Zirconia nanoparticles were widely used as filler in order to get high refractive index layer. However, dispersion of nanoparticles is difficult due to their agglomeration in solvent. In this study, the dispersibility of the zirconia suspension is promoted by controlling the steric hindrance and electrostatic interactions through the adsorption of PEI according to alkali treatment time. Also, to induce improved dispersibility on suspension, we changed the dispersion conditions variously and fabricated an ink formulation method for the coating layer. Zirconia suspension was characterized by dynamic light scattering (DLS), Zeta potential measurement, Transmission Electron Microscope (TEM) and FT-IR. We were able to confirm that good dispersion of zirconia suspension by alkali treatment and PEI led to high refractive index.

Magnetite particles were synthesized by co-precipitation of water-soluble 밀 스케일-derived precursor by various concentrations of (0.5, 0.67, 1, 2 N) NaOH and (0.6, 0.8, 1.2, 2.4 N) NH4OH. It is theoretically known that as the concentration of the alkaline additive used in iron oxide synthesis increases, the particle size distribution of that iron oxide decreases. This trend was observed in both kind of alkaline additive used, NaOH and NH4OH. In addition, the magnetite synthesized in NaOH showed a relatively smaller particle size distribution than magnetite synthesized in NH4OH. Crystalline phase of the synthesized magnetite were determined by X-ray diffraction spectroscopy(XRD). The particles were then used as an adsorbent for phosphate(P) removal. Phosphorus adsorption was found to be more efficient in NaOH-based synthesized magnetite than the NH4OH-based magnetite.

석탄회를 NaOH로 용융시킨 후 수열 처리에 의하여 제올라이트 A를 합성하였다. NaOH/석탄회의 비, 용융 온도, NaAlO2의 첨가량, 수열 처리 온도 및 시간이 생성된 제올라이트의 종류와 결정도에 미치는 영향에 대하여 연구하였다. 결정도가 높은 제올라이트의 생성에 필요한 최적의 NaOH/석탄회의 중량비는 1.2, 최적의 용융 온도는 550℃이었다. 용융된 석탄회로부터 Si4+ 와 Al3+의 용출은 교반 시간의 영향을 받지 않았다. 생성된 제올라이트의 형태는 첨가한 NaAlO2의 영향을 받는 것으로 나타났다. 적은 양의 NaAlO2를 첨가하면 제올라이트 X가 생성되나 NaAlO2의 양이 증가하면 단일상의 제올라이트 A가 생성되었다. 수열처리 시간과 온도가 증가하면 제올라이트 A는 hydroxysodalite로 변화하였다. 승온 속도를 낮춰 반응 온도까지의 도달시간을 증가시키면 결정도가 좋은 제올라이트 A를 얻을 수 있었다.

Ti scaffolds with a three-dimensional porous structure were successfully fabricated using powder metallurgy and modified rapid prototyping (RP) process. The fabricated Ti scaffolds showed a highly porous structure with interconnected pores. The porosity and pore size of the scaffolds were in the range of 66~72% and 300~400 μm, respectively. The sintering of the fabricated scaffolds under the vacuum caused the Ti particles to bond to each other. The strength of the scaffolds depended on the layering patterns. The compressive strength of the scaffolds ranged from 15 MPa to 52 MPa according to the scaffolds' architecture. The alkali treatment of the fabricated scaffolds in an aqueous NaOH solution was shown to be effective in improving the bioactivity. The surface of the alkali-treated Ti scaffolds had a nano-sized fibre-like structure. The modified surface showed a good apatite forming ability. The apatite was formed on the surface of the alkali treated Ti scaffolds within 1 day. The thickness of the apatite increased when the soaking time in a simulated body fluid (SBF) solution increased. It is expected that the surface modification of Ti scaffolds by alkali treatment could be effective in forming apatites in vivo and can subsequently enhance bone formation.

Carbonized concrete structure becomes superannuated gradually and its accelerated subsequent deterioration process leads to corrosion of steel while it ages. Recently economical and environmental concern about remodeling such superannuated concrete, including the basic structure of concrete, has been rapidly growing. Alkali restorative, which restores alkalinity in carbonized concrete structure, is used in the field of remodeling in order to improve the property of concrete structure. There have been many different kinds of materials which restore alkalinity in carbonized concrete. They can be classified according to their structural elements. This study focuses on the alkali restorative which mainly consists of silicic lithium metallic salt while examining the durable effectiveness of the factors (such as water permeation, surface erosion, elution of alkali, etc.), which will continuously affect concrete as deteriorating factors even after the restoration of alkali. The result shows that the alkali restorative consisting mainly of silicic lithium contributes to water-resistance, surface strength, and long term durability of alkali due to water permeation in carbonized concrete.

The present study, a modified electrochemical treatment was applied to concrete to mitigate the leaching of alkali ions from concrete. The current ranged 500 mA/m2 and duration was 2weeks. Electrochemical treatment applied in concrete quantity of alkali ions leaching and the limit depth of concrete were decreased, through electrochemical treatment is very high inhibitory effect of the alkali ion is determined leaching.

밤의 효율적 박피 방법을 개발하기 위하여 산 및 알카리 처리에 의한 내피 및 외피의 박피효과를 조사하고, 밤의 형태학적, 물리적 특성을 조사하였다. 알카리 처리에 의한 밤 내피의 박피 정도는 4%, NaOH 15분 처리시 박피가 가장 잘 되었으며, 산처리에 의한 박피는 3% HCIO 농도로 5에서 30분 처리시 박피가 가장 잘 되었다. 그러나 이러한 화학적 처리시 온도가 높아지고 처리시간이 길어질수록 색상, 경도 등의 품질저하가 나타나 낮은 온도