Ni-rich계 양극 소재는 낮은 가격과 높은 용량으로 인해 고용량 달성을 위한 상용화 소재로 주목받고 있지만, 이 소재의 경 우 전기화학적 불안정성으로 인한 한계를 가진다. 그래서 다양한 표면 코팅 방법을 통해 성능향상을 이루고 있지만, 성능향상이 소 재와 코팅 방법때문인지 또는 코팅 범위가 넓어진 것 때문인지는 모호하게 남아 있다. 본 연구에서는 전이금속으로 양극 활물질을 코팅할 때 전구체 코팅 범위에 따른 리튬이온배터리 전기화학 성능평가를 분석하였다. 상업용 LiNi0.8Co0.1Mn0.1O2 양극 소재 표면을 에탄올 용액에 용해된 리튬-코발트와 리튬-주석 아세테이트 전구체를 코팅하였고, 교반속도를 다르게 하여 (200 rpm 및 600 rpm) 전구체 코팅 범위를 다르게 하였다. 리튬-코발트 아세테이트 전구체의 경우 교반속도가 증가할수록 코팅 범위가 증가하였지만, 리튬 -주석 아세테이트 전구체의 경우 교반속도가 증가할수록 코팅 범위가 감소하였다. 하지만 원소의 종류에 관계없이 코팅 범위가 넓 은 경우에 상대적으로 우수한 전기화학적 성능을 나타내었다. 코팅된 양극 활물질의 물리적 특성은 SEM 및 XRD를 이용하여 분석하 였으며, 전기화학적 성능은 초기 충·방전 용량, 사이클 안정성 및 율속특성 테스트를 통해 조사하였다.

Due to the serious air pollution problem, interest in eco-friendly vehicles is increasing. Solving the problem of pollution will necessitate the securing of high energy storage technology for batteries, the driving force of eco-friendly vehicles. The reason for the continuing interest in the transition metal oxide LiMO2 as a cathode material with a layered structure is that lithium ions reveal high mobility in two-dimensional space. Therefore, it is important to investigate the effective intercalation and deintercalation pathways of Li+, which affect battery capacity, to understand the internal structure of the cathode particle and its effect on the electrochemical performance. In this study, for the cathode material, high nickel Ni0.8Co0.1Mn0.1(OH)2 precursor is synthesized by controlling the ammonia concentration. Thereafter, the shape of the primary particles of the precursor is investigated through SEM analysis; X-ray diffraction analysis is also performed. The electrochemical properties of LiNi0.8Co0.1Mn0.1O2 are evaluated after heat treatment.

Molybdenum trioxide (MoO3) is used in various applications including sensors, photocatalysts, and batteries owing to its excellent ionic conductivity and thermal properties. It can also be used as a precursor in the hydrogen reduction process to obtain molybdenum metals. Control of the parameters governing the MoO3 synthesis process is extremely important because the size and shape of MoO3 in the reduction process affect the shape, size, and crystallization of Mo metal. In this study, we fabricated MoO3 nanoparticles using a solution combustion synthesis (SCS) method that utilizes an organic additive, thereby controlling their morphology. The nucleation behavior and particle morphology were confirmed using ultraviolet-visible spectroscopy (UV-vis) and field emission scanning electron microscopy (FE-SEM). The concentration of the precursor (ammonium heptamolybdate tetrahydrate) was adjusted to be 0.1, 0.2, and 0.4 M. Depending on this concentration, different nucleation rates were obtained, thereby resulting in different particle morphologies.

