This study aims to propose a simplified equation for estimating the bond strength of corroded reinforcing bars. To this end, extensive parametric analyses were performed using the detailed analysis method presented in the authors’ previous study, where a wide range of critical variables were considered, such as compressive strength of concrete, net cover thickness, and reinforcing bar diameter. The sensitivity in bond strength of the corroded reinforcing bar according to each variable was evaluated. On this basis, a simplified formula for the bond strength of the corroded reinforcing bar was derived through regression analysis. The proposed equation was rigorously tested and verified using the bond test results of corroded reinforcing bars collected from the literature. The results confirmed that the proposed equation could estimate the bond strengths of specimens with better accuracy than the existing models, providing a reliable tool for engineers and researchers. In addition, the proposed equation was used to analyze the development length required for corroded tensile reinforcement to exert its yield strength, and it showed that the cover thickness of concrete must be at least four times the diameter of the reinforcing bar to achieve the yielding strength of reinforcing bar even at a corrosion degree of more than 5.0%.

PURPOSES : The skid resistance between tires and the pavement surface is an important factor that directly affects driving safety and must be considered when evaluating the road performance. In especially wet conditions, the skid resistance of the pavement surface decreases considerably, increasing the risk of accidents. Moreover, poor drainage can lead to hydroplaning. This study aimed to develop a prediction equation for the roughness coefficient—that is, an index of frictional resistance at the interface of the water flow and surface material—to estimate the thickness of the water film in advance to prevent human and material damage. METHODS : The roughness coefficient can be changed depending on the surface material and can be calculated using Manning's theory. Here, the water level (h), which is included in the cross-sectional area and wetted perimeter calculations, can be used to calculate the roughness coefficient by using the water film thickness measurements generated after simulating specific rainfall conditions. In this study, the pavement slope, drainage path length, and mean texture depth for each concrete surface type (non-tined, and tined surfaces with 25-mm and 16-mm spacings) were used as variables. A water film thickness scale was manufactured and used to measure the water film thickness by placing it vertically on top of the pavement surface along the length of the scale protrusion. Based on the measured water film thickness, the roughness coefficient could be back-calculated by applying Manning's formula. A regression analysis was then performed to develop a prediction equation for the roughness coefficient based on the water film thickness data using the water film thickness, mean texture depth, pavement slope, and drainage path length as independent variables. RESULTS : To calculate the roughness coefficient, the results of the water film thickness measurements using rainfall simulations demonstrated that the water film thickness increased as the rainfall intensity increased under N/T, T25, and T16 conditions. Moreover, the water film thickness decreased owing to the linear increase in drainage capacity as the mean texture depth and pavement slope increased, and the shorter the drainage path length, the faster the drainage, resulting in a low water film thickness. Based on the measured water film thickness data, the roughness coefficient was calculated, and it was evident that the roughness coefficient decreased as the rainfall intensity increased. Moreover, the higher the pavement slope and the shorter the drainage path length, the faster the drainage reduced the water film thickness and increased the roughness coefficient (which is an indicator of the friction resistance). It was also evident that as the mean texture depth increased, the drainage capacity increased, which also reduced the roughness coefficient. CONCLUSIONS : As the roughness coefficient of the concrete road surface changes based on the environmental factors, road geometry, and pavement surface characteristics, we developed a prediction equation for the concrete pavement roughness coefficient that considered these factors. To validate the proposed prediction equation, a sensitivity analysis was conducted using the water film thickness prediction equation from previous studies. Existing models have limitations on the impact of the pavement type and rainfall intensity and can be biased toward underestimation; in contrast, the proposed model demonstrated a high correlation between the calculated and measured values. The water film thickness was calculated based on the road design standards in Korea—in the order of normal, caution, and danger scenarios—by using the proposed concrete pavement roughness coefficient prediction model under rainy weather conditions. Specifically, because the normal and caution stages occur before the manifestation of hydroplaning, it should be possible to prevent damage before it leads to the danger stage if it is predicted and managed in advance.

