PURPOSES : The purpose of this study is to confirm the thermal expansion characteristics of concrete mixed with 1% waste glass fine aggregates, which is the amount stipulated for recycled aggregates in the current quality standard. METHODS : The coefficient of thermal expansion was measured by applying AASHTOT 336-10 using a LVDT. The results measured were used as physical properties in a finite element analysis to confirm the change in tensile stress and the displacement of the right angle section of the upper slab of a concrete pavement due to admixture substitution. RESULTS : The thermal expansion coefficients of concrete based on the replacement rate of the admixture when the waste glass fine aggregates are replaced are within the range of the thermal expansion coefficients of concrete specified in the Federal Highway Administration report. As the replacement rate of the admixture increases, the thermal expansion coefficient of concrete decreases. As the thermal expansion coefficient decreases, the slab pavement curling displacement and the tensile stress of the center of the upper slab of concrete decrease. CONCLUSIONS : In the short term, the presence or absence of waste glass fine aggregates does not significantly affect the thermal expansion coefficient of concrete. However, in the long term, waste glass fine aggregates are reactive aggregates that causes ASR, which creates an expandable gel around the aggregates and results in concrete expansion. Therefore, the relationship between ASR and the thermal expansion coefficient must be analyzed in future studies.

고밀도 폐유리가 콘크리트를 포함하는 건설 재료로 사용 가능함이 밝혀짐에 따라 본 연구에서는 고밀도 폐유리를 잔골재로 적용한 RC 부재의 구조적 거동을 평가하고자 휨거동 실험을 수행하고 그 결과를 비선형 유한요소해석 결과와 비교 검토하였다. 그 결과, 고밀도 폐유 리를 잔골재로 사용하게 되면, 균열 개수가 감소하고 균열 간격 및 압괴 면적이 증가하였다. 또한, 고밀도 폐유리를 잔골재로 대체한 부재는 높은 처짐 단계에서 연성이 감소되었다. 이러한 이유로 천연골재를 사용한 부재와 동일한 방법의 해석 기법은 고밀도 폐유리를 잔골재로 대체한 부재의 휨거동에 대한 초기강성, 항복하중 및 최대하중을 제대로 예측하지 못하는 것으로 나타났으나, 압괴 진전에 따른 중립축 깊이가 감소하는 것을 해석적으로 구현하게 되면, 비선형 유한요소 해석 결과가 실험결과를 비교적 잘 예측하는 것으로 나타났다.

In this paper, the flexural behavior of RC member recycled heavy weight waste glass as fine aggregate was evaluated by finite element analysis. From the results, the analytical results do not reflect the experimental results. This is because the stress-strain curve of the concrete specimen obtained from the compression test was used as the input data for the ABAQUS. Therefore, the ABAQUS, based on the experimental results of the stress-strain relationship of concrete, predicted the load-displacement relationship without considering the reduction in load capacity.

건전자제품의 개발과 생산기술에 비교하여 폐유리의 재활용을 위한 기술개발은 상대적으로 미흡하여 자원낭비와 환경오염이 가속화되고 있다. 해외에서는 이 분야에 대한 기술개발이 활발하게 이루어지고 있으나 국내의 경우, 그 관심도가 부족하여 폐유리를 불법투기 또는 매립으로 처리하고 있는 실정이다. 폐유리는 시멘트와 수화반응시 포졸란 반응가능성이 있는 것으로 확인되어 경화 콘크리트의 물리적 성질을 향상시키고 굳지 않은 콘크리트의 레올로지 특성을 개선하여 블리딩의 저감 및 수화열 발생의 억제 등에 효과적인 것으로 보고되고 있다. 따라서 본 논문에서는 폐유리를 잔골재로 사용한 차폐콘크리트의 알칼리-실리카반응이 팽창에 미치는 영향을 분석하고 폐유리 혼입에 의한 알칼리-실리카반응의 팽창을 억제하기 위한 방안으로 적정 혼화재료를 사용하여 차폐콘크리트의 내구성능을 평가하였다.

In this paper, the flexural behaviors with substitution ratio of heavyweight waste glass are compared and evaluated in reinforced concrete members. From the results, when the heavyweight waste glass was used as the fine aggregate, the yielding load (Py) and maximum load (Pu) were less affected. However, the load capacity of the RC member was gradually reduced on the large deformed stage when all of the fine aggregate was replaced by heavyweight waste glass.

