최근 총톤수 16만 톤급 이상의 대형 크루즈선이 국내 항에 정기입항하고 있다. 크루즈를 이용한 국내 관광객이 증가함에 따라 정부에서는 크루즈산업 활성화를 위해 항만기반시설 확충에 많은 노력을 하고 있다. 현재 국내 주요 항구에서 크루즈전용부두 공 사가 진행되고 있다. 그러나 국내 항만 및 어항설계기준에는 크루즈선 및 접안시설에 대한 표준제원이 제시되어있지 않다. 대상선박의 표준제원이 제시되어있지 않아 전용시설물 설계 및 인허가에 많은 어려움이 예상된다. 그래서 본 연구에서는 크루즈선에 대한 표준제 원을 제시하기 위하여 현재 운항중인 크루즈선의 톤수별 대표선형의 제원을 분석하고 PIANC 사례 및 국내 항설기준을 비교분석 하였 다. 분석결과 크루즈선은 연안여객선과 선박제원 및 선박조종성능에 차이가 있음을 알 수 있었다. 따라서 크루즈 전용시설물 설계를 위해서는 반드시 대상선박의 제원이 국내항설기준에 반드시 포함되어야 한다. 그리고 선박의 범위를 산정하기 위하여 크루즈선 평균 제원 값에 커버율(75%)을 적용하여 크루즈선 표준제원과 수역시설물에 대한 기준을 제시하였다.

The study seeks to cooperate with the investigation of a fire investigation based on public-private partnership. Fire protection systems provide a wide variety of viewpoints from the perspectives of design, construction, management, maintenance, maintenance and maintenance systems at a particular point in time, construction, management, and maintenance systems. What is controversial is that there are illegal activities such as illegal activities of the Patent Office, misconduct of construction work and unreasonable construction of construction works.As a theoretical framework, the present study identified the four key elements of a successful disaster response system : responsiveness, control, professionalism, and bias.

Current seismic design provisions such as ASCE 7-10 provide criteria for selecting ground motions for conducting response history analysis. This study is the sequel of a companion paper (I – Ground Motion Selection) for assessment of the ASCE 7-10 criteria. To assess of the ASCE 7-10 criteria, nonlinear response history analyses of twelve single degree of freedom (SDF) systems and one multi-degree of freedom (MDF) system are conducted in this study. The results show that the target seismic demands for SDF can be predicted using the mean seismic demands over seven and ten ground motions selected according to the proposed method within an error of 30% and 20%, respectively

For estimating the seismic demand of buildings, most seismic design provisions permit conducting linear and nonlinear response history analysis. In order to obtain reliable results from response history analyses, a proper selection of input ground motions is required. In this study, an accurate algorithm for selecting and scaling ground motions is proposed, which satisfies the ASCE 7-10 criteria. In the proposed algorithm, a desired number of ground motions are sequentially scaled and selected from a ground motion library without iterations.

PURPOSES : The purpose of this study is to investigate the fundamental behaviors such as stresses and deflections of the middle slab in a double-deck tunnel for the development of a middle slab design guide. METHODS : The middle slab has been divided into the following three different sections as according to its structural differences: the normal section, expansion joint section, and emergency passageway section. The normal section of middle slab represents the slab supported by brackets installed continuously along the longitudinal direction of tunnel lining. The expansion joint section refers to a discontinuity of middle slab due to the existence of a transverse expansion joint. The emergency passageway section has an empty rectangular space in the middle slab that acts as an exit in an emergency. The finite element analysis models of these three sections of middle slab have been developed to analyze their respective behaviors. RESULTS: The stresses and deflections of middle slab at the three different sections decrease as the slab thickness increases. The emergency passageway section yields the largest stresses and deflections, with the normal section yielding the smallest. CONCLUSIONS: The stress concentrations at the corners of the passageway rectangular space can be reduced by creating hunch areas at the corners. The stresses and deflections in the emergency passageway section can be significantly decreased by attaching beams under the middle slab in the passageway area.

After the Gyeong-ju 9.12 earthquake, we found the necessity of seismic design of nonstructural element is important to reduce damages in view of properties and economic losses. This study focused on the investigation of damages including both properties and human beings. It was found that most of the damages are leaking of water pipe line, rupture of glasses, spalling of roof finishing, cracks of building, and falling from roof. It was also found that the seismic design force of nonstructural elements is taking account into the natural periods, amplification factors, response modification factors to forsee inelastic behaviors. From this studies, it is recommended that more studies are necessary on the seismic design force of nonstructural element.

In the companion papers (I, II), site-specific response analyses were performed at more than 300 domestic sites and a new site classification system and design response spectra (DRS) were proposed using the results of the site-specific response analyses. In this paper, the proposed site classification system and the design response spectra are compared with those in other seismic codes and verified by different methods. Firstly, the design response spectra are compared with the design response spectra in Eurocode 8, KBC 2016 and MOCT 1997 to estimate quantitative differences and general trends. Secondly, site-specific response analyses are carried out using VS-profiles obtained using field seismic tests and the results are compared with the proposed DRS in order to reduce the uncertainty in using the SPT-N value in site-specific response analyses in the companion paper (I). In addition, site coefficients from real earthquake records measured in Korean peninsula are used to compare with the proposed site coefficients. Finally, dynamic centrifuge tests are also performed to simulate the representative Korean site conditions, such as shallow depth to bedrock and short-period amplification characteristics. The overall results showed that the proposed site classification system and design response spectra reasonably represented the site amplification characteristic of shallow bedrock condition in Korea.

