Noise is defined as ‘unwanted sound’ or ‘undesired sound’. Recently, the aviation industry has been rapidly developing through convergence with cutting-edge technologies such as UAM. Accordingly, it is expected that new aviation industry models will continue to be created in Korea. In addition, it is expected that aircraft noise will be raised as a new social problem. The characteristic of aircraft noise is that it has a wide transmission range. Therefore, the area affected by aircraft noise is extensive, and the damage area varies depending on the flight path and flight environment. Additionally, it tends to occur continuously in certain areas. This study is an extension of the previous studies 􋺷Study on noise measurement and analysis of C172 aircraft at Muan Airport􋺸 and 􋺷Study on noise measurement and analysis of SR20􋺸, and investigated the noise characteristics of various piston engine trainer aircraft operated in Korea. We want to measure and analyze noise.

The main problem of airport noise is the impact of aircraft noise on the residents around the airport. In order to investigate the noise situation of a certain airport in South Korea, this article selects Muan Airport as the research project, selects five measurement points near the airport, takes aircraft takeoff as an example, measures the maximum noise level of each measurement point during each take off, and uses the American Airport Noise Prediction Software (AEDT 3C) to predict the noise of a single aircraft during take off, Calculate the contour area and sound exposure level data for four aircraft models. The results indicate that the average maximum noise level error between the measurement results and the simulation results is within 2dB, and the maximum noise level ranges from 65.1 to 88.1 decibels with the measurement range.

The airport is chosen as the measurement airport in this paper to investigate the noise characteristics of piston engine aircraft used for training at Muan airport. Five measurement points near the runway are chosen. The maximum noise values of piston engine aircraft (C172) and SR20 take-off processes are measured. The results show that the average maximum noise values of the five measuring points range from 66.5 dB(A) to 76.7 dB(A), with point C having the greatest noise influence. During take-off, the maximum noise of an SR20 aircraft occurs near 500Hz of low frequency.

Advancements in technology for large aircraft have led to the development of new materials for aviation. Traditional alloy-based components in aircraft, once prevalent, are now being replaced by composite materials that offer superior performance in terms of strength and operational limits. Notably, propellers have evolved from wood to composite materials, finding application in contemporary small aircraft. In this context, there is a need for research on the composite propellers of the 3-blade "W Company," based on the widely used Rotax 914 engine in South Korea. This study aims to investigate the changes in noise and thrust corresponding to variations in propeller blade angles and engine RPM, with the goal of selecting the optimal propeller pitch angle. Particularly, the "W Company's" propellers are durable and cost-effective, widely adopted in domestic aircraft. The research seeks to propose an effective method to minimize noise while maintaining the necessary thrust, contributing to the smooth operation of aircraft and promoting coexistence with local communities.

In the past, aviation technology developed from wood to alloys to composite materials. Propellers have also evolved from wood to composite materials for modern small aircraft. In this context, research is needed on a three-blade composite propeller based on the Rotax 912 engine, which is widely used in Korea. In this study, the goal is to select the optimal propeller pitch angle by investigating noise changes according to changes in blade angle and engine 4000RPM of three types of three-blade propellers different from each propeller manufacturer. By comparing the noise of the three types of propellers most commonly used in Korea and suggesting the minimum noise blade angle for each propeller, we aim to help aircraft operators select propellers and resolve noise complaints around airfields.

Aircraft noise is something humans don't want. In this study, based on the Rotax 914 engine used in Korea, the propeller blade angle was changed by 1 degree and the engine RPM was changed to review the three-wing “G Company” propeller and the three-wing GSC wooden propeller. Select the best propeller pitch angle by measuring the change in propeller noise and thrust and the change in engine RPM due to the change in noise and thrust. We would like to present a propeller pitch angle suitable for the location of the airfield and the operation of the aircraft. Based on this, we would like to help resolve noise complaints around the airfiled.

Noise is a sound that people don't want. In this study, noise is measured for SR20, a general aviation trainer used in Korea. In addition, noise measurement points are selected at Muan Airport, where most of the domestic trainers fly under the supervision of the Ministry of Land, Infrastructure and Transport, and the measured data are analyzed based on this. We also want to analyze the noise characteristics of SR20 aircraft through frequency analysis of the noise characteristics of SR20 aircraft are unique. We want to use this to understand what type of noise the trainer affects in future studies. this study will improve the reliability of the noise prediction scenario by comparing and analyzing the actual measured and predicted values when using the noise prediction program.

