This paper is intended to develop a Bayesian decision model for the repair of deteriorating system. A non-homogeneous Poisson process with a power law failure intensity function is used to describe the behavior of the deteriorating repairable system. The decision on whether to have minimal repair or imperfect repair should be made on the occurrence of a failure. However, it is difficult to make a reasonable decision due to many uncertainties intrinsic in repair actions. In this paper, prior distributions are used in order to analyze the uncertainties embedded in the decision alternatives. Especially, a prior distribution for imperfect repair with probabilistic reduction in the failure intensity is proposed. In addition, mathematical expressions to calculate the expected prior loss of each repair alternative are proposed.

Supply Chain Management(SCM) system is a critical investment that can affect future competitiveness and performance of a company. Selection of a right SCM system is one of the critical issues. This paper provides the characteristic factors of SCM system selection and the SCM system evaluation and selection model based on Analytic Hierarchy Process(AHP). The proposed model can systematically construct the objectives of SCM system selection to support the business goals. A empirical example demonstrates the feasibility of the proposed model and the model can help a company to make better decision-making in selecting SCM system.

As the basic study about improvement of yellow croaker drift gill net fishing implement and development of the fishing system, this study drew problem after synthetically analyzing hauling system of yellow croaker drift gill net used in the coast of Chuja Island and tested several characters and analyzed in hauling process with 5 step net hauler model for improving the problem. The analysis results are as follows. When the angle between axises of drum centers was small, it showed the tendency that hauling time was fast. Hauling time was faster when drum was 5 step rather than 3 step. When drum was 5 step, slippery phenomenon was small and hauling was stable. Tension was larger when drum was 5 step rather than 3 step. When drum was 5 step, the range of change of the maximum and minimum value was small and hauling was stable. When drum was 3 step, there was following formula between hauling time (Ht3) and angle between axises of drum centers (Ag) Ht3 : (7.15Hs-0.81) Ag-0.81, when drum was 5 step there was following formula.Ht5 : (6.45Hs-0.75) Ag0.10, here, Hs is hauling speed. When drum was 3 step and hauling speed was 28cm/sec, tension was T=0.08A83-1.60Ag3-0.49Ag+369.56(r=0.99), when drum was 5 step, tension was, T=-0.01Ag3+1.96Ag2-34.05Ag+414.58 (r-0.99), here, T was tension(g).

Many researchers have proved that risk measurement of information systems is a very effective tool for improving confidence of information systems. However, information system risk in Korea still includes many subjective judgements. This study deals with applying a quantitative model to improve risk measurement of information system quality. First of all, we have come up with solutions to improve the evaluation efficiency on risk measurement. We have merged the risk guidelines of COBIT and CMM, and developed a quantified evaluation scheme that call by risk point. We have proved the validity of this model by interviews with experts and by case studies.

EPC seeks to minimize variability by transferring the output variable to a related process input(controllable) variable, while SPC seeks to reduce variability by detecting and eliminating assignable causes of variation. In the case of product control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We consider an alternative EPC model with second-order autoregressive disturbance. We compare three control systems; EPC, EPC combined with EWMA. This paper shows through simulation that tlhe performance of the integrated model of EPC and EWMA is more preferable than that of EPC.

This paper is intended to develop a Bayesian decision model for the repair of deteriorating system. A non-homogeneous Poisson process with a power law failure intensity function is used to describe the behavior of the deteriorating repairable system. The decision on whether to have minimal repair or imperfect repair should be made on the occurrence of a failure. However, it is difficult to make a reasonable decision due to many uncertainties intrinsic in repair actions. In this paper, prior distributions are used in order to analyze the uncertainties embedded in the decision alternatives. Especially, a prior distribution for imperfect repair with probabilistic reduction in the failure intensity is proposed. In addition, mathematical expressions to calculate the expected prior loss of each repair alternative are proposed.

