This study aims to analyze the income structure, cost structure, and profit structure based on data related to the business performance of the boat seine fishery from 1990 to 2020, and to identify the direct and indirect factors affecting fishery profitability through panel regression analysis. The main analysis results are as follows. First, it was found that fish catch has a significant amount of impact on fishery profitability, which is a key factor in improving the profitability of anchovy boat seine fishery. Second, it is necessary to develop carbon-reduced fishing gear, develop fleet-reduced fishing gear, and improve the operating system in order to increase fishery profitability for the short run. Third, it is necessary to create and maintain sustainable profitability for the long run, the continuous fishing vessels buyback program, an active responses to climate change, and the follow-up investigations about marine aggregate extraction in the south sea EEZ are needed.

This study was conducted in order to improve opening efficiency of the miniaturized small-scale net for anchovy boat seine gear to reduce the fleet size. Field experiment was performed to observe geometry of nets by catcher boats. When the distance between the two ships was 150, 300 and 450 m and the speed of towing nets was 0.6, 0.9, and 1.2 kt, the vertical opening and actual opening of each part of the miniaturized small-scale net was as follows: the front part of the wing net, 6.8-9.5 m, 45-63%; the middle part of the wing net, 16.1-30.7 m, 34-65%; the entrance of the inside wing net, 21.6-41.2 m, 44-84%; the square and bosom, 17.4-34.0 m, 38-75%; the entrance of the body net, 16.5-29.4 m, 36-64%; the entrance of the bag net, 14.5-21.9 m, 70-106%; the flapper, 6.7-7.7 m, 81-83%, and the end of the bag net, 8.6-10.9 m, 64-81%. The tension of towing nets was measured to be 2,734-6,812 kg approximately, which indicates that the fleet can tow nets with 350 hp, the standard engine horse power. The fishing operation time was shortened comparing to existent net with the large-scale buoy attachment operation. It was also possible to operate the ship without fish detecting boat.

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

This study was conducted in order to improve fishing gear for existent net of the anchovy boat seine. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 100, 300, and 500 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the existent net was as follows: the middle part of the wing net, 12.9-26.6 m, 19-39%; the entrance of the inside wing net, 23.3-35.3 m, 40-60%; the square and bosom, 18.4-24.2 m, 37-49%; the entrance of the bag net, 19.0-23.3 m, 79-96%; the flapper, 13.2-15.3 m, 142-161%; and the end of the bag net, 13.2-15.7 m, 51-61%. The actual net opening of each part of the existent nets used in this study was lower than that of the design net height, due to the low net height of the wing net and the inside wing net, it limited a range of the net height of the square and bosom. The opening of the entrance of the bag net caused the net pocket shape and inflated some parts of the nets. The tension of towing nets was measured between 4.4 and 11.0 tons, and it is necessary to reduce the structure and improve the structure of the bag net.

For scientific research, a number of acoustic surveys using commercial echosounders equipped in fishing vessels were conducted throughout the world; however, few studies were performed in South Korea. Hence, this research is an preliminary study for presenting the application of a sounder from a fishing vessel. The fishing operations using a pair trawler (7 Cheonghae) was conducted in the Northwest-Western sea of Jeju Island from 20 to 23 April, 2016. Substantial impulse noises and attenuated signals were eliminated by the latest algorithms. Acoustic signals were grouped into the fish aggregations and long layer-like signals. The fish aggregations appeared between 30 and 60 m, and long layer-like signals showed the diurnal vertical migration. Energetic, morphological and positional properties of the fish aggregations and layer-like signals were described. The fish aggregations appeared mainly between sunrise and sunset; however layer-like signals tended to be presented regardless of time in consideration of the time series analysis. On the basis of the consignment sales, Scomberomorus niphonius, the target species of F/V 7 Cheonghae, was the highest catch with 4,280 kg (74.6%) and might have appeared in fish aggregations and layer forms.