여름철은 타 계절에 비해 장마와 불안정한 대기 등으로 인하여 빗길 교통사고의 위험성이 크게 증대될 수 있으며, 최근 5년 (2018~2022)간 여름철 빗길 교통사고는 전체 빗길 교통사고의 39%를 차지할 정도로 높은 수준이다. 이러한 빗길 운전은 노면의 배수 불량 및 미끄럼 저항 감소 등으로 인하여 수막현상을 발생시키게 된다. 이에 본 연구에서는 우천 시 도로의 안전성 강화 및 사고 위 험을 최소화하기 위한 요소인 수막두께를 산정하기 위하여 Manning의 평균 유속식을 기반으로 콘크리트 노면의 조도계수 예측 모델을 개발하는 것을 목표로 하였다. 조도계수의 영향인자를 고려하기 위하여 실외 강우 모의 장비를 이용하여 콘크리트를 타설한 뒤 실험 인자로 포장 경사, 배수거리, 강우강도, 노면 조직 특성을 고려하였으며, 이 중 노면 조직 특성은 타이닝 처리를 하지 않은 구간만 고 려한 타 연구의 기존 예측 모델 단점을 보완하기 위하여 16, 25mm 간격의 타이닝 표면 처리한 구간을 추가로 고려하였다. 수막두께 측정은 측정 범위 0.3~5mm의 수막두께 측정 게이지를 제작하여 강우가 모사된 조건에서 배수 거리 1~5m 이내 지점의 노면 조직 상 단과 수면이 접하는 수직 높이를 총 3회 측정하여 평균값을 사용하였다. 실측된 수막두께 데이터베이스를 기반으로 Manning 공식을 이용하여 조도계수를 역산한 결과, 강우강도가 증가함에 따라 조도계수는 감소하였으며, 이는 강우의 증가로 인해 물의 흐름과 콘크리 트 노면 사이의 마찰 저항 감소에 기인한 것으로 판단되었다. 또한 포장 경사가 높고 배수 거리가 짧을수록 배수성이 증가하여 마찰 저항의 지표인 조도계수가 증가하는 것으로 확인되었다. 평균 조직 깊이에 따른 조도계수 영향의 경우, 평균 조직 깊이가 증가할수록 콘크리트 표면에 노출되는 표면적이 증가하여 수막두께가 얕게 생성되고, 얕은 수심으로 인해 물의 흐름 저항이 감소하여 조도계수는 감소하는 것으로 산정되었다. 이후 135개의 데이터를 종합하여 조도계수를 종속변수로 하고 강우강도, 포장경사, 배수거리, 평균 조직 깊이, 수막두께를 독립변수로 하는 회귀분석을 수행하여 조도계수 산정식을 개발하였다.

In this study, we analyzed how the revenue water ratio(RWR) is affected by changes in conditions of the water supply area, such as the ratio of aging pipes, maintenance conditions, and revenue water. As a result of analyzing the impact of pipe aging and maintenance conditions on the RWR, it was confirmed that the RWR could be decreased if the pipe replacement project to improve the aging pipe ratio was not carried out and proper maintenance costs were not secured. It was also confirmed that an increase in the revenue water could be operated to facilitate the achievement of the project’s target RWR. In contrast, a decrease in the revenue water due to a population reduction could affect the failure of the target RWR. In addition to analyzing the causes of variation in the RWR, the calculation of estimated project costs was considered by using leakage reduction instead of RWR from recent RWR improvement project cost data. From this analysis, it was reviewed whether the project costs planned to achieve the target RWR of the RWR improvement project in A city were appropriate. In conclusion, the RWR could be affected by variations in the ratio of aging pipes, maintenance conditions, and revenue water, and it was reasonable to consider not only the construction input but also the input related to RWR improvement, such as leakage reduction, when calculating the project cost.

This study was conducted to estimate the damage of Whole Crop Corn (WCC; Zea Mays L.) according to abnormal climate using machine learning as the Representative Concentration Pathway (RCP) 4.5 and present the damage through mapping. The collected WCC data was 3,232. The climate data was collected from the Korea Meteorological Administration's meteorological data open portal. The machine learning model used DeepCrossing. The damage was calculated using climate data from the automated synoptic observing system (ASOS, 95 sites) by machine learning. The calculation of damage was the difference between the dry matter yield (DMY)normal and DMYabnormal. The normal climate was set as the 40-year of climate data according to the year of WCC data (1978-2017). The level of abnormal climate by temperature and precipitation was set as RCP 4.5 standard. The DMYnormal ranged from 13,845-19,347 kg/ha. The damage of WCC which was differed depending on the region and level of abnormal climate where abnormal temperature and precipitation occurred. The damage of abnormal temperature in 2050 and 2100 ranged from -263 to 360 and -1,023 to 92 kg/ha, respectively. The damage of abnormal precipitation in 2050 and 2100 was ranged from -17 to 2 and -12 to 2 kg/ha, respectively. The maximum damage was 360 kg/ha that the abnormal temperature in 2050. As the average monthly temperature increases, the DMY of WCC tends to increase. The damage calculated through the RCP 4.5 standard was presented as a mapping using QGIS. Although this study applied the scenario in which greenhouse gas reduction was carried out, additional research needs to be conducted applying an RCP scenario in which greenhouse gas reduction is not performed.