In the companion paper (I – Database and Site Response Analyses), site-specific response analyses were performed at more than 300 domestic sites. In this study, a new site classification system and design response spectra are proposed using results of the site-specific response analyses. Depth to bedrock (H) and average shear wave velocity of soil above the bedrock (VS,Soil) were adopted as parameters to classify the sites into sub-categories because these two factors mostly affect site amplification, especially for shallow bedrock region. The 20 m of depth to bedrock was selected as the initial parameter for site classification based on the trend of site coefficients obtained from the site-specific response analyses. The sites having less than 20 m of depth to bedrock (H1 sites) are sub-divided into two site classes using 260 m/s of VS,Soil while the sites having greater than 20 m of depth to bedrock (H2 sites) are sub-divided into two site classes at VS,Soil equal to 180 m/s. The integration interval of 0.4 ~ 1.5 sec period range was adopted to calculate the long-period site coefficients (Fv) for reflecting the amplification characteristics of Korean geological condition. In addition, the frequency distribution of depth to bedrock reported for Korean sites was also considered in calculating the site coefficients for H2 sites to incorporate sites having greater than 30 m of depth to bedrock. The relationships between the site coefficients and rock shaking intensity were proposed and then subsequently compared with the site coefficients of similar site classes suggested in other codes.

Korea is part of a region of low to moderate seismicity located inside the Eurasian plate with bedrock located at depths less than 30 m. However, the spectral acceleration obtained from site response analyses based on the geologic conditions of inland areas of the Korean peninsula are significantly different from the current Korean seismic code. Therefore, suitable site classification scheme and design response spectra based on local site conditions in the Korean peninsula are required to produce reliable estimates of earthquake ground motion. In this study, site-specific response analyses were performed at more than 300 sites with at least 100 sites at each site categories of SC, SD, and SE as defined in the current seismic code in Korea. The process of creating a huge database of input parameters - such as shear wave velocity profiles, normalized shear modulus reduction curves, damping curves, and input earthquake motions - for site response analyses were described. The response spectra and site coefficients obtained from site response analyses were compared with those proposed for the site categories in the current code. Problems with the current seismic design code were subsequently discussed, and the development and verifications of new site classification system and corresponding design response spectra are detailed in companion papers (II-development of new site categories and design response spectra and III-Verifications)

1. 서론 최근 상온재활용 포장공법과 관련한 연구들이 국내외적으로 활발히 진행되고 있다. 그러나 배합설계 기준의 경우 각국마다 서로 다른 기준들을 제시하고 있으며, 또한 재활용 아스팔트골재의 치환율에 따른 범용적인 기준제시가 되고 있지 않다. 따라서 기존 배합설계 기준들에 대한 분석이 필요하며, 국내 요구 조건에 따른 기준제시도 필요한 현실이다. 2. 양생방법 및 양생기간 정립 본 연구에서는 기존 연구에서 제시된 배합설계 시 양생방법의 현장상황을 고려한 적용성을 고려하기 위해 아스팔트포장 내 함수비에 따른 변화를 고찰하고, 양생기간 결정을 위한 증발산 시험을 실시하였다. 또한 2일, 3일, 5일, 7일 마샬안정도(60℃ 수침)실험, 밀도 및 공극률 실험을 실시하여 양생기간별 영향 을 분석하였다. 3. 기층 상온 재활용 아스팔트 혼합물 배합설계 품질기준 검증 배합설계 특성치를 결정하기 위해 국내 가열재활용아스팔트 혼합물 지침 및 해외 상온재활용 아스팔트 포장의 문헌조사를 통하여 마샬안정도, 흐름값, 밀도, 공극률 및 ITS의 특성치 기준값 활용성을 검토하였다. 또한 기존채움재와 무기질 채움재의 고성능 기층 성능구현을 위한 역할특성을 분석하였다. 4. 결론 1. 고성능 기층 무시멘트 상온 재활용 기층포장 배합설계방법론을 정립하였고, 이를 통한 80% 치환율의 경우 배합설계 일례 결과, 개질 유화 아스팔트함량을 밀도 및 공극률을 고려하여 3% 최적 개질유화 아 스팔트 양을 결정하였다. 2. 본 연구진의 기존 제안한 40℃ 1일 양생이 꼭 필요함을 재확인하였고, 현장포설환경등과 밀도 및 공극 율을 감안하여 양생기간을 수정제안하였다. 3. 배합설계 시 재활용아스팔트골재의 입도 한계성을 확인하였으며, 신골재의 단입도 사용이 필요하며, 고성능기층을 위해 채움재 특성에 따른 증발효과와 강도증진 효과가 필요함을 알 수 있었다. 4. 본 연구결과와 기존 지침 및 문헌조사한 특성치의 기준값 선정가능성에 대한 실험을 진행하여 특성치 를 정립하였다.

In this study, Hazen-Williams C value of pipes in wide waterworks system was estimated and statistically analyzed. Hazen-Williams C value of water pipe was predicted after 20 years of service period. From the results, it was found that C value of water pipe for treated water maintained higher value of 110 after 20 years of installation. Furthermore, it was found that velocity coefficients of steel pipe for less than and more than 20 years of installation were 117.7 and 109.3, respectively. C value of ductile iron pipe for less than and more than 20 years of installation were 118.1 and 114.2, respectively. In this study, it was also found that small value of C is used in the design of water pipe system. Therefore, excessively bigger size of pipe can be determined in the design of water pipe system. From the results of present study, optimum value of C can be used to avoid the oversized design of water pipe system.