전 세계적으로 노후교량이 급증함에 따라 교량 신설 뿐만 아니라 교체 및 유지관리의 중요성이 강조되고 있다. 기존 교량의 교체 및 신 설에 주로 적용되고 있는 현장타설바닥판은 초기균열로 인한 품질저하 우려, 인건비 상승, 보수 및 교체의 어려움, 공기 증가 그리고 도심 지 교통체증으로 인한 간접비용 증가 등 여러 문제점을 내포하고 있다. 반면에 공장에서 사전 제작후 현장에서 조립되는 프리캐스트 바닥 판 공법은 공장제작으로 품질확보, 급속시공이 가능하므로 기존 현장타설 바닥판의 효과적인 대안으로 제시되고 있다. 이러한 프리캐스트 바닥판은 바닥판간 이음부가 균열 및 누수 등으로 가장 취약하므로 소요강도와 내구성을 확보할 수 있는 바닥판 간 이음부 연결기술이 중 요하다. 본 연구에서는 기존공법을 개선한 요철형 이음단면을 갖는 프리캐스트 교량 바닥판을 제안하고 이음형식별 요소실험을 통해 휨성 능을 비교 및 검증하였다.

Ultra high strength concrete was introduced into architectural members. The current ultra high strength concrete can achieve compressive strengths up to 200 MPa and tensile strengths up to 20 MPa. In this study, the flexural and shear strengths in precast structural beams using ultra high strength concrete are evaluated and compared with reinforced concrete beams. This paper also provide a design flexural strength formula for the developed members.

Regarding deck replacement of bridge structures, it is important to minimize total construction time and costs ensuring safety of it. Since cast-in-place concrete deck takes a long time for replacement, precast concrete deck system is considered as an effective alternative. Structural performance, economic feasibiltity and constructability of precast deck system are mostly affected by joint properties between precast deck panels. To improve the joint properties, this research presents a new precast deck system of ribbed section joint with protruding lower concrete and verifies tits applicability through parameter tests.

In this study, A preliminary research has been attempted by design and strength analysis on a series of precast ultra high-strength concrete slab systems in order to evaluate. To compare with conventional reinforced concrete slabs, current slab systems can improve serviceability and ultimate load capacities, crack control, and durability, so as to apply in long span, lightweight, and slender building slab systems.

The development and field application of the environment friendly Precast concrete by replacing the blast furnace slag were examined. As a result, it was found that compressive strength of Precast concrete used 50% of blast furnace slag was similar to Plain. While 70% of blast furnace slag was slightly decreased. In the result of Mock-up Test, the compressive strength of Precast concrete used 50% of blast furnace slag was satisfied with the target strength. but greening phenomenon occurred. Although greening occurred on the surface of the Precast concrete, it was gradually disappeared over the age. Therefore, the use of blast furnace slag was available up to 50%.

This study evaluated the lateral thermal deformation induced by environmental factors for a precast I-girder. Lateral temperature gradients across the cross-section of the girder were calculated using analytical equations based on daily solar radiation, temperature variation, and wind speed. Then the lateral thermal deformation showed an average of approximately 40% to 71% of the tolerance for the initial lateral deformation of the girder, defined in the PCI bridge design standard.

Precast modular bridge was designed by ultimate strength design method(USD), though it is aimed at development of the world's first permanent bridge applying modular technology. Therefore, it is necessary to review the LSD in order to achieve the goal. In this study, the slab-type precast modular bridge(span 8m) was examined on the stability of bending moment in the longitudinal direction by the LSD.

1994년 성수대교 붕괴사고 이후 강구조물의 품질 관리를 위해 철강구조물제작공장 인증제도가 건설기술관리법에 도입되어 법정임의 인증제도로 운영되고 있다. 그러나 콘크리트 부재의 공장 생산 방식인 PC (Precast Concrete)에 대해 국가적인 품질인증 체계는 마련되어있지 않다. 이에 건축 구조용 PC를 대상으로 적절한 품질인증제도 도입을 위해 북미, 유럽, 일본 등의 PC 품질인증제도를 조사하였다. 북미에서 PC 공장인증제도를 운영하고 있는 곳은 PCI, NPCA, CPCI 등이 있다. 유럽에서 PC 제품을 판매하기 위해서는 CPR 305/2011을따르도록 법으로 정해져 PC 제품을 포함한 모든 건설 제품은 2013년 7월부터 CE 마크를 의무적으로 부착해야 한다. 일본의 경우 토목용PC 제품은 제품인증인 JIS 마크 인증을 받도록 되어 있고 건축 구조용 PC를 생산하는 공장은 일본 프리패브협회의 심사를 받고 있다. 이런 조사 결과에 근거하여 국내 인증 체계에 부합될 수 있도록 건축 구조용 PC 제품의 인증제도의 도입 방향을 이 논문에 제시하였다.

