The bentonite buffer material is a crucial component for disposing of high-level radioactive waste (HLW). Several additives have been proposed to enhance the performance of bentonite buffer materials. In this study, unconfined compression tests were conducted on bentonite mixtures as well as pure bentonite buffer material. Joomunjin and silica sands were added at a 30% ratio, and graphite was added at 3% along with bentonite. The unconfined compression strength (UCS) and elastic modulus of pure bentonite were found to be 20% to 50% higher than those of bentonite mixtures under similar dry density and water content conditions. This decrease in strength can be attributed to the reduced cross-sectional area available for bearing the applied load in the bentonitemixture. Furthermore, the 3% graphite-bentonite mixture exhibited a 10% to 30% higher UCS and elastic modulus compared to the 30% sand-bentonite mixtures. However, since the strength properties of additive-bentonite mixtures are lower than those of pure bentonite, it is essential to evaluate thermohydraulic-mechanical functional criteria when considering the use of bentonite mixtures as buffer materials.

In order to reduce the area of the high-level radioactive waste (HLW) repository, a buffer material with high thermal conductivity is required. This is because if the thermal conductivity of the buffer material is high, the distance between the disposal tunnels and the deposition holes can be reduced. Sand, which is a natural material and has higher thermal conductivity than bentonite, is added to bentonite to develop an enhanced buffer material. For the sand-bentonite mixture, it is important which sand to use and how much to add because an enhanced buffer material should satisfy both hydraulic (H) and mechanical (M) performance criteria while improving thermal conductivity (T). In this study, we would like to show what type of sand and how much sand should be added to develop an enhanced buffer material by adding sand to Gyeongju bentonite, a representative bentonite in Korea. For this purpose, the thermal conductivity, hydraulic conductivity, and swelling pressure of the sand-Gyeongju bentonite mixture according to the sand addition rate were measured. It is more efficient to use silica sand with smaller particles than Jumunjin sand which is a representative sand in Korea as an additive for an enhanced buffer material than using the Jumunjin sand. In order for the sand-Gyeongju bentonite buffer material to satisfy both the hydraulic and mechanical performance criteria as a buffer material while increasing the thermal conductivity, it is judged that the optimum dry density is 1.7 g/cm3 at least and the optimum sand addition rate is 10% at most.

The buffer block, which is one of the main components of the engineering barrier system, plays an essential role in mitigating groundwater infiltration and radionuclide transport in a high-level nuclear waste repository. To achieve those purposes, the compacted buffer block must satisfy the functional safety criteria for dry density, water content, and many other components. In this study, the compation curves of the compacted bentonite-sand mixtures were evaluated to identify the relationship between the dry density and the water content of the buffer material. The floating die press at 10 MPa and the cold isostatic press at 40 MPa were applied to compaction of a buffer block with a diameter of 100 mm and a thickness of 10 mm. The condition of a bentonite-sand mixing ratio was 6:4, 7:3, 8:2, and 9:1 with 9 to 21% water content. As a result, the maximum dry density increases, the optimum moisture content decreases as the sand content of buffer material increases. This study can provide the conditions for manufacturing the compacted bentonite-sand buffer block.

The buffer material plays a role in preventing the excessive rise in temperature generated from the high-level radioactive waste by dissipating the decay heat to the rock. For this reason, the buffer material must have thermal properties to ensure the performance of the deep geological repository. This study measured the thermal conductivity of sand-bentonite according to the mixing ratio to improve the thermal properties. The compacted buffer was manufactured with a sand-bentonite mixing ratio of 6:4, 7:3, and 8:2 with 9 to 12% water content. As a result, the thermal conductivity increases as the ratio of sand increases. As a further study, it is necessary to experiment on whether sand-bentonite’s hydraulic, mechanical, and chemical performance is suitable for the stable operation of a repository.

Increasing thermal conductivity of buffer materials makes the disposal tunnel and hole spacings in high-level radioactive waste (HLW) repositories decrease, so that the area of the HLW repository decreases, which gives more choices to choose the HLW repository site and economical cost savings to construct HLW repositories. Thus, developing enhanced buffer materials with improved thermal conductivity is needed. One of the methods to develop enhanced buffer materials is to add additives to the bentonite which is main material for buffer materials. Most additives have high thermal conductivity, but most additives do not swell or less swell than bentonite, so that the swelling pressure of the enhanced buffer materials by additives decreases compared to the swelling pressure of pure bentonite buffer materials. Swelling pressure is an important performance criterion to design buffer materials. Thus, it is important to confirm the swelling pressure of the enhanced bentonite. However, it is not simple to measure the swelling pressure of the buffer materials and furthermore, it takes several days to measure the swelling pressure of the buffer materials. For these reasons, swelling index can be considered to predict the swelling pressure of the enhanced buffer materials relatively. In this study, it was investigated through tests how the swelling index of bentonite-sand mixtures change according to the amount of sand and it was found that the linear relationship between swelling index and sand amount in the bentonite-sand mixtures.