전 세계적으로 해상을 마주하고 있는 여러 국가들은 기존의 전력 생산방식의 단점을 극복하고 해상풍력 개발을 통한 친환경에 너지자원을 활용하고 있다. 해상은 넓은 해역에 대규모 풍력단지를 개발할 수 있는 장점이 있으나 해양구조물의 설치로 인해 선박의 안 전운항이 위협받고 있다. 이에 따라, 선박 통항로와 해상풍력단지 간 상호 미치는 영향에 대해 분석하여 선박이 안전하게 운항할 수 있도 록 PIANC에서는 표준 Guideline을 제시하였다. 그럼에도 불구하고, 표준 Guideline은 모든상황에서 동일한 이격거리를 산정하였다. 따라서 본 연구에서는 선회성능, 조우상태, 환경외력, 해상밀집도, 해상풍력발전기, 항로형태 등을 요소로 반영한 선박 통항로와 해상풍력단지 간 최적의 이격거리 산정 모델을 개발하였다. 개발된 모델 검증을 위한 시뮬레이션 결과, 운항 준비상태에 따른 입지 특성별 선회성능 크기 는 산정 모델에서 제시한 크기와 유사하였다.

Although retailers deals with a large number of single-term inventory items, but few cases have been considered in the areas of practical decision making. However, recent moves to strengthen fair trade have created a real need for single-period inventory decision-making problems. This study addresses the problem of ordering quantity decisions that are expected to maximize profits using classical newsvendor models. The research target is data on seasonal and perishable products from retail. We also use data from retailers to actually apply the newsvendor model and calculate the results to compare performance. It also suggests solutions for estimating demand for products sold in order to apply newsvendor models that utilize actual demand ratio versus forecast demand. This study would like to examine the effectiveness of this research through data analysis and make some suggestions for applying it to reality.

최근 전북 지역은 바지락 생산량이 감소하여 2015년에 전국 생산량의 17.8%를 차지한 반면, 충남 지역은 점차 증가하여 49.1% 를 차지하였다. 갯벌은 다양한 저서생물이 서식하고 있고, 조석에 의해 물질이 유출·입되는 특성이 있기 때문에 만의 특성을 고려한 물질 수지를 이해하는 것이 중요하다. 본 연구에서는 2015년 5월과 8월에 곰소만과 근소만의 바지락 어장 지역과 외해지역의 차이를 비교하기 위해 3개의 해역(Sector , Sector , Control)으로 구분하고, LOICZ Model을 이용하여 물질수지를 산정하였다. 분석결과 바지락 성장이 활 발한 5월에 바지락 양식장이 밀집한 곰소만과 근소만 Sector 의 DIP는 각각 207.2 kg/day와 77.2 kg/day로 나타났고, DIN은 4,996.7 kg/day와 926.6 kg/day로 나타났다. 주로 양식생물의 섭식작용에 큰 원인으로 보이며, 근소만보다 곰소만에서 바지락 밀식이 이루어지는 것 으로 판단된다. 따라서 건강한 갯벌 생태계 유지와 지속적인 바지락 생산을 위해서는 밀식을 저감하기 위한 지속적인 관리가 필요하다.

This study concerned the analysis on the efficiency of the conversion of water tank type supply system to direct water supply system to examine the feasibility of the conversion, as well as the calculation of optimal conversion range that enables the supply of safe, high-quality water at stable pressure in accordance with the standards of water supply facility. The results of this research showed that when converting water supply system from water tank type supply system to direct water supply system, more nodal points could be properly converted and more reduction of electricity usage was expected in case water pressure rather than residence time was fixed. This means that higher efficacy can be obtained by fixing water pressure when converting water supply system. However, since the number of the locations that received on-spot inspection was small and the electricity usage measured was not exclusively by water supply facility, it is difficult to judge that such reduction of electricity usage accurately represents reduced electricity usage by water supply facility alone. therefore, after having secured on-spot information about a larger number of locations in apartment complexes that have converted water supply system, and utilizing information about electricity usage exclusively by water supply facility, the proposed method of this research could be applied to accurately deducing expected reduction of electricity usage by water supply facilities of various other apartment complexes. It is also considered possible to deduce an effective operation method of water supply system by finding out an area that shows low pressure or low residual chlorine concentration in the optimal conversion range of water supply, followed by estimating the proper location of pumping station or the proper chlorine dosage at the power purification plant that supply water to the target area.