PURPOSES : NOx is a particle matter precursor that is harmful to humans. Various methods of removing NOx from the air have been developed. TiO2 and activated carbon are particularly useful materials for removing NOx, and the method is known as particulate matter precursor reduction. The removal of NOx using TiO2 requires sunlight for the photocatalytic reaction, whereas activated carbon absorbs NOx particles into its pores after contact with the atmosphere. The purpose of this study is to evaluate the NOx removal efficiency of TiO2 and activated carbon applied to concrete surfaces using the penetration method. METHODS : Surface penetration agents, such as silane-siloxane and silicate, were used. Photocatalyst TiO2 and adsorbent activated carbons were selected as the materials for NOx removal. TiO2 used in this study was formed by crystal structures of anatase and rutile, and plant-type and coal-type materials were used for the activated carbon. Each surface penetration agent was mixed with each particulate matter sealer at a concentration ratio of 8:2, and the mixtures were sprayed onto the surface. The NOx removal efficiency was evaluated using NOx removal efficiency equipment fabricated in compliance with the ISO 22197-1 standard. RESULTS : Anatase TiO2 showed a maximum NOx removal efficiency of 48% when 500 g/m² was applied. However, 500 g/m² of rutile TiO2 showed a NOx removal efficiency of up to 10%. When 700 g/m² of coal-based activated carbon and plant-based activated carbon was used, NOx removal efficiencies of up to 11% and 14%, respectively, were obtained. CONCLUSIONS : Rutile TiO2, a coal-based activated carbon, and plant-based activated carbon have lower NOx removal efficiencies than anatase TiO2. A lower amount of anatase TiO2 (500 g/m²), compared to the other spraying volumes, yielded the most significant NOx removal efficiency under optimal conditions. Therefore, it is recommended that 500 g/m² of anatase TiO2 should be sprayed onto concrete structures to improve the economic and long-term performance of these structures.

PURPOSES: Nitrogen oxide (NOx) is a particulate matter precursor, which is a harmful gas contributing to air pollution and causes acid rain. The approaching methods for NOx removal from the air are the focus of numerous researchers worldwide. Titanium dioxide (TiO2) and activated carbon are particularly useful materials for NOx removal. The mechanism of NOx elimination by using TiO2 requires sunlight for a photocatalytic reaction, while activated carbon absorbs the NOx particle into the pore itself after contact with the atmosphere. The mixing method of these two materials with concrete, coating, and penetration methods on the surface is an alternative method for NOx removal. However, this mixing method is not as efficient as the coating and penetration methods because the TiO2 and the activated carbon inside the concrete cannot come in contact with sunlight and air, respectively. Hence, the coating and penetration methods may be effective solutions for directly exposing these materials to the environment. However, the coating method requires surface pretreatment, such as milling, prior to securing contact, and this may not satisfy economic considerations. Therefore, this study aims to apply TiO2 and activated carbon on the concrete surface by using the penetration method. METHODS : Surface penetrants, namely silane siloxane and silicate, were used in this study. Photocatalyst TiO2 and adsorbent activated carbons were selected. TiO2 was formed by the crystal structures of anatase and rutile, while the activated carbons were plant- and coal-type materials. Each penetrant was mixed with each particulate matter reductant. The mixtures were sprayed on the concrete surface using concentration ratios of 8:2 and 9:1. A scanning electron microscopy with energy dispersive X-ray equipment was employed to measure the penetration depth of each specimen. The optimum concentration ratio was selected based on the penetration depth. RESULTS: TiO2 and activated carbon were penetrated within 1 mm from the concrete surface. This TiO2 distribution was acceptable because TiO2 and activated carbon locate to where they can directly come in contact with sunlight and air pollutant, respectively. Infiltration to the concrete surface was easily achieved because the concrete voids were bigger than the nanosized TiO2 and microsized activated carbon. The amount of penetration for each particulate matter reductant was measured from the concrete surface to a certain depth. CONCLUSIONS : The mass ratio on the surface can be predicted from the mass ratio of the particulate matter reductant measurement distributed through the penetration depth. The optimum mass ratio was also presented. Moreover, the mixtures of TiO2 with silane siloxane and activated carbon with silicate were recommended with an 8:2 concentration ratio.