Precast concrete deck through factory production of precast products can minimize construction method and the traffic congestion and can be effective alternative to conventional cast-in-place. In particular, in the case of precast deck, connection details between precast decks are very important because durability and load-bearing performance of structures is greatly affected by them. so conneciotion details to secure constructability and safety, affordability are very important. In this study, a new connection detail on the precast deck connections are proposed and test results comparison from various parametric experiments would be performed to verify the applicability of the proposed technique.

In this research, a total of seven specimens were tested under reversed cyclic loading, controlled by displacement and three times of reversed loads were given at each displacement. The goal of experiments is to identify the seismic and structural performance of pure dry precast concrete beam-column joints using bolt type connection and/or prestressing methods. Two representative results are examined and compared in this paper.

This paper introduce a calculation method for the length of steel and rebar due to load onto the member in large scale structure using precast composite structure system. As result, cost effectiveness of members in large scale structure is procurable by utilizing steel and rebar economically.

This paper presents a half-precast composite concrete slab using a strain-hardening cementitious composites (SHCC). The flexural characteristics of SHCC-RC Composite slab was evaluated with a conventional reinforced concrete slab and the composite slab was excellent in crack control to compare with the reinforced concrete slab.

As the weight is increased by the quantity and size of the members in large scale structures, precast column-beam joints should be designed in consideration of the assembly process. This paper was presented a way to reflect the construction difficulty such as interference of rebar at the end of beam when you design rebar joints and calculation of the length of the embedded steel.

This paper presents a design process of columns in precast concrete frame building structure constructed by using hollowed precast concrete (HPC) column. An example PC frame building was designed and the structural safety of HPC columns was checked as a form for during slab construction and a composite column for design load after construction based on the previous research.

To strengthen the competitiveness of the domestic precast concrete industry, any legal or institutional measures for a guarantee of quality and safety standards are required. So, the overseas cases for precast concrete certification program were investigated and analyzed to present the new certification program in Korea.

As existing bridges become deteriorated, deck replacement is highly demand. Precast concrete deck system is considered as a effective alternative to in-site concrete deck system in terms of reducing construction period and securing deck quality. In this paper, technology trends in precast deck connections are studied, which is an important factor for securing deck performance. The result shows that studies in precast deck connections are recently increasing drastically and development of new precast deck system is needed.

이 연구에서는 고로슬래그 미분말을 사용한 프리캐스트 보의 전단성능에 대하여 평가하였다. 실험체는 고로슬래그 미분말 치환율에 따라 총 4체의 실험체를 제작하였다. 모든 실험체는 전단경간비 2.5, 보의 폭 200mm, 유효깊이 300mm이며, 3점 가력을 받는 단순보로 계획하였다. 또한 이 연구에서는 실험체의 전단강도를 예측하기 위하여 기존 전단강도 예측식을 이용하여 실험결과와 비교하였으며, 총 89개의 기존 전단 실험결과를 이용하여 실험결과와 비교 분석하였다. 실험결과, 고로슬래그 미분말을 치환한 실험체는 포틀랜드 시멘트만을 사용한 실험체와 비교분석한 결과 유사한 전단성능을 나타내었다.

This study utilizes an equation proposed for the calculation of the lateral-torsional buckling moment of a reinforced concrete beam to evaluate the lateral rollover stability of a precast concrete girder particularly during construction. The result of this study showed the lateral-torsional capacity of a girder significantly decreased with an increase in the initial sweep of the girder. The capacity of a girder with the initial sweep in the order of around two times the PCI tolerance becomes smaller than its ultimate flexural capacity.

In this paper, experimental study of composite slab systems was performed. The slab system could minimize reinforcements and improve crack control by applying high-ductile cementitious composites. In the application of the field construction, the construction process of the half-precast system could minimize the formwork of concrete construction.

The objective of this study is to investigate the safety of the slab type precast module. To achieve this, the designed slab type precast module was made using the manufacturing facility for the precast modular superstructure and the flexural performance test was conducted.