 질감을 비롯한 다른 요소들이 어떻게 영향을 주는지를 판단하는데 도움이 될 것으로 사료된다.

Transparent liquid crystal gels with high oil content by fatty acid soap were investigated. The solubilization efficiency of the mineral oil was dependent on the process. The process of dropping water part into the solution of oil and surfactant was more efficient than the process of dropping water part into the surfactant solution and after that dropping oil. The fatty acid soap could not solubilize the high oil content, but under the certain range, addition of CDE (Coconut Diethanolamide), Arlacel 165 (Glyceryl Stearate/PEG-100 Stearate) and cetostearyl alcohol helped solubilize the high content oil. Also, the glycerin and water content had influence on the solubilization. Especially, higher oil content gel showed elastic feature.

The preparation of Y2O3-doped ZrO2 nanoparticles in Igepal CO-520/cyclohexane reverse micelle solutions is studied here. In this work, we synthesized nanosized Y2O3-doped ZrO2 powders in a reverse micelle process using aqueous ammonia as the precipitant. In this way, a hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a microemulsion consisting of cyclohexane as the oil phase, with poly (oxyethylene) nonylphenylether (Igepal CO-520) as the non-ionic surfactant. The synthesized and calcined powders were characterized by thermogravimetrydifferential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM). The crystallite size was found to nearly identical with an increase in the water-to-surfactant (R) molar ratio. A FTIR analysis was carried to monitor the elimination of residual oil and surfactant phases from the microemulsion-derived precursor and the calcined powder. The average particle size and distribution of the synthesized Y2O3-doped ZrO2 were below 5 nm and narrow, respectively. The TG-DTA analysis showed that the phase of the Y2O3-doped ZrO2 nanoparticles changes from the monoclinic phase to the tetragonal phase at temperatures close to 530˚C. The phase of the synthesized Y2O3-doped ZrO2 when heated to 600˚C was tetragonal ZrO2.

본 연구에서는 메조기공 티타니아/알루미나 막을 솔-젤법을 이용하여 제조하였다. 티타니아/알루미나 막의 기공구조 및 결정상은 하소 온도에 따라 조절될 수 있었다. 티타니아에 알루미나를 첨가하는 것은 티타니아 결정상이 아나타제상에서 루타일상으로 상변화 되는 것을 지연시켜 기공구조의 열적 안정화를 가져왔다. 5번 딥코팅하여 제조된 막의 두께는 10.3mum였으며, 평균 기공크기는 5 nm이었다. 기체 투과 실험 결과는 수소와 질소의 permeance는 각각 17.1×10 -7mol/㎡·s·Pa 및 4.7×10 -7mol/㎡·s·Pa이었다. 이 결과는 Knudsen 확산에 의해 설명될 수 있었다.

Carbon nanotube(CNT) plays an essential role in various fields of nano based science and technology. Recently, silica coated CNT composites are interested because they are useful for the optical, magnetical, and catalytic applications. In this report, carboxyl groups were introduced on the MWCNT using nitric acid. In order to maximize the silica encapsulation efficiency, carboxyl groups of MWCNT reacted with a silane coupling agent were used to prepare silica coated MWCNT. Due to their strong interaction between modified MWCNT and TEOS. Silica layer with a controllable thickness was achieved. Silica coated MWCNT were further utilized as the template for the synthesis of hollow silica nanotubes after 800℃ calcination.

