The fuel efficiency was 16.77km/L on average for D-ENG and 12.97 km/L for B-ENG. The fuel efficiency of D-ENG was 22.66% higher than that of B-ENG. NOX had an average D-ENG of 191.75ppm and B-ENG of 104ppm. NOX of D-ENG occurred 145.76% more than B-ENG. The amount of CO2 generated was 154.25ppm for D-ENG and 199ppm for B-ENG. CO2 of D-ENG occurred 29.01% less than B-ENG. From this, it was found that the higher the fuel efficiency, the higher the emission of nitrogen oxide and the lower the emission of carbon dioxide decreased.

These days, our environmental pollution has been greatly threatened by various exhaust emissions from diesel engines for transportation, and there is a tendency that regulations on this are very strengthened. In this study, when biodiesel and water-cooled EGR are simultaneously applied to common rail diesel engines, which occupy most of passenger diesel engines, the characteristics of exhaust smoke and NOx were investigated. As a result of this experiment, as a result of applying less than 10% EGR to 5% biodiesel mixed fuel, it was found that smoke and NOx emissions can be simultaneously reduced.

In recent years, our reality is facing a serious risk of air pollution from transport vehicles. In particular, various exhaust emissions from diesel engines are pointed out as a serious cause of environmental pollution. This study attempted to study the potential of biodiesel as an alternative energy for CRDI diesel engines. When biodiesel 30% was applied, the smoke emission was reduced by 40% at 4000rpm compared to diesel. On the other hand, there was no significant difference in output, torque, and energy consumption. However, NOx emissions tended to increase compared to diesel. The applicability of biodiesel to CRDI diesel engines has been demonstrated for the characteristics of output and smoke emissions.

In this paper, we compare and analyze the injector defects of P-ENG and S-ENG with normal injectors by measuring current waveforms, voltage waveforms, exhaust gases and driving fuel economy. In the case of FTS failure, the S-ENG reduced the overall injection time by 3.7% and the main injection by 3.5% compared to the normal engines. In the case of AFS failure, the overall injection time increased by 45.7% and the main injection time increased by 24.1% compared to the normal engine. The rest data showed that fuel economy of S-ENG had 25.9% higher than P-ENG, NOX had 162.5% higher than that of P-ENG, and CO2 of S-ENG had 26.7% lower than P-ENG.

In this paper, the injectors with normal quantity, over quantity of +10%, under quantities of -10% and –30%, were mounted on S-ENG and P-ENG in order to measure the voltage energy, current energy and power supplied to the injectors and the fuel economy under several speed of rpm conditions. The voltage and current energy of S-ENG was greater than P-ENG, and the power of S-ENG was measured and analyzed 4.8 times higher than that of P-ENG at all injectors, and the tendency of carbon dioxide emissions calculated from fuel efficiency measurement results was not significantly affected by the type of injectors, but P-ENG was measured to be slightly affected by the type of injectors. It is assumed that the model year and mileage of the test vehicle affects this tendency.

Biodiesel is a remarkable alternative fuel for the diesel engine among various countries. Various studies are carried out on the environmental and economic effects as well as the nature of diesel engine fuel biodiesel in the combustion process and emission characteristics. In this study, CRDI diesel engines used diesel fuel and 20 % biodiesel blend fuel (BD 20 %) as fuel, with City-mode exceeding 300 hours. Engine performance and emissions were sampled at one-hour intervals for analysis. The engine was inspected after testing to check the engine parts (valves and injectors). It was concluded that 300 hours of operation using BD 20 % does not cause abnormal deterioration of the engine or abnormal changes in engine power and exhaust gas.

In this paper, we investigate the relationship between fuel injection quantity and voltage and current energy of Bosch system and Delphi system by measuring the high and low voltage waveform, current waveform, fuel injection quantity and fuel pressure of A and J-engines. Waveform measurements are made using the PICO scope and the CDS tester. The injectors of A and J engines were tested under no load condition using injector with normal fuel injection quantity, injector with small fuel injection quantity and injector with many fuel injection quantity. In case of normal injector, A-engine has higher fuel pressure, injection interval time, voltage energy, and current energy than J-engine. The current energy of the A-engine changed linearly compared to that of the J-engine. For over and under injectors, the change in the previous physical quantity was greater for the A-engine than for the J-engine. However, the duration time of maintaining to open the injector is controlled differently, and so the voltage and current energy values are changed, and the change of the current energy is larger than the voltage energy.

