This study compared and analyzed the difference in performance between the existing soot probe and the improved one that was applied to the actual inspection vehicle at the actual inspection site, which has been developed under the specific conditions based on the excellent results through the performance evaluation. As the results, probe(b) involves a structure designed close to the center of the circumference of the exhaust pipe, and the suction efficiency was improved by adding a center unit. The improved probe(b) can enhance the effectiveness of the inspection when applied to total and regular tests inspections, and the possibility of contributing to the reduction of carbon dioxide emissions generated in the transportation sector has been confirmed.

In this paper, we compare and analyze the injector defects of P-ENG and S-ENG with normal injectors by measuring current waveforms, voltage waveforms, exhaust gases and driving fuel economy. In the case of FTS failure, the S-ENG reduced the overall injection time by 3.7% and the main injection by 3.5% compared to the normal engines. In the case of AFS failure, the overall injection time increased by 45.7% and the main injection time increased by 24.1% compared to the normal engine. The rest data showed that fuel economy of S-ENG had 25.9% higher than P-ENG, NOX had 162.5% higher than that of P-ENG, and CO2 of S-ENG had 26.7% lower than P-ENG.

In this paper, the injectors with normal quantity, over quantity of +10%, under quantities of -10% and –30%, were mounted on S-ENG and P-ENG in order to measure the voltage energy, current energy and power supplied to the injectors and the fuel economy under several speed of rpm conditions. The voltage and current energy of S-ENG was greater than P-ENG, and the power of S-ENG was measured and analyzed 4.8 times higher than that of P-ENG at all injectors, and the tendency of carbon dioxide emissions calculated from fuel efficiency measurement results was not significantly affected by the type of injectors, but P-ENG was measured to be slightly affected by the type of injectors. It is assumed that the model year and mileage of the test vehicle affects this tendency.

점차 강화되는 배출가스 규제와 적은 연료로 많은 거리를 주행할 수 있는 고효율 자동차에 대한 요구로 에너지소비효율에 대한 관심이 점차 늘어나고 있다. 국내의 에너지소비효율은 도심주행모드와 고속도로 모드를 주행하여 복합연비로 산정하고 5-Cycle 보정식을 이용하여 최종 에너지소비효율을 표시하고 있다. 에너지소비효율의 경우 카본발란스법에 의하여 산출되는데 이때 배출가스에 의해 계산이 됨에 따라 연소에 사용되는 연료는 자동차 성능과 에너지소비효율에 매우 중요한 역할을 하게 된다. 자동차 연료의 경우 국내에서는 석유 및 석유대체연료 사업법 품질기준에 따라 국내에 유통되고 있는데 정유사의 정제 방법이나 원유에 따라 품질 기준 내에서 물성 차이를 보일 수 있다. 일정 품질기준을 정하고 있음에 따라 연료별 큰 차이는 나지 않을 것으로 보이나 자동차의 성능에는 영향을 미칠 수 있어 그에 따른 연구가 필요한 실정이다. 따라서, 본 연구에서는 시중에서 유통되고 있는 연료 중 여름철에 판매되는 경유를 정유사 직영점을 통해 구매하였으며, 각 시료별 물성을 분석하고 그에 따른 에너지소비효율을 측정하였다. 에너지소비효율의 경우 현행 경유 자동차의 에너지소비효율 산정식과 휘발유 에너지소비효율에서 사용되는 산출식을 이용하여 물성 적용에 따른 변화를 살펴보았다. 그 결과 시료별 밀도는 최대 약 0.9%의 차이를 보였으며, 순발열량은 1.6%의 차이를 보였으며, 현행 에너지소비효율 산출 결과에서는 도심모드에서 약 1%, 고속모드에서 1.4% 차이를 보였다. 휘발유 산출식을 이용한 산출에서는 현행 에너지소비효율 산출때 보다 약 6%정도 낮은 수치를 보였으며, 각 시료별 에너지소비효율은 최대 도심과 고속에서 최대 약 1.4%의 차이를 보였다.

2016년 기준 국내 자동차 등록대수는 약 2,200만대를 육박하고 있으나[1], 국내 자동차용 표준 연료에 대한 기준은 부재한 상황이다. 자동차용 표준연료(Reference Fuel)는 차량의 연비와 배출가스를 인증하거나 새로운 자동차를 개발할 때 차량의 성능 등을 평가하기 위해 사용하는 연료를 의미한다. 현재 국내에는 차량의 배출가스, 성능, 연비시험 등을 위해 유통연료를 사용하고 있으며, 유통연료는 석유 및 석유대체연료사업법과 대기환경보전법상의 품질기준을 만족하지만 각 제조사의 원료와 공정 등에 따라 연료의 물성 차이가 있어 차량 시험 시 편차가 발생할 수 있다. 본 연구에서는 국내 유통되는 자동차용 경유 품질모니터링 분석결과를 바탕으로 자동차용 경유의 시험용 표준연료 기준(안)을 설정하고, CRDI 방식의 차량에 적용하여 표준연료 기준(안)을 평가하였다.

The several experiments of Diesel vehicles using EFT were completed. The experiments were performed on chassis dynamometer and road driving test using test mode such as FTP-75 and LA-4. The experiments were employed to measure the effect eco-friendly EFT additives on exhaust emissions and fuel consumption efficiency. In this experiment, the following results are obtained by analyzing the data relativity between exhaust emissions and EFT additives. The value of exhaust emissions such as NOX, SOX, CO2 and PM were improved as Diesel mixed EFT additives at th ratio of 200:1. The improvement of resulting data value was best PM, NOX, SOX, CO₂and fuel consumption rate in the order named.

Emission reduction program for in-use diesel vehicles(ERPDV) has been enacted since 2004 over the Seoul metropolitan area, and diesel emission reduction is forced to fulfill this regulation. This study was performed to evaluate the ERPDV using PM10 concentrations of both road-side monitoring and national background network during the period of 2004-2010. In order to assess the pure road emission, we first eliminated the long range transport effect by deducting the trend of annual national background concentrations from the road-side PM10 concentrations, and then analyzed the time series of the resultant PM10 concentrations over Seoul metropolitan area. The annual rates of variations of road-side PM10 with the deduction of trend of background level show -3.2, +0.4, and -2.4㎍/㎥/year, in Seoul, Incheon, and Gyonggi province, respectively. There are steadily decreasing trend in Seoul with all of statistic parameters such as mean, mediam, 5%ile, 10%ile, 25%ile, 75%ile, 90%ile, and 95%ile concentrations. Incheon shows some fluctuations with positive with no significant trend, and Gyonggi province shows overall decreasing but not consistent. Student-t test shows 95% significant level of ERPDV effect in Seoul, but there exists no significant level greater than 90% in both Incheon, and Kyonggi province. Total annual averaged trend over the whole Seoul metropolitan area is estimated to lie in approximately -2.9㎍/㎥/year in this study, implying the intimate involvement of ERPDV to a large extent. This is also suggesting that the further research cost-effectiveness of ERPDV with consideration of the long range transport process would be needed over the Seoul metropolitan area.