As aerial application increasing, with social concerning in pesticide drift rises, so this study attempts to establish a test bench that can repeatedly and continuously evaluate this. To this end, this study first analyze ISO 22866 and ASABE S561.1 among the international standard test methods related to pesticide fugitive evaluation. A test bench was established at the Naju practice field of Chonnam National University in accordance with international standards, and field tests were carried out (ISO 22866, ASABE S561.1) to verify effectiveness. A test bench that established in this study and a pesticide drift recovery protocol by aerial application can improve the experimental environment where field experiments were complex and it was difficult to achieve the same conditions. In addition, it will be possible to construct a database of pesticide drift that takes into account various factors that affect pesticide drift substances, which is expected to improve the reliability of the data, as well as quantitative evaluation of pesticide drift in the air.

PURPOSES : This study predicts the concentration of suspended road dust (PM10) by analyzing meteorological, traffic, and atmospheric environmental data acquired at various angles, and attains a comprehensive understanding of the influencing factors of suspended road dust. METHODS : Experimental field methods were applied and statistical analyses were conducted. Field experiments were conducted using a vehicle-based measurement of suspended dust (PM10) to measure its concentration at the measurement site while maintaining a constant driving vehicular speed. Statistical analysis demonstrated the effects of the concentration of suspended dust on changes in meteorological and environmental factors and lanes per traffic volume at the time of measurement. Finally, a multiple linear regression model was applied to identify the factors which affected the generation of suspended dust. RESULTS : The analysis of suspended road dust concentrations according to the lanes per traffic volume and environmental factors showed that suspended dust concentrations increased at increasing driving speeds. In addition, the background concentration at the monitoring station was higher at high-wind speeds (>3.0 m/s) than at low-wind speeds (<1.6 m/s), but the suspended dust concentrations were higher at low-wind speeds. During the temperature inversion period from evening to morning, the suspended effects of traffic and meteorological factors were greater than the background concentration at the station. Multiple linear regression analysis showed that excluding yellow-dust days, which are known to affect atmospheric pollution levels, the accuracy of the model improved and resulted in increases in background PM10, vapor pressure, sea-level pressure, visibility, after-rainfall time, and in decreases in insolation and precipitation during low-wind speed conditions. CONCLUSIONS : At low-wind speeds, 5 days after rain, and when the relative humidity was higher than 72%, suspended dust was found to be higher than atmospheric PM10 concentration and may increase at increasing driving speeds and section lane traffic volumes. However, the volume of measured data in this study is limited to determining the patterns of suspended dust, as the silt loading of the operational road or the effects of prominent variables were not considered in this study. However, we identified prominent factors related to road-suspended dust for real-time road-dust predictions.

With rising concerns about pesticide spray drift by aerial application, this study attempt to evaluate aerodynamic property and collection efficiency of spray drift according to the leaf area index (LAI) of crop for preventing undesirable pesticide contamination by the spray-drift tunnel experiment. The collection efficiency of the plant with ‘Low’ LAI was measured at 16.13% at a wind speed of 1 m·s-1. As the wind speed increased to 2 m·s-1, the collection efficiency of plant with the same LAI level increased 1.80 times higher to 29.06%. For the ‘Medium’ level LAI, the collection efficiency was 24.42% and 43.06% at wind speed of 1 m·s-1 and 2 m·s-1, respectively. For the ‘High’ level LAI, it also increased 1.24 times higher as the wind speed increased. The measured results indicated that the collection of spray droplets by leaves were increased with LAI and wind speed. This also implied that dense leaves would have more advantages for preventing the drift of airborne spray droplets. Aerodynamic properties also tended to increase as the LAI increased, and the regression analysis of quadric equation and power law equation showed high explanatory of 0.96－0.99.

PURPOSES : This study describes the experimental findings on the mechanical properties of calcium aluminate cement (CAC)-based repair mortars with or without natural cellulose fiber (NCF). Additionally, the effect of adding NCF to the reduction of fugitive dust in the CAC powder was examined. METHODS : To produce mortar, four different levels of NCF (0.0.5, 1.0, and 2.0% by binder weight) were adopted, and the water-binder ratio was fixed at 0.485. The flow, strength characteristics, absorption, and surface electrical resistivity of the mortars were measured at predetermined periods. Additionally, SEM observations were performed to examine the microstructural changes and hydrates formed on the 28 day-mortar samples. RESULTS : The addition of NCF led to a decrease in fugitive dust. Regarding the mechanical properties of the mortars, that with 0.5% NCF exhibited a better performance in terms of strength development and surface electric resistivity compared to those of other mortars. However, the addition of NCF was less effective in the enhancement of the absorption of mortars. Further, we discovered that the microstructures of the mortars with additional NCF were comparatively dense compared to those without NCF. CONCLUSIONS : The appropriate addition of NCF can enhance the performance of CAC-based repair materials. However, further studies on the durability of CAC with the addition of NCF are needed to determine the optimal mixture.