돼지 웅성 페르몬인 5a-androst-16-en-3-one을 대체할 수 있는 활성 분자를 탐색하여 가축의 생산과 수요를 조절하기 위한 생물학적 자극 통제 수단으로 활용하고자 냄새 분자로서 2-cyclohexyloxytetrahydrofurane (A) 및 2-phenoxytetrahydrofurane (B) 유도체들의 구조 변화와 수용체인 porcine odorant binding protein (pOBP)에 대한 결합친화력 상수(p[Od.]/sub 50/) 사이의 정량적인 구조-활성관계에 관한 분자 HQSAR 모델XI을 유도하였다. 냄새 분자 중에서 cyclohexyl-치환체(A)가 phenyl-치환체(B)보다 높은 결합 친화력을 나타내었으며(A>B) 모델XI은 분자 조각크기(5∼8), 홀로그램 길이(97 bin)의 키랄성(chirality)조건에서 예측성(q²=0.916)과 상관성(r²=0.988)이 매우 양호하였다. 기여도(contribution map)로부터 냄새 분자의 결합 친화력 상수에 기여하는 부분은 2-oxyfuryl group의 C3 및 C5 원자인 반면에 cyclohexyl 고리상 tert-butyl group의 중심 탄소 원자와 furyl group의 C4 원자 부분은 기여하지 않았다.

PAHs 화합물은 유기탄소화합물의 불완전연소에 의해 주로 발생하는데, 일반인들은 대기오염에 의한 호흡노출과 가열조리식품의 경구섭취가 주요 인체노출경로로 알려지고 있다. 본 연구에서는 PAHs화합물에 오염된 식품이 식생활에 많은 부분을 차지하고 있어 우리나라 대표식품을 참고로 가정식과 외식의 식단을 작성하고 작성한 식단을 근거로 식품 중 PAHs화합물 오염도를 분석하여, 분석된 PAHs화합물의 오염도 자료를 활용한 가정식과 외식 1끼 식사를 기준으로 인체노출량을 비교하고, 성인 하루 가정식 2회, 외식 1회 섭취시의 1일인체노출량을 평가하였다. 다빈도·다소비식품에서 PAHs화합물 오염도를 분석한 결과 총 PAHs농도는 2.00~141.28 ug/kg의 범위로 검출되었으며, 멸치볶음이 가장 높게 나타났다. 상대독성계수(TEFs)를 활용하여 환산한 독성등가량은 0.03~l.31 ugTEQ_(BaP)/kg 범위였고, 가장 높은 값을 가진 식품은 햄버거이었다. 식품별 오염도와 노출변수들을 고려하여 산출한 끼니별 가정식과 외식에서의 PAHs 화합물 평균인체노출량은 각각 2.4×10^(-3) ugTEQ_(BaP)/kg/meal와 4.0x10^(-3) ugTEQ_(BaP)/kg/meal으로 외식이 가정식보다 PAHs화합물의 인체노출이 1.7배가 높은 수준으로 나타났다. 햄버거, 숯불쇠고기구이, 숯불삼겹살구이, 고등어구이 등은 PAHs화합물 오염도와 독성등가량 및 1회분식품섭취량이 모두 높아 PAHs화합물의 주요노출기여 식품인 것을 알 수 있었다. 가정식에서 미역국이 1.8x10^(-3) ugTEQ_(BaP)/kg/meal으로, 외식에서는 햄버거가3.9x10^(-3)ugTEQ_(BaP)/kg/meal으로 기여도가 가장 높았다 하루 3회 식사를 고려한 1일 PAHs화합물인체노출량수준은 8.0x10^(-3)~9.7×10^(-3) ug/kg/day 이었다. 본 연구 결과가 PAHs 화합물의 안전성평가와 기준규격설정의 필요성 및 식품안전관리를 위한 규제를 제정하는 기초 자료가 되길 바라며, PAHs화합물의 고노출상황을 줄일 수 있는 개개인의 계획된 식단 작성시, 이에 대한 정보를 제공하고자 한다.

본 연구에서는 폐쇄형 식물 생산시스템 내에서 생체정보에 의한 최적 환경제어와 식물의 환경스트레스 판단을 위하여 엽록소형광 분석법으로 광합성효율 모델을 만들었으며, 광합성효율 모델에 유전알고리즘을 적용하여 재배환경 최적화 프로그램의 응용성을 평가하였다. 6가지 미기상 요인 중 5가지는 고정하고 1가지씩만 변화시켜 가며 측정한 Fv'/Fm'이 최대가 되는 환경조건은 기온 21℃, CO2농도 1,200~1,400ppm, 상대습도 68%, 기류속도 1.4m·s-1, 배양액온도 20℃이었으며 PPF가 140μmol·m-2·s-1 보다 증가할수록 광합성 효율은 감소하였다. 광합성효율모델의 오차는 평균 2.5%였다. 재배환경 최적화 프로그램으로부터 계산된 밀폐형식물 생산시스템내에서 상추의 최적재배환경조건은 기온 22℃, 배양액온도 19℃, CO2농도 1,400ppm, 기류속도 1.0m·s-1, PPF 430μmol·m-2·s-1, 상대습도 65%이다. 이상의 연구 결과로부터 광합성 효율 모델을 이용하여 식물 생산시설의 환경모니터링 시스템과 식물 생체정보에 의한 최적제어시스템의 개발이 가능함을 확인하였다.