국내 교육용 천문대 네 곳과의 협력으로 세 개의 기선을 구축 및 동시 관측을 수행하여, 지구근접천체 Amor족 소행성인 1036 Ganymed의 지심시차와 거리, 운동 상태를 알아보았다. 관측은 2011년 9월에서 11월 동안, 동시 관측이 가능한 날에 이루어졌다. 1036 Ganymed의 거리는 9월 26일 0.40 AU, 10월 11일 0.40 AU, 10월 25일 0.34 AU 이었 고, 각각은 미국 제트추진연구소가 제시하는 측정거리와 비교한 결과 오차 범위내의 값이었다. 1036 Ganymed는 관측 기간 동안 순행 운동을 보였고, 접선 각속력은 0.04-0.05'' sec−1로 측정되었다. 본 연구를 통해 국내에 있는 교육용 천문 대들의 동시 관측으로 0.4 AU 부근의 소행성에 대해 약 5% 정도의 오차 범위를 가지는 거리 측정치를 얻을 수 있음 을 보였다. 이로부터, 교육용 천문대 간의 네트워크를 기반으로 한 협력 관측 수행이 이루어지고 새로운 연구연계 교육 프로그램의 유형으로 활용 될 수 있을 것으로 기대된다.

The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti’s modeling rule and Kim’s modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net v. Because resistant coefficient k decreases exponentially according as flow velocity v increases to make k cv-m, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti’s modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given c=4.9 (kgf․s2/m4) and m=0.45, R (kgf) of bottom pair trawl net could show R =4.9Sv1.55 using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.

The negative factors of fishery in environmental aspect of view are Greenhouse gas emission problems by high usage of fossil fuel, destruction of underwater ecosystem by bottom trawls, reduction of resources by fishing and damage of ecosystem diversity. Especially, the Greenhouse gas emission from fisheries is an important issue due to Cancún meeting, Mexico in 1992 and Kyoto protocol in 2005. However, the investigation on the GHG emissions from Korean fisheries did not much carry out. Therefore, the quantitative analysis of GHG emissions from Korean fishery industry is needed as a first step to find a relevant way to reduce GHG emissions from fisheries. The purpose of this research is to investigate which degree of GHG emitted from fishery. Here, we calculated the GHG emission from Korean bottom pair trawl fishery using the LCA (Life Cycle Assessment) method. The system boundary and input parameters for each process level are defined for LCA analysis. The fuel use coefficient of the fishery is also calculated. The GHG emissions from the representative fishes caught by bottom pair trawl will be dealt with. Furthermore, the GHG emissions for the edible weight of fishes are calculated with consideration to the different consuming areas and slaughtering process also. The results will be helpful to understand the circumstances of GHG emissions from Korean fisheries.

본 연구에서는 겨울철 특별관측기간(2012년 1월 5일에서 2월 29일)동안 강원지방기상청에 설치된 GPS 자료를 이용하여 가강수량을 산정하고 이를 라디오존데 가강수량 자료와 비교 분석하였다. GPS 자료를 후처리하기 위하여 Bernese 5.0 소프트웨어를 사용하였다. GANG 단독측위와 GANG, DAEJ의 비교적 짧은 거리의 두 지점만을 이용한 상대측위 결과에 따른 가강수량은 시간에 따른 변동폭이 크고 실제 환산된 가강수량에 비해 5배 정도 크게 나타났다. 이러한 대류권 절대 오차에 의한 오류를 제거하기 위한 방법으로 Xian Dao (BJFS), Ibaraki-ken (TSKB) 국제 IGS 사이트의 장거리 기선설정으로 GPS 후처리를 실시한 결과 라디오존데 관측값과 상관이 0.93, 평균편의오차가 0.67, 평균제곱근오차가 6.40 수준으로 나타났다. 또한 GPS 수신기 고도 차이로 발생할 수 있는 대류권 상대 오차를 제거하기위해 강원지방기상청과 아주 가까운 지점인 강릉 원주대학교에 설치된 GPS 자료를 추가하여 후처리한 결과 상관이 0.93, 평균편의오차가 0.61, 평균제곱근오차가 5.79로 보다 개선된 결과를 보였다.