For the asset management of a water pipe network, it would be necessary to understand the extent of the maintenance cost required for the water pipe network for the future. This study would develop a method to draw the optimum cost required for the maintenance of the water pipe network in waterworks facilities to maintain the aim revenue water ratio and to achieve the target revenue water ratio, considering the water service providers’ waterworks condition and revenue water ratio comprehensively. This study conducted a survey with 96 water service providers as of the early 2015 and developed models to estimate the optimum maintenance cost of the water pipe network, considering the characteristics of the water service providers. Since the correlation coefficient of all the developed models was higher than 0.95, it turned out that it had significant reliability, which was statistically significant. As a result of applying the developed models to the actual water service providers, it was drawn that increasing revenue water ratio to more than a certain level can reduce the maintenance cost of the water pipe network by a great deal. In other words, it is judged that it would be the most efficient to secure the reliability of waterworks management by increasing the short-term revenue water ratio to more than a certain level and gradually increase the revenue water ratio from the long-term perspective. It is expected that the proposed methodology proposed in this study and the results of the study will be used as a basic research for planning the maintenance of water pipe network or establishing a plan for waterworks facilities asset management.

본 연구에서는 BES 기법을 활용하여 온실을 대상으로 실시간 에너지교환 시뮬레이션 모델 개발 및 검증을 수행하고 냉·난방부하 산정 및 경향성을 분석하였다. 우선 BES 기법과 현장실험을 기반으로 온실의 실시간 에너지 교환 모델을 개발하였다. 광흡수율, 엽면적지수, 잎 특성 길이 등 대상작물인 애플망고의 특성 값들과 온실 내부 이산화탄소 농도, 광량, 온도 등 실시간 입력 자료를 고려하여 작물 및 토양의 에너지교환을 구현하였다. 모델의 검증은 온실 내부 기온으로 수행하였으며 실측 내부 기온과 연산된 내부 기온 간의 결정계수, 일치도로 평가 하였다. 내부 기온 비교는 결정계수 0.89, 일치도 0.93으로 높은 유사성을 확인하였으며 모델의 유의성을 판단하였다. 개발한 모델과 2005년부터 2014년까지의 기상자료, 대상작물의 생육단계별 적정생육온도를 이용하여 대상온실의 냉·난방부하 산정하였다. 연도별 냉·난방부하산정 및 경향성을 파악하였으며 최대 냉·난방부하 산정을 통하여 대상온실의 냉·난방장치 용량설계의 기초자료를 확보하였다. 최근 10년 치 기상자료를 통하여 평균 최대 난방부하 525,473 kJ·hr-1, 평균 최대냉방부하 630,870 kJ·hr-1가 산정되었으며 대상 온실에 지열, 온배수, 태양열 등 신재생에너지를 활용할 경우 유용하게 활용될 것으로 판단된다. 본 연구를 통하여 온실 내 각 구성요소 간의 실시간 에너지교환을 모의할 수 있었으며 추후 온배수 활용을 위한 저류조, 히트펌프, 축열조 등의 설비를 구현함에 따라 전반적인 냉·난방 시스템의 구현 가능성을 확인하였다. 또한 동적 해석방법을 통하여 재배작물, 생육단계 및 토양을 고려하였으며 온실 에너지교환 모델에 다양한 형태로 적용 가능할 것으로 판단된다.

해역에서의 체류시간은 제한된 영역을 채우는 수체나 오염물질이 잔류하는 시간을 의미하며, 서로 다른 수체간의 물리적 특성을 비교하는 데 사용되고 있다. 거제만으로 유입되는 육상기원 또는 양식기원 입자물질의 잔류시간을 알아보기 위해 입자추적모델이 포함된 EFDC를 이용하여 입자물질 체류시간을 계산하였다. 계산된 입자물질의 체류시간은 내만에서 약 65일이었는데, 이 결과는 거제만 내측으로 유입되는 입자물질이 외해에 도달하기까지 약 2달 이상의 시간이 소요됨을 의미한다. 이 체류시간은 거제만 전역에 걸쳐 조석의 흐름에 따라 다르게 나타났으며, 해역에 유입된 입자물질의 거동이 해역의 물리적 특성에 의해 결정됨을 의미한다. 입자물질 체류시간의 공간적인 분포특성을 통해 거제 내만의 해수교환이 원활하지 않은 것을 알 수 있으며, 이로 인해 수질오염문제에 취약할 수 있다는 것을 알 수 있다.