Geopolymer is an alumina silicate-based ceramic material that has good heat-resistance and fire-resistance; it can be cured at room temperature, and thus its manufacturing process is simple. Geopolymer can be used as a reinforcement or floor finish for high-speed curing applications. In this manuscript, we investigate a high-speed curing geopolymer achieved by adding calcium to augment the curing rate. Metakaolin is used as the main raw material, and aqueous solutions of KOH and K2SiO3 are used as the activators. As a result of optimizing the high bending strength as a target factor for geopolymers with SiO2 / Al2O3 ratio of 4.1 ~ 4.8, the optimum ranges of the active agent are found to be 0.1 ≤ K2O / SiO2 ≤ 0.4 and 10 ≤ H2O / K2O ≤ 32.5, and the optimum range of the curing accelerator is found to be 0.82 Ca (OH)2 / Al2O3 2.87. The maximum flexural strength is found to be 1.35 MPa at Ca (OH)2 / Al2O3 = 2.82, K2O / SiO2 = 0.3, and H2O / K2O = 11.3. The physical and thermal properties are analyzed to validate the applicability of these materials as industrial insulating parts or repairing·finishing materials in construction.

In order to develop a process for manufacturing a composite structure of an intermetallic compound foam and a hollow material, the firing and pore form of the Al-Ni precursor in a steel pipe are investigated. When the Al-Ni precursor is foamed in a hollow pipe, if the temperature distribution inside the precursor is uneven, the pore shape distribution becomes uneven. In free foaming, no anisotropy is observed in the foaming direction and the pore shape is isotropic. However, in the hollow pipe, the pipe expands in the pipe axis direction and fills the pipe. The interfacial adhesion between Al3Ni foam and steel pipe is excellent, and interfacial pore and reaction layer are not observed by SEM. In free foaming, the porosity is 90 %, but it decreases to about 80 % in the foam in the pipe. In the pipe foaming, most of the pore shape appears elongated in the pipe direction in the vicinity of the pipe, and this tendency is more remarkable when the inside pipe diameter is small. It can be seen that the pore size of the foam sample in the pipe is larger than that of free foam, because coarse pores remain after solidification of the foam because the shape of the foam is supported by the pipe. The vertical/horizontal length ratio expands along the pipe axis direction by foaming in the pipe, and therefore circularity is reduced.

Chemical vapor deposition method using CH4 gaseous hydrocarbons is generally used to synthesize large-area graphene. Studies using non-gaseous materials such as ethanol, hexane and camphor have occasionally been conducted. In this study, large-area graphene is synthesized via chemical vapor deposition using polyethylene as a carbon precursor. In particular, we used a poly glove, which is made of low-density polyethylene. The characteristics of the synthesized graphene as functions of the growth time of graphene and the temperature for vaporizing polyethylene are evaluated by optical microscopy and Raman spectroscopy. When the polyethylene vaporizing temperature is over 150 oC, large-area graphene with excellent quality is synthesized. Raman spectroscopy shows that the D peak intensity increased and the 2D peak intensity decreased with increasing growth time. The reason for this is that sp3 bonds in the graphene can form when the correct amount of carbon source is supplied. The quality of the graphene synthesized using polyethylene is similar to that of graphene synthesized using methane gas.

이전 연구에서 올레핀/파라핀 분리를 위해 poly(ethylene oxide)(PEO)/Ag nanoparicles (AgNPs)(전구체AgBF4)/pbenzoquinone (p-BQ) 복합막이 제조되었으며, 이 복합체 분리막의 성능은 100시간까지 선택도 10과 투과도 15 GPU로 유지 되는 것이 확인되었다. 하지만 전구체인 AgBF4의 가격이 고가이기 때문에, 본 연구에서는 가격 측면에서 경쟁력이 있는 AgNO3를 Ag nanoparticles의 전구체로 사용하여 실험을 진행하였다. 그 결과 이미 존재하고 있는 NO3 -가 AgNPs를 감싸고 있기 때문에 분리 성능이 나오지 않는 것으로 관찰되었다. 이번 연구에서는 AgNO3를 Ag nanoparticles의 전구체로 사용하여도 높은 성능을 내기 위해 전자수용체 7,7,8,8-tetracyanoquinodimethane (TCNQ)를 사용하여 PEO, polyvinyl alcohol (PVA), polyether block amide-1657 (PEBAX-1657) 고분자 복합막을 제조한 결과, 고분자와 전자수용체의 영향과는 무관하게 분리 성능을 내지 못하는 것으로 분석되었으며, 이는 분리성능에 전구체의 음이온이 결정적 역할을 하는 것으로 분석되었다.