This paper addresses the transportation planning that is based on genetic algorithm for determining transportation time and transportation amount of minimizing cost of distribution system. The vehicle routing of minimizing the transportation distance of v

The traditional Kanban needs a lot of preconditions for fitting conditions of dynamic production processing environment. The traditional Kanban isn't suitable conditions of dynamic production processing environment. Therefore conditions of dynamic production processing environment is needed more stable system. This study is describe CONWIP system such as suitable in dynamic production processing environment. Most Pull system is a Kanban system than use Kanban cards or signal for production management and inventory control. The object of Kanban system is reducing inventory between shop-floor that can reduce inventiry cost. If the system reduce the number of Kanban cards would be reduce the working process WIP, can be reduced and can be found all potential problem of production between shop-floors. This study apply to CONWIP system model for Korean industrial companies.

This study suggests a safety management model for construction management (CM) suitable to domestic conditions so that inefficiency resulted from the operation of construction projects by public and private institutes according to different systems can be eliminated for the securing of systematic and efficient safety management. Based on the suggested safety management model, this study also develops a safety management information system that can efficiently and consistently manage and maintain a large quantity of information, and give necessary supports in a speedy way in the managing of construction projects.

본 연구는 현용 전어 선망 어구.어법에 대한 실태조사에서 파악된 문제점과 조업시 어구의 수중 형상 및 어구에 대한 어군의 행동을 조사.분석한 전보의 결과를 바탕으로 어구 개발에 대한 방향을 설정한 후 고려되는 몇 가지 형태의 어구를 제시하고 이들 어구에 대한 모형 실험을 실시하였는데, 그 결과를 요약하면 다음과 같다. 1. 현용 어구와 현용 어구의 75% 규모로 축소 (뜸줄 길이 기준)한 어구에 짐줄을 채택하였을 경우, 짐줄이 완전히 체결되기도 전에 발줄이 수면으로 부상하거나 수심 2∼3m 에서 짐줄이 체결되어 현용 어구구조에는 짐줄을 사용하는 것은 오히려 어획 성능을 저하시키는 것으로 나타났다. 2. 뜸줄과 발줄의 길이는 현용 어구의 60% 규모로 하고 그물의 양쪽 옆 부위를 최소 전개 깊이인 20m로 고정한 채 중앙부로 갈수록 깊이를 점차 증대시킨 어구 중 중앙부 깊이가 50m인 어구는 짐줄이 수심 20∼23m 이상에서 체결되고, 중앙부 깊이가 40m 와 30m인 어구는 체결 수심이 7∼15m 사이로 나타나 모든 어구에서 어군을 차단하는데 충분한 깊이를 보이지만 조업 어장의 수심과 조류 등을 고려하였을 경우 현장에 적용하기에는 중앙부 깊이가 40m 와 30m인 어구가 더 유리하다고 판단된다.

Construction Management(CM) system, which was introduced some years ago to large national construction projects, such as the construction of Incheon New Airport, construction of high-speed railroad and World Cup stadiums, is considered to be still in its early stage and safety at each step of CM is very poorly controlled. In an attempt to improve such inferior safety control of domestic CM, this study analyzed safety control operation system in CM home and abroad and suggested a model for the construction of safety control management information system suitable to the conditions of Korea.

While a number of Korean companies have undergone ceaseless restructuring to survive today's rapidly changing global economy, the brick and mortar industry has been exerting their efforts to enhance the productivity through the development of new products, quality improvement, cost reduction measures. At present, various risk-evaluation measures have been taken in the fields at the discretion of an enterpriser, though, the effective methods enabling quantitative analysis are insufficient. Accordingly, this study is intended to contribute to the synthetic safety manage -ment in the factory fields and to suggest the quantitative -risk-analysis system by introducing such safety-estimation steps as assortment of processes, pre-assessment of risk factors, decision of risks, counter measures against studied risks, establishment of remedies.