PURPOSES : This study is to construct the regression models of drainage asphalt concrete specimens and to provide the appropriate coefficients of hydraulic conductivity prediction models. METHODS: In terms of easy calculation of the hydraulic conductivity from porosity of asphalt concrete pavement, the estimation model of hydraulic conductivity was proposed using regression analysis. 10 specimens of drainage asphalt concrete pavement were made for measurement of the hydraulic conductivity. Hydraulic conductivity model proposed in this study was calculated by empirical model based on porosity and the grain size. In this study, it shows the compared results from permeability measured test and empirical equation, and the suitability of proposed model, using regression analysis. RESULTS: As the result of the regression analysis, the hydraulic conductivity calculated from the proposal model was similar to that resulted from permeability measured test. Also result of RMSE (Root Mean Square Error) analysis, a proposed regression model is resulted in more accurate model. CONCLUSIONS: The proposed model can be used in case of estimating the hydraulic conductivity at drainage asphalt concrete pavements in fields.

This paper proposes a computation model of the quantity supplied to optimize inventory costs for the fast fashion. The model is based on a forecasting, a store and production capacity, an assortment planning and quick response model for fast fashion retai

A prediction of construction cost in preparation for construction document is calculated in compliance with the unit cost in Public construction of korea. This eventually means that the reasonable construction cost of a building can't be determined before construction document phase cost of construction is settled and that the cost of construction is calculated inefficiently because of connection failing between cost management of detailed estimation and information. To improve those problems, therefore, Cost estimating model of structural building elements with approximate quantity survey method is suggested in this research. The model predict the amount of materials and the cost of construction on the basis of historical similar cases. In the direction of data analysis of this research, ratio statistics value is put to practical use to fit into the peculiarities of approximate estimate of each work trade on the basis of actual data amount of materials of historical cases. In addition, the construction phase is connected through the result of a approximate estimate sorted by elements, details work trade.

교통사고 위험도 지수 산정 모델의 개발은 교통사고와 사상자수의 발생률을 줄이기 위한 대책으로 도로이용자 그룹, 도로와 가로망의 구역, 인구집단 등에 대한 교통위험도를 수식 또는 모델화를 통해 사전에 적용하여 효과를 극대화하고자 한다. 국외에서는 위험도평가모형을 통해 단일로 및 교차로에 개선방안 우선순위를 선정하는 방법으로 활용하고 있으며, 국내에서도 일부 사업에 적용되어 활용하고 있는 실정이다. 하지만 모형의 독자적인 개발보다는 국외의 모형을 국내 실정에 맞도록 일부 변형하여 활용하고 있어 그 정확성에 의문이 제기되고 있다. 따라서, 본 연구에서는 춘천시의 96개의 교차로를 대상으로 교통사고 발생 현황, 기하구조, 통제방식, 교통량, 회전교통량 등을 통해 교차로 평가요소를 추출하였으며, 추출된 평가 요소들의 상관분석을 통해 최종적인 변수를 도출하였다. 최종적으로 도출된 변수를 바탕으로 신호 구분, 차로수, 교차로형태의 세변수의 선형모형 분석을 통한 분산분석 기법을 이용하여 교차로 디자인 모형을 개발하였으며, 교차로의 계층분류, 판별변수 선정을 통해 신호교차로 위험도 모형, 비신호교차로 위험도 모형을 개발하였다.

When managers predict exact construction cost at early stage and design phase, they can reduce construction cost in a more efficient way than to predict at construction stage. But present of public construction cost estimation and management almost after the construction documents design phase. Therefore, construction cost management in the early stage and schematic design phase to generally use approximate estimating is not correct. Accordingly, this study analyze problem of current cost estimating method and a concrete cost plans make using case information of actual cost to analyze in schematic design phase. Possible to check going on the suitable design, this study conducts the preliminary research for the development of cost estimating model.

비틂시험에서 전단탄성계수와 감쇠비에 상응하는 변형률 산정의 복잡성은 여러 방법에 의하여 해결되어 왔다. 특히, 수정 등가반경법은 공진주/비틂전단 시험의 모든 변형률 영역에서 변형률에 따른 등가반경비 곡선을 보다 효과적으로 나타내는데 적합하다. 감쇠비 산정시 수정 등가반경법을 쌍곡선 모델, 수정 쌍곡선 모델, 램버그오스굿 모델등에 적용시켜 보았다. 연구결과는 감쇠비 산정시 재래식 등가반경법에 의한 하나의 등가반경 수치를 사용하는 것은 적절치 않다는 것을 보여주었다. 이력감쇠뿐 아니라 미소변형률 영역에서의 흙의 감쇠 현상을 고려하기 위하여 새로운 모델이 개발되었고, 이러한 두 가지 복합감쇠에 상응하는 변형률 산정시 부가적 조정이 필요한지 검토해 보았다.