올레핀/파라핀 분리를 위해 poly(ethylene oxide)(PEO)/Ag nanoparticles (AgNPs)(전구체: AgBF4)/p-benzoquinone (p-BQ) 복합막이 제조되었으며, 이 복합체 분리막의 성능은 100시간까지 선택도 10과 투과도 15 GPU로 유지되는 것이 관찰 되었다. 분리막의 성능이 100시간까지 유지할 수 있었던 이유는 p-BQ의 첨가로 인해 Ag ion이 안정적으로 Ag nanoparticles 로 형성될 수 있었을 뿐더러 전자수용체인 p-BQ으로 인해 표면이 부분 양극성화 되어 올레핀 운반체로서 역할을 성공적으로 수행한 결과라 생각되었다. 본 연구에서는 Ag nanoparticles의 전구체로 사용된 AgBF4의 가격이 고가이기 때문에 가격 측면에서 유리한 AgNO3 Ag nanoparticles의 전구체로 사용하여 실험을 진행하였다. 그 결과로서 AgNO3의 경우에는 앞선 AgBF4 과는 다르게 안정적으로 은 나노입자가 형성되지 못하고 이로 인하여 좋은 성능을 내지 못하는 것으로 분석되었다.

N-nitrosodimethylamine (NDMA) is a class of disinfection byproducts and a frequently detected nitrosamine with carcinogenic potentials. This review summarizes NDMA precursors, their formation mechanisms in chloraminated water, and mitigation strategies. Understanding the formation mechanism and characteristics of precursors is essential for developing a mitigation strategy. Dimethylamine (DMA), the most widely studied NDMA precursor, has an NDMA molar yield up to 3%. In comparison, a subset of tertiary amines, e.g., pharmaceuticals, generate up to 90% upon chloramination. Potent NDMA precursors, are characterized by their negative partial charge, low planarity values and molecular weight, and high bond length and pKa values. A nucleophilic substitution of tertiary amine on chloramine is a key reason for the high NDMA yield from the most potent NDMA precursors. The distribution and fate of NDMA in surface water, aquifers, and its formation in the distribution system can be mitigated through two strategies: (1) degrading or/removing NDMA after its formation and (2) pre-treatment of its precursor’s prior chloramination.

In this study, the compound Li3BO3 (LBO) is intended to be prepared by a polymeric complex method as a sintering aid for the densification of Li7La3Zr2O12 (LLZ) solid electrolyte. A polymeric precursor containing Li and B is heat-treated in an air atmosphere at a temperature range between 600℃ and 800℃. Instead of LBO, the compound Li2+xC1-xBxO3 (LCBO) is unexpectedly synthesized after a heat-treatment of 700℃. The effect of LCBO addition on sintering behavior and ion conductivity of LLZ is studied. It is found that the LCBO compound could lead to significant improvements in the densification and ionic conductivity of LLZ compared to pure LLZ. After sintering at 1100℃, the density of the LLZ-12wt%LBO composite is 3.72 g/cm3, with a high Li-ion conductivity of 1.18 × 10-4 Scm-1 at 28℃, while the pure LLZ specimen had a densify of 2.98 g/cm3 and Li-ion conductivity of 5.98 × 10−6 Scm-1.

PVC-g-POEM graft copolymer was synthesized for ultrafiltration (UF) membrane area and the effect of TTIP on the membranes was also explored via phase separation. Characterization was explored by FT-IR, 1H-NMR and FE-SEM and measured by cross-flow system. The interaction between copolymer and TTIP enhanced the water permeance because of increased surface pore size and porosity. Phase inversion process in 80 oC water bath resulted in decreased water permeance owing to the increased top selective layer, but increased BSA rejection. However, TTIP-treated membrane with 80 oC inversion showed decreased BSA rejection owing to TTIP dissolution in hot water. TTIP treatment and 80 oC inversion resulted in highly enhanced antifouling property. The best performance exhibited 338 LMH water permeance, 89.4% BSA rejection, and 91.9% flux ratio recovery.