In this study, the characteristics of density and flow value of mortar substituted heavy weight waste glass were compared with the aggregate ratio. From the results, the density and flow value increase as the substitution of waste glass increase, however, it is considered that the increase of the aggregate ratio of 30% or more does not contribute to the increase of the density.

Filler material (concrete or mortar) has been used for shielding radioactive waste, however, it is proceeded out evaluation for radiation shielding performance. So, it is needed to check the property in the shielding performance. Therefore, in this paper, mechanical properties of concrete was evaluated for the applicability using heavyweight waste glass as fine aggregate of filler material. From the test results, compressive and elasticity modulus were significantly affected by substitution of heavyweight waste glass, however, it could be improved the performance by using mineral admixture as binder.

Electrical waste, such as heavy weight waste glass, has become a global concern in terms of resource recycling. At the same time, aggregate is one of the most widely used infrastructure materials, and it is being exhausted. So, in this paper, the heavy weight waste glass is considered as aggregate due to its physical characteristics and chemical composition. From the results, when the heavy weight waste glass substitution ratio increase, the compressive strength and flexural strength decreased.

In this paper, the sulfate resistance of concrete substituted the crushed heavy weight waste glass as fine aggregate are compared and evaluated. From the results, when heavy weight waste glass substituted ratio increase, the reduction rate of compressive strength is decreased. So, the sulfate resistance is improved by using heavy weight waste glass in concrete.

It is necessary to investigate the possibility of high density material as an ingredient in the manufacturing of radiation shielding material. In this study, the suitability of heavy weight waste glass as a shielding material is considered. From the results, it was found that when the heavy weight waste glass substitution ratio increases, radiation shielding performance also increase.

In this paper, the flexural behavior of RC member recycled heavy weight waste glass as fine aggregate was evaluated by finite element analysis. From the results, yield point and maximum load decreased with decreasing concrete strength and elastic modulus. Also, the finite element analysis program does not reflect the ductility loss of RC members using heavy weight waste glass as fine aggregate.

In this paper, the sulfate resistance of concrete substituted the crushed heavy weight waste glass as fine aggregate are compared and evaluated. From the results, when heavy weight waste glass substituted ratio increase, the reduction rate of compressive strength is decreased. So, the sulfate resistance is improved by using heavy weight waste glass in concrete.

It is necessary to investigate the possibility of high density material as an ingredient in the manufacturing of radiation shielding material. In this study, the suitability of heavy weight waste glass as a shielding material is considered. From the results, it was found that when the heavy weight waste glass substitution ratio increases, radiation shielding performance also increase

As the industrialization is rapidly growing, the quantities of industrial waste glass have been quickly increased. However the most of them are not recycled. Therefore, it is needed to investigate the possibility of industrial waste glass as concrete material ingredient. In this paper, it is compared and evaluated that the characteristics of freeze-thaw resistance according to industrial waste glass substitution ratio in concrete specimens. From the results, the weight change was not affected by the waste glass substitution ratio. And, the relative dynamic modulus of elasticity was increased slightly with the waste glass substitution ratio. The relative dynamic modulus of elasticity was above 80% up to 300cycles in all of the mixes.

Along with the increased display devices, the supply for LCD waste glass has rapidly increased. However, there is a problem for recycling. In this study, the possibility of using LCD waste glass as a substitutive material of fine aggregate is determined and compared from the test of the compressive strength and split tensile strength. Finally, it is possible to confirm the results of the failure aspect and analysis of this test.

In this paper, the heavy metal leaching of mortar substituted the crushed waste glass as fine aggregate are evaluated. From the results, when the heavy weight waste glass substitution ratio increase, leching quantities of heavy metal is increased. Therefore, it is needed that the characteristics of heavy metal leching according to waste glass substitution ratio in mortar specimens.

As the industrialization is rapidly growing and the quantities of heavy weight waste glass have been quickly increased but the most of them are not recycled. The heavy weight waste glass have been treated by illegal dumping or being buried in landfills. And, it is caused some problem such as the environmental pollution. So, it is needed to investigate the possibility of recycling of heavy weight waste glass as concrete material ingredient. In this paper, the mechanical properties of mortar substituted the crushed waste glass as fine aggregate are evaluated. From the results, when waste glass substitution ratio increase, fluidity and specific gravity increase. However, the compressive strength and flexural strength decrease. So, the mechanical properties of mortar are significantly affected by waste glass substitution ratio.