This study was to evaluate the protein profile of seminal plasma using 2-DE in Hanwoo. Seminal plasma was harvested from five mature Hanwoo, and seminal plasma protein was extracted by M-PER Mammalian Protein Extraction Reagent. Proteins were refined by clean-up kit and quantified by Bradford method until total protein was . Immobilized pH gradient (IPG) strip was used 18 cm and 3~11 NL. SDS-PAGE was used 12% acrylamide gel. Each gels were visualized by comassie brilliant blue and silver staining. These spots were analyzed by MALDI-TOF MS and searched on NCBInr. The result, 20 proteins of 36 protein spots were searched through peptide sequencing on the NCBInr. 8 proteins profiled by 2-DE were proved through previous bovine studies and the name of each protein was albumin, nucleobindin, clusterin, TIMP-2, spermadhesin Z13, spermadhesin-1 and BSP proteins (BSP 30 kDa and BSP A1/A2). 12 new proteins were ATP synthase, protein MAK16 homolog, Transmembrane protein 214, E3 ubiquitin-protein ligase BRE1A, dual serine/threonine and tyrosine protein kinase, tissue factor pathway inhibitor 2, alpha-actinin-4, RUN domain-containing protein 3B, catenin alpha-1, protein-glutamine gamma-glutamyltransferase 2, plakophilin-1 and inter-alpha-trypsin inhibitor heavy chain H1 has not been previously described in the bovine seminal plasma study. These proteins may be contribute to define the type of proteins affecting fertility of male and improve the fertilizing ability of semen in Hanwoo.

New biological treatments were being developed at a record place, but their potential could be compromised by a significant obstacle: the delivery of these drugs into a body. Pharmaceutical delivery is now nearly as important as product. New systems are being developed, and Drug Delivery Markets Series cover these new systems. Transdermal Delivery System(TDS) is often used as a method of drug dosage into the epidermic skin. An approach used to delivery drugs through the skin for therapeutic use as an alternative to oral, intravascular, subcutaneous and transmucosal routes. Various transdermal drug delivery technologies are described including the use of suitable formulations, carriers and penetration enhancers. The most commonly used transdermal system is the skin patch using various types of technologies. Compared with other methods of dosage, it is possible to use for a long term. It is also possible to stop the drug dosage are stopped if the drug dosage lead to side effect. Polysaccharides, such as karaya gum and glucomannan, were selected as base materials of TDS. Also, these polymers were characterized in terms of enhancers, drug contents. Among these polysaccharide, the permeation rate of karaya gum matrix was fastest in fibric acid(ciprofibrate) such as lipophilic drug in vitro. We used glycerin, PEG400 and PEG800 as enhancers. Since dermis has more water content(hydration) than the stratum corneum, skin permeation rate at steady state was highly influenced when PEG400 was more effective for lipophilic drug. Proper selection of the polymeric materials which resemble and enhance properties of the delivering drug was found to be important in controlling the skin permeation rate. Especially, this result suggests a possible use of polysaccharide gel ointment matrix as a transdermal delivery system of anti-hyperlipoproteinemic agent.

Titanium dioxide (), which is one of the most basic materials in our daily life, plays a key role for environment purification. We synthesized nanoparticles by the hydrolysis reactions of titanium tetraisopropoxide using as a peptizing agent or as a chelating agent in the sol-gel method. The powder consisted of a rod shape or a spherical shape according to the concentration and kind of acid. The physical properties of nanoparticles were investigated with X-ray diffraction, SEM, BET analysis, and UV-Vis spectrophotometer.

Al2O3 has received wide attention with established use as a catalyst and growing application in structural or functional ceramic materials. On the other hand, the boehmite (AlO(OH)) obtained by sol-gel process has exhibited a decrease in surface area during phase transformation due to a decline in surface active site at high temperature. In this work, Al2O3-CuO/ZnO (ACZ) and Al2O3-CuO/CeO (ACC) composite materials were synthesized with aluminum isopropoxide, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate or zinc (II) nitrate hexahydrate. Moreover, the Span 80 as the template block copolymer was added to the ACZ/ACC composition to make nano size particles and to keep increasing the surface area. The ACZ/ACC synthesized powders were characterized by Thermogravimetry-Differential Thermal analysis (TG/DTA), X-ray Diffractometer (XRD), Field-Emmision Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller (BET) surface analysis and thermal electrical conductivity (ZEM-2:M8/L). An enhancement of surface area with the addition to Span 80 surfactant was observed in the ACZ powders from 105 m2/g to 142 m2/g, and the ACC powders from 103 m2/g to 140 m2/g, respectively.

