This paper investigated impact resistance capacity and failure mode of strengthened column with PROTECT (Poly-Resilience-Oriented hybrid TEChnology plaTe) panel by analytical study. PROTECT panel is the composite panel with two steel plates and nano-composite. In order to perform impact analysis, dynamic properties of concrete, steels and nano-composite were determined. Finite element analysis was performed with these properties under the drop-weight impact. From the FEA, different failure modes corresponding to different columns were derived.

This study investigates the analytical study for evaluating impact resistance capacity and failure mode of PROTECT (Poly-Resilience-Oriented hybrid TEChnology plaTe) panel. PROTECT panel is a composite panel with two steel plates and nano-composite. In order to perform impact analysis, dynamic properties of steels and nano-composite were determined. Finite element analysis is performed with these properties under the drop-weight impact. From the FEA, different failure modes corresponding to different impact energy is derived.

A Blast valve is the device that is used in the air intake and the exhaust vent of CBRN(Chemical, Biological, Radiological and Nuclear warfare) protection facility. The valve is automatically closed when explosion pressure is applied from the outside of equipment. This study is investigated on the structural design and the performance of blast valve. After modeling the entire of blast valve and spring assembly, the data for the spring parameter is obtained through the finite element method and the operating limits of the valve are derived. Also, a prototype is made to determine the relationship between the load and the opening closing amount of valve through the load cell test. The performance of prototype at analysis as blast valve is agreed well with that at experiment. It is verified that the blast valve proposed in this paper is designed with the structure to endure the explosion pressure.

In this paper, a finite element dynamic simulation study was performed to gain an insight about the blast wall test details for the offshore structures. The simulation was verified using qualitative and quantitative comparisons for different materials. Based on in-depth examination of blast simulation recordings, dynamic behaviors occurred in the blast wall against the explosion are determined. Subsequent simulation results present that the blast wall made of high energy absorbing high manganese steel performs much better in the shock absorption. In this paper, the existing finite element shock analysis using the LS-DYNA program is further extended to study the blast wave response of the corrugated blast wall made of the high manganese steel considering strain rate effects. The numerical results for various parameters are verified by comparing different material models with dynamic effects occurred in the blast wall from the explosive simulation.

전 세계적으로 테러의 위협이 가중되고 일반 상업건축에 대한 방폭설계의 요구가 증가하고 있는 현실을 직시하여, 본 연구에서는 기본적인 방폭설계의 개념을 정립하고 실제 설계사례를 통하여 방폭성능을 평가하는데 목표를 두고 있다. 비록 지진하중과 폭파하중에는 많 은 차이점이 있지만, 그 설계법은 구조물의 소성거동을 허용하고 연성을 갖도록 설계한다는 점에서 유사하다. 본 연구에서 제시된 대상 건물에 대한 방폭성능 평가를 통하여, 일반하중에 대하여 잘 설계된 건물은 어느 정도 수준의 방폭성능을 확보하는 것으로 나타났다. 그러나 구조물에 작용하는 폭파하중은 무기의 종류, 등가의 TNT량, 폭발점에서 목표물까지의 최단거리인 촛점거리 등에 따라 달라지기 때문에 일반화하기에 는 무리가 있다. 희생구조물을 배치하거나 예상되는 폭발점에서 주요 구조부재까지의 촛점거리를 일정수준 이상으로 유지하는 건축 계획적인 노력은 건물의 방폭성능을 향상시킬 수 있는 쉽고 효과적인 방법이다.

In this study, the explosion resistance on the normal strength concrete and HPFRCC structure members were evaluated. As a result of TNT ignition test, blow out occurred in normal strength concrete structure member, but HPFRCC structure member only cracked slightly. The structure member with 180 MPa HPFRCC has excellent resistance against explosive load. Therefore, HPFRCC is considered to be applicable to national main facilities and major military facilities.

In this study, blast resistant performance of steel plate concrete (SC) and RC wall against blast load is compared. In order to quickly and easily perform the sensitivity analysis of blast response to explosion design variables, an equivalent single degree of freedom (SDOF) dynamic analysis program was developed. By analyzing more than 800 design variables, we could understand the effect of variables on blast resistant performance.

폭발사고나 테러 등이 증가함에 따라 구조물 방폭성능의 요구가 증가되고 있다. 국내에서도 폭발사고 등에 대비하기 위한 방폭구조물의 수요가 증가할 것이며, 이를 위해서는 다양한 측면의 관련 연구가 수행되어야 할 것이다. 본 연구에서는 철근상세가 보-기둥 접합부의 방폭성능에 미치는 영향에 대해 분석하였다. 표준 시험체는 보-기둥 설계매뉴얼을 바탕으로 정하중에 대해 설계되었으며 이 외에 철근상세에 따른 영향을 분석하기 위해 휨, 전단, Diagonal철근 등이 보강된 시험체와 비교하였다. 접합부의 방폭성능을 평가하기 위해 유한요소해석 프로그램인 LS-DYNA에 의한 해석적 연구가 수행되었다. 해석결과는 시험체의 파괴형상, 변형, 지점회전각 그리고 철근의 응력을 포함하고 있다. 추가적인 휨철근이 보강된 시험체의 방폭성능을 표준 시험체와 비교하여 큰 차이를 보이지 않았으나, Diagonal 철근이 보강된 시험체는 보 영역에서 발생하는 소성힌지영역을 이동시켜 접합부의 안전성을 확보하는 등 방폭성능을 향상시켰다. 따라서 동일한 철근비에서 휨철근보다 Diagonal철근이 폭발하중에 더 효율적으로 저항하는 것을 확인하였다. 이에 더하여 전단철근이 배근된 시험체는 우수한 방폭성능을 보였으며, 이를 통해 폭발하중을 받는 콘크리트 구조에서 휨 성능과 함께 전단성능 역시 중요한 고려사항임을 확인할 수 있었다.

Based on the analysis and test of concrete box structure under blast load, it was found that the blast retrofit by Kevlar/glass hybrid fabric sheet was more effective than retrofit by Carbon fiber reinforced plastic sheet to improve the structural performance of concrete subjected to blast pressure.