PURPOSES : The objective of this study was to evaluate the effectiveness of dust removal by dust removal vehicles by the measuring dust load and PM10 concentrations on the sidewalks of block pavements. METHODS : Field experiments were conducted to determine a dust removal method suitable for the sidewalk conditions, as identified through a literature review. Data collection was followed by the evaluation of the sidewalk dust load with removal vehicles and analysis of the PM10 content within a service road. Moreover, an economic analysis was conducted based on the social costs of dust reduction. RESULTS : When cleaning a sidewalk block by spraying water, the contaminants in small gaps in the block pavement could be reduced, providing a potential solution to void clogging. The dust on the surface of the sidewalk was suspended from a paved road with a high level of traffic volume. Using sidewalk dust removal vehicles with sweeping, spraying water, and inhalation reduced the dust load and PM10 contents by more than 2 and 0.07g/m2, respectively. CONCLUSIONS : According to the economic analysis of the development of dust removal vehicles for sidewalks, the cost-benefit analysis method shows an input effect of 0.4, but if the reduction amount of fine particles such as PM2.5, further experiments are necessary to address the atmospheric fine dust concentrations resulting from cleaning sidewalk block pavements.

본 연구는 비산소 분쇄 및 포장이 해조류 분말의 색도, 항산화활성 및 미생물 수에 미치는 영향을 조사하였다. 대조구로는 산소 조건하에서 분쇄 및 포장을 진행하였다. 색도는 대조구가 저장기간이 지남에 따라 L값과 b값은 감소하고 a값이 증가하여 갈변현상이 일어나는 것을 확인하였다. 또한, 총 페놀함량 (9.8~8.0mg GAE/100g dw), DPPH (12.57~11.00mg BHAE/100g dw), ABTS (13~8.4mg AAE/100g dw) 및 FRAP (11.2~8.0mg Fe(II)/100g dw)활성이 모두 감소하는 것으로 나타났다. 반면에, 진공-질소치환에 의한 비산소 분쇄 및 포장의 경우 유의적으로 차이가 없는 것으로 나타났다. 미생물수는 대장균군, 일반세균수, 효모 및 곰팡이를 분석하였고 대장균군과 곰팡이는 모든 샘플에서 불검출되었다. 대조구는 0~8주차에서 일반세균수와 효모가 각각 1.52~1.96 log CFU/g, 0~1.77 log CFU/g으로 증가하는 것으로 나타났다. 비산소 분쇄 및 포장 조건은 0~8주차에서 일반세균수와 효모가 각각 1.52~1.53 log CFU/g, 0~1.25 log CFU/g으로 각각 나타나 일반세균수는 유의적으로 차이가 없었으나 효모는 약간 증가한 것으로 나타났다. 따라서, 색도유지, 높은 총 페놀함량 및 항산화 활성 유지, 일반세균 및 효모의 성장 억제를 위해서는 진공-질소치환에 의한 비산소 분쇄 및 포장 조건하에서 품질특성과 미생물수를 유지하는데 효과적일 것으로 판단된다.

PURPOSES : The objective of this study is to evaluate the effectiveness of spraying dust suppressants in relation to the condition of road pavement in South Korea and to develop an optimal management method by continuously measuring re-suspended dust concentrations using a vehicle-based measurement. METHODS : Indoor experiments were conducted to select suppressants suitable for local conditions to reduce reducing road dust, which were identified through literature review. Data collection followed the evaluation method by selecting a section sprayed with dust suppressants and a non-sprayed section within the service road. RESULTS : The BPT experiment is designed to ensure the skid resistance of the road when dust suppressants are sprayed on the road. The Environmental toxic tests for PM10, HCHO, and TVOC all met the daily indoor air quality standards recommended in Korea for determining stability. Comparison of PM10 contents before and after spraying of the test road with dust suppressants and the non-sprayed section, it was confirmed that the dust suspended by the external environment may be reduced, but the amount of dust remaining on the road may increase. After 4 hours, when the water had evaporated, the dust suppressants remained effective and lasted for two-days. CONCLUSIONS : The concentration of fine dust in South Korea varies with the average duration of highly concentrated fine dust being 26.5 h nationwide, 20.5 h in the Seoul metropolitan area, and 25.1 h in Gyeonggi-province, suggesting a duration of one to two days. Thus, the fine dust problem can be solved by using dust suppressants.