Most domestic pilots are trained at local airfields using propeller aircraft. Training aircraft are mainly trained in the airspace around the aerodrome, and mainly take-off and landing exercises that require a lot of practice among flight control skills. Aircraft noise is a sound that humans do not want. In this study, based on the Rotax 914 engine used in Korea, the propeller blade angle was changed by 1 degree for the 3-leaf “K company” propeller and the 3-leaf GSC wooden propeller, and the engine RPM was changed to examine the noise and thrust changes. The purpose of this study is to check whether noise and thrust loss are the least at the engine's maximum RPM, and to propose an aircraft operation plan in the noisy aerodrome area based on the values.

Noise is a sound that humans do not want. In this study, noise is measured for C172, the most frequently used general aviation trainer in Korea and abroad. In addition, in this study, noise measurement points are selected for Muan Airport, where most of the domestic training aircraft fly under the supervision of the Ministry of Land, Infrastructure and Transport. Based on this, the measured data is scaled and analyzed. In addition, we intend to analyze what characteristics C172 aircraft have unique through frequency analysis of noise of C172. Through this, it is intended to understand what type of noise training aircraft affect in future studies.

Noise is unwanted sound and nerve jarring sound or mentally and physically harmful sound to the human body. In the 20th century, the aviation industry have been comprehensive industry of all areas and humanity have been globalized, the number of aircraft operated have been increased continuously. We confirmed that the actual measured noise data was consistent with the aircraft average noise data to calculate noise maps of INM version 7.0. and based on this, the actual flight scenarios and the noise map were created. For making the noise map, we assumed that the maximum number of flight is operated.

It is important to increase the sound proof performance of building for reduction the influence of aircraft noise on the basic of actual survey of existed buildings. The purpose of this study is to propose the sound proof method about indoor noise of a movie theater due to aircraft. In this study, field measurement of aircraft noise level difference were carried out for 5 type aircraft. As the result, aircraft noise levels showed to be 83.6∼98.3dB(A) and indoor noise level were NC-50∼NC-65 over acceptable NC-30 in a movie theater. Noise reduction effect showed to be NC-15∼NC-30 in a movie theater.

This study explored measures to reduce noise applicable to Gimhae international airport centering on densely packed housing areas. Especially, as for measures to relieve noise damage on the densely packed housing areas in Gimhae-si, the noise reduction effect is expected to be doubled if the west runway (36L/18R) is used as the preferred runway for the 36 direction takeoff, as well as if the flight bypasses the densely packed housing areas by means of sophisticated navigation using the area navigation (RNAV) procedure based on performance-based navigation (PBN). Takeoff toward the south connects the flight path to the South Sea which has comparatively low noise impact, relieving noise damage on the densely packed housing areas (apartment complexes in Naeoe-dong of Gimhae-si, etc.) near the northern end of the runway. The operation of the runway displaced threshold is currently being implemented on the west runway (36L/18R) of Gimhae international airport. It has been found that swing landing in spring and summer when the wind blows from the south has a noise reduction effect on the noise sensitive areas at the side and end of the west runway (Gangdong-dong and Jukdong-dong of Gangseo-gu and Buram-dong of Gimhae-si, etc.).

This study is carried out to propose an empirical equation which can promptly predict the aircraft noise level at a specific point (a receptor) near Jeju international airport by using the information of the flight path data. For this purpose, Analyses of multiple linear regression with the slant distances (SD) calculated from the gate analyses of the flight path data, aircraft noise certification levels with unit of EPNL(effective perceived noise level) and noise levels measured at receptors are performed by SPSS package. From these regression analyses for approach and departure of aircraft, we can propose empirical equations which is statistically significant. The noise levels predicted by these empirical equations are highly correlated the measured data.

The purpose of this study is to propose an appropriate method for marking out a boundary line of area damaged by aircraft noise. In an actual situation, there are many gaps between the boundary line of aircraft noise contour and the boundary line of an occupant of a house. Three cases faced in practice are considered in this study. Case Ⅰ is considered the land number together with sub-number. The Tong and Ban (the residential district number in Korea) are considered in Case Ⅱ. In Case Ⅲ, the configuration of ground is examined. The authors expect that the authority of aviation affairs should choose one of these cases and put in force in the near future.

The purpose of this study is to propose an appropriate criterium for proper sound insulation service preventing school classrooms from aircraft noise. The guideline of noise level for school facility by Korean school health law is less than Leq 55 which is less stringent than that of other countries. It has been reported that many students are annoyed and disturbed for their works when they are exposed to the noise level over Leq 55. It is desirable to modify this guideline of indoor noise level for school classroom. The noise level of classroom of which windows are opened was measured relatively high in case the school is located at the outside of the official area damaged by aircraft noise. In order to minimize the influence of aircraft noise on the school classrooms in the vicinity of domestic airport, it is necessary to improve the present criteria of WECPNL 75 for the establishment of the area damaged by aircraft noise from WECPNL 70.