다공성 Poly(propylene) 분리막의 지지 하에 전해질 용액 (EC/DEC 1 : 1 혼합물 내의 LiPF6 1 M 용액) 내에서 DEGDMA [Di(ethylene glycol) dimethacrylate]의 70℃ 열중합을 통하여 겔 고분자 전해질(GPE)막이 합성 되었다. 합성된 겔 고분자 전해질막의 이온전도도 및 전기화학적 안정성은 AC 임피던스법 및 CV (cyclic voltametry)법에 의하여 측정 평가하였다. 겔 고분자를 전해질로, 그리고 양극 및 음극으로는 각각 LiMi0.8Co0.2O2 및 graphite로 이용하여 리튬이온전지(LIB)도 제작하였다. 열중합을 통하여 리튬 이온전지에 적합한 이온전도도(10 -3 S/cm 이상) 및 전기화학적 안정성을 보이면서 자체적인 성상을 유지하는 겔 고분자 전해질막을 얻을 수 있었다. 단량체 함량 5%의 전구체로 제작한 겔 고분자 전지는 단량체 함량이 7.0% 및 10.0%인 경우에 비하여 우수한 고율 및 충-방전 효율을 보였다.

Transparent conducting aluminum-doped ZnO thin films were deposited using a sol-gel process. In this study, the important deposition parameters were investigated thoroughly to determine the appropriate procedures to grow large area thin films with low resistivity and high transparency at low cost for device applications. The doping concentration of aluminum was adjusted in a range from 1 to 4 mol% by controlling the precursor concentration. The annealing temperatures for the pre-heat treatment and post-heat treatment was 250˚C and 400-600˚C, respectively. The SEM images show that Al doped and undoped ZnO films were quite uniform and compact. The XRD pattern shows that the Al doped ZnO film has poorer crystallinity than the undoped films. The crystal quality of Al doped ZnO films was improved with an increase of the annealing temperature to 600˚C. Although the structure of the aluminum doped ZnO films did not have a preferred orientation along the (002) plane, these films had high transmittance (> 87%) in the visible region. The absorption edge was observed at approximately 370 nm, and the absorption wavelength showed a blue-shift with increasing doping concentration. The ZnO films annealed at 500˚C showed the lowest resistivity at 1 mol% Al doping.

이 연구의 목적은 고라니(Hydropotes inermis argyropus)의 위내용물을 대상으로 PCR-DGGE 방법을 이용하여 그 식이습성을 조사하는데 있다. 이 연구를 위해, 강원도 철원과 전라남도 동부지역 등에서 자연사 혹은 로드킬에 의해 죽은 고라니 사체의 위에서 식이물 샘플을 채취하였다. 총 44개체의 위내용물에서 각각 DNA를 추출하였고, 두 가지의 프라이머(rbcLZ1과 rbcL19bR)를 이용하여 ribulose-1,5-bisphosphate carboxylase large subunit(rbcL) gene을 PCR 증폭하였다. 44개의 샘플 중 29 샘플에서 성공적으로 PCR을 수행하였다. 이 29개 partial rbcL gene의 PCR product는 PCR-DGGE에 이용되었다. 식이물에 대한 분석결과 총 6과의 식물이 확인되었다. 강원도 철원의 경우, 5과가 나타난 반면, 전라남도 동부의 경우, 3과만이 확인되었다. 이 연구에서는 종수준의 먹이식물의 구별에는 실패하였 지만, 차후 이 PCR-DGGE 기법은 고라니를 포함한 초식동물의 식이습성을 분석하는데 하나의 가능성 있는 방법이 될 것으로 생각된다.

세공 크기가 2.6 μm인 SPG (Shirasu porous glass) 막이 설치된 실험실 규모의 막유화 장치를 사용하여 막유화 에멀젼-겔 공정의 변수 조절을 통해 구형상의 실리카 입자를 제조하였다. 막유화 에멀젼-겔 공정의 변수로는 분산상 압력, 연속상 내 안정제 및 유화제의 농도, H2O/TEOS 비율 및 연속상에 대한 분산상의 비율로 설정하고, 이들 변수가 제조된 실리카 입자의 크기와 분포에 미치는 영향을 검토하였다. 막유화의 공정변수들 중에서 분산상 압력과 연속상에 대한 분산상의 비가 증가할수록 실리카 입자의 크기가 증가하였다. 반면 안정제 및 유화제의 농도, H2O/TEOS 비가 증가할수록 입자의 크기가 감소하였다. 막유화 에멀젼-겔 공정변수의 조절을 통해 최종적으로 평균 입자 크기가 3 μm인 비교적 입도분포가 균일한 구형상의 실리카 입자 제조가 가능하였다.