국내 농업 분야 비산먼지의 배출계수와 활동도 자료는 국내의 환경조건(풍속, 습도 등)과 농업 의 특성을 반영하지 않고 미국의 인벤토리 체계를 그대로 적용해 왔다. 이 연구에서는, 활동 자료 중 하나 인 시간 해상도는 풍속 및 건기일수 적용을 통해 월별 배분계수를 도출하여 지역별로 시간 해상도를 향상 시켰고, 공간 해상도는 시·군·구에서 동과 리로 세분화하여 지역별로 공간 해상도를 향상시켰다. 이 연구를 통해, 지금 존재하는 농업분야의 비산먼지의 배출량, 활동도 자료의 개선에 중요한 자료로 활 용될 수 있을 것으로 판단된다.

PURPOSES : The purpose of this study is to measure and analyze the fugitive dust generated by each process through field tests to develop a technology to reduce fugitive dust generated during excavation-restoration work on road pavements. METHODS : The testbed was constructed based on a typical excavation-restoration construction section and comprised five sections for reproducibility and repeated measurements. The excavation-restoration work was divided into pavement cutting, pavement crushing, pavement removal, excavation, and restoration processes and fugitive dust generated by each process was measured. Fugitive dust (TSP, PM10, PM2.5, and PM1) was measured using a GRIMM particle spectrometer, which applies the principle of a light scattering spectrometer and can be measured in real-time. RESULTS : Analyses of the average mass concentration of PM10 generated by the excavation-restoration process are as follows: 1286.3 μg/m³ from pavement cutting, 246.8 μg/m³ from pavement crushing, 697.0 μg/m³ from pavement removal, 747.9 μg/m³ from excavation process, and 350.6 μg/m³ from the restoration process. In addition, the average particle size distribution of the excavationrestoration construction was in the order of PM10~PM2.5 (67 %), PM1 or less (24 %), and PM2.5~PM1 (9 %). The pavement cutting process is characterized by the emission of high concentrations of fugitive dust over a short time, compared to other processes. The pavement crushing process has the characteristic of steadily generating fugitive dust for a long period, although the emission concentration is small. CONCLUSIONS : In this study, it was found that the concentration and characteristics of fugitive dust generated during road pavement excavation-restoration works vary by process and the reduction technology for each process should be developed accordingly.

PURPOSES : The purpose of this fundamental study is to estimate the concentration of resuspended road dust in urban areas. This involves examining and measuring the factors that affect the dust concentration and measuring these factors and the concentration directly and indirectly by analyzing the factor-effect relationship of the dust in actual operation. METHODS : From the literature review, the factors that influence resuspended road dust, including traffic, environment, and weather data of roads and their relationship analysis were obtained to determine the effects of each element on resuspended road dust. The data characteristics and the quantitative changes in the factors when a high concentration of resuspended road dust is generated are analyzed for each condition. The concentrations of the resuspended dust are presented from the perspective of each factor. RESULTS : When the vehicle speed increased from 60 to 80 km/h, the measured resuspended dust concentration increased by 8㎍/m3 on the average. When the traffic was grouped, the resuspended concentration at 1200-1400 veh/h was 15.84㎍/m3 higher than that of 500-800 veh/h. A high concentration of 60㎍/m3 or more was generated in the SCL high and middle sections, and a high concentration of 10㎍/m3 or more was generated in the SCL low section. Eight cases were observed in the SCL high and middle section at an intense atmospheric wind speed of 3 m/s or more than the SCL level of zero cases. A high concentration of 89.8㎍/m3 resuspended dust was observed after 31 h of rainfall, and the dust concentration gradually decreased by over 50 h. Hence, the passing time after the rainfall, SCL and wind speed, traffic and vehicle speed, and air background (observation) concentration, all have a direct effect on the resuspended dust concentration. Atmospheric temperature and relative humidity have a significant effect on atmospheric dust concentration. CONCLUSIONS : The quantitative indicators of the factors using an estimation model of resuspended road dust in urban areas can be obtained if the conditions for high concentrations of resuspended dust are established using the quantitative relationship of the resuspended road dust factors presented in this study.

A coal dust scattered from storage and transfer facilities of coal power plant is led to a air pollution. It is difficult to reduce some scattered coal dust by used filter system such as bag filter and electric precipitator because of being scattered in the large area. The need to cut down coal dust generation has been increased as being reinforced regulation to reduce dust from coal power plant. So this is a experimental basic study which reduces coal dust generation. This study is to reduce scattering rate of the coal dust by collision and interception between fine fog droplet and coal dust particles. The reducing rate of coal dust is evaluated by droplet size of 10㎛ sprayed. It is evaluated that capture efficiency is lower as a coal dust concentration become higher. And also it is increase as droplet size is decrase and droplet density is increase. It is resulted that coal dust coefficient to optimize the fog system design is 25μg/m3/l/hr and capture efficiency of coal dust is about 80%.