This paper investigates the relationship of voltage and current waveform between normal piezo injector and deterioration abnormal piezo injector. The experimental methods using Pico oscilloscope and GDS scan tool are employed to measure current and voltage waveform and fuel pressure of piezo injector. The experiment is carried out during no-load condition. A summary of the important results are as follows. 1) In case of normal injector, the fluctuation of duration time of piezo injector was linearly and regularly decreased with increasing engine speed, but the that of deterioration piezo injector was irregularly decreased with increasing engine speed. 2) In main injection, the peak value of the current waveform of abnormal injector was larger than that of normal injector, the duration time of deteriorated abnormal injector was less than that of normal injector at 800rpm and 1500rpm, but the duration time of deteriorated abnormal injector was larger than that of normal injector at 2000rpm and 3000rpm. This irregularity appears to be caused by the deterioration of the injector.

This study describes the effects of palm oil biodiesel (PD) blended with diesel on the combustion performance, emission characteristics and soot morphology in a 4-cylinder CRDI diesel engine. 5 kinds of fuels are used with blending as diesel/biodiesel volume ratio 0%, 10%, 20%, 30%, 100%. The engine is operated under idle speed, 750rpm and load conditions of the engine are 0 Nm and 40Nm. The Coefficient of Variation(COV) of Indicated Mean Effective Pressure(IMEP) shows that the engine operates very steadily in the idle state. But fuel consumption is increased. And Emission results show that the oxygen in biodiesel has a great influence on the production of exhaust emissions. The nitrogen oxides(NOx) is decreased because of high viscosity and low heating values of biodiesel at low blend ratio. But NOx and Carbon monoxide(CO) are increased above a certain blend ratio. Particulate matter(PM) and Hydrocarbons(HC) is decreased according to increase of blend ratio. The size of soot is decreased and the morphology of soot is developed to cluster with increasing blend ratio.

Our environment is faced with serious problems related to the air pollution from automobiles in these days. In particular, the exhaust emissions of diesel engines are recognized as main causes of the air pollution. CRDI (common rail direct injection) diesel engine is widely used for the sake of minimization on exhaust emission. Because biodiesel fuel is a renewable and alternative fuel for diesel engine, its usability is expanded. An commercial CRDI diesel engine used to commercial vehicle was fueled with diesel fuel and 5% biodiesel blended fuel (BDF 5%) with city mode in excess of 300 hours. The engine performance and exhaust emissions were sampled at 1 hour interval for analysis. To check the engine parts (valve, injector), the engine was inspected after test. It was concluded that there was no unusual deterioration of the engine, or any unusual changes in engine power and exhaust emissions in spite of operation of 300 hours with BDF 5%.

This paper investigates the relationship between the waveform area and fuel injection quantity. It is on developing on analysis method of waveform the effect of waveform area on fuel injection quantity of CRDI Diesel engine. The experimental methods using Pico oscilloscope and fuel injection tester are employed to measure current and voltage waveform and fuel injection quantity of solenoid injector. The one normal and two abnormal solenoid injectors are used. The experiment is carried out during no-load condition. A summary of the important results are as follows. 1) The area of the voltage and current waveform of the abnormal injector becomes larger than the that of normal injector, and the area of the current and voltage waveform is inversely proportional to the fuel injection quantity. 2) The area of the current waveform can be obtained more accurate results than that of voltage waveform. 3) It is possible to infer the fuel injection quantity by measuring the current waveform and calculating the area.

In this paper, we investigate the trend of injector waveform change due to failure of air flow sensor and intake air temperature sensor of CRDI engine. Changes in the injector opening time can be detected by the failure of the associated sensor, and the extension of the reaction time is closely related to fuel consumption. Thus, the proper maintenance time of the vehicle will affect the fuel economy and reduce the exhaust gas.