A fiber fraction (Aloe cellulose), the by-product obtained from Aloe vera gel processing was freeze dried and investigated for in vitro glucose/ bile acid retarding effects of powdered sample (100 mesh) comparing with commercial α-cellulose as a reference sample. We also examined the effectiveness of physiological functionality such as the antiobesity and anti-constipation on Sprague-Dawley (SD) rat. The Aloe cellulose powders during in vitro dialysis experiment for 2 hours exhibited the glucose and bile acid retarding index of 20.32-35.2% and 53.13-28.30%, respectively. Especially, freeze dried aloe cellulose showed the 2.5 and 1.2-6 times higher effect on in vitro glucose and bile acid retardation than those of α-cellulose. These relatively good retarding effects on glucose and bile acid diffusion suggest a potential of preventing from diabetes and arteriosclerosis of some extent. Also, the results from animal experiments on SD rats fed a high-fat diet for 4 weeks suggested that Aloe cellulose might be used as a novel dietary fiber showing an effective anti-obesity and anti-constipation effect.

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial α-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24±0.15 mL/g), WHC(6.40±0.19 g water/g solid) and OHC(10.32±0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial α-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% CaCl2) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of α-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

In vitro physiological functions such as jack bean (Canavalia ensiformis) urease inhibitory activity and retarding effect of glucose/bile acid of Aloe vera gel concentrated by the optimized DIS (Dewatering Impregnation & Soaking) process conditions were examined. Urease inhibitory activity of DIS aloes ranged from 84.6 to 94.4%, which was similar to or higher than 86.3% of fresh aloe. Also, urease inhibitory activity of DIS aloes was maintained at initial levels after heat treatment (90oC, 10 min.) and drying treatment (freeze or hot air drying). Urease inhibition pattern from Lineweaver-Burk plot indicated general non-competitive inhibition, and inhibition constants (KIE and KIES) of DIS aloes were 41-149 and 87-163 μL/mL, respectively. DIS(glucose) and DIS (polyethylene glycol) exhibited the highest retarding effect of glucose and bile acid. Their retarding effects were about 1.6 and 1.8 folds higher than that of fresh aloe after 0.5 and 1 hr of the dialysis, respectively. Conclusively, the above in vitro physiological functions of Aloe vera gel concentrated by DIS process suggested that aloe products treated with DIS would have the potential benefits for protection against Helicobacter pylori and reduction of blood glucose and cholesterol levels.

In this study, the silica-based hybrid material with high barrier property was prepared by incorporating ethylene-vinyl alcohol (EVOH) copolymer, which has been utilized as packaging materials due to its superior gas permeation resistance, during sol-gel process. In preparation of this EVOH/SiO2 hybrid coating materials, the (3-glycidoxy-propyl)-trimethoxysilane (GPTMS) as a silane coupling agent was employed to promote interfacial adhesion between organic and inorganic phases. As confirmed from FT-IR analysis, the physical interaction between two phases was improved due to the increased hydrogen bonding, resulting in homogeneous microstructure with dispersion of nano-sized silica particles. However, depending on the range of content of added silane coupling agent (GPTMS), micro-phase separated microstructure in the hybrid could be observed due to insufficient interfacial attraction or possibility of polymerization reaction of epoxide ring in GPTMS. The oxygen barrier property of the mono-layer coated BOPP (biaxially oriented polypropylene) film was examined for the hybrids containing various GPTMS contents. Consequently, it is revealed that GPTMS should be used in an optimum level of content to produce the high barrier EVOH/SiO2 hybrid material with an improved optical transparency and homogeneous phase morphology.