Cu2+/polyacrylonitrile composite fibers were prepared by electrospinning, and then Cu/carbon nanofibers (denoted as Cu/ CNF-X; X = Cu content, 0, 3, or 5 wt%) were formed by calcining them. The effects of Cu2+ content and carbonization temperature on the conductivity and electrothermal conversion of Cu/CNF-X were investigated. The results revealed that the conductivity and electrothermal properties of Cu/CNF-X improve with the increase in the Cu2+ content and carbonization temperature. When the carbonization temperature was 800, 900, or 1000 °C, the conductivity of Cu/CNF-5 (0.08, 0.68, or 2.48 S/cm, respectively) increased to 1.6, 1.5, or 1.6 times that of Cu/CNF-0, respectively. The highest instantaneous surface temperatures of Cu/CNF-5 calcined at 800, 900, and 1000 °C (36, 145, and 270.2 °C, respectively) increased by 4, 25.5, and 44.6 °C, respectively, compared with those of the corresponding Cu/CNF-0 samples (32, 120.3, and 225.6 °C, respectively). Thus, the addition of a small amount of Cu2+ effectively improved the conductivity and electrothermal conversion performance of Cu/CNF-X, which has potential application value in industrial products in the future.

With the increasing demand for electronic products, the amount of multilayer ceramic capacitor (MLCC) waste has also increased. Recycling technology has recently gained attention because it can simultaneously address raw material supply and waste disposal issues. However, research on recovering valuable metals from MLCCs and converting the recovered metals into high-value-added materials remains insufficient. Herein, we describe an electrospinning (E-spinning) process to recover nickel from MLCCs and modulate the morphology of the recovered nickel oxide particles. The nickel oxalate powder was recovered using organic acid leaching and precipitation. Nickel oxide nanoparticles were prepared via heat treatment and ultrasonic milling. A mixture of nickel oxide particles and polyvinylpyrrolidone (PVP) was used as the E-spinning solution. A PVP/NiO nanowire composite was fabricated via Espinning, and a nickel oxide nanowire with a network structure was manufactured through calcination. The nanowire diameters and morphologies are discussed based on the nickel oxide content in the E-spinning solution.

Transition-metal phosphides (TMPs), a promising anode material for lithium-ion batteries (LIBs), are limited in application because of its serious volume effect in the cycle. In this work, a simple electrospinning strategy was proposed to restrict the grain size of CoP nanocrystals by nano-confined effect of carbon nanofibers with ligands. The addition of ligands not only could realize the uniform dispersion of CoP nanocrystals, but also strengthen the bond between the metals and carbon nanofibers. As a result, the CoP/CNF composite exhibits excellent lithium storage performance, and its reversible specific capacity could reach 1016.4 mAh g− 1 after 200 cycles at a current density of 200 mA g− 1. The research is anticipated to provide a new idea for the preparation of anode materials for lithium ion batteries.

본 연구는 나노섬유를 제조하는데 빠르고 효과적인 전기방사법을 이용하여 PVA(Polyvinyl alcohol)와 AgNO3를 혼합하여 제조한 용액을 금속산화물 기반 나노 섬유로 이루어진 투명 전극을 제조하고 그 특성을 분석하였다. PVA/AgNO3 혼합 용액을 전기방사법을 이용하여 유리기판 위에 나노 섬유 구조체 형태로 방사하여 250 ℃에서 2 시간 동안 열처리 과정을 통해 전기 전도성이 향상된 은 나노 섬유 기반 투명 전극을 제조하였다. 제조된 투명전극은 four-point probe 장비를 이용하여 전기적 특성을 분석하였으며, UV - Vis spectrophotometer 를 이용하여 제조된 투명전극의 투과도를 확인하였다. 또한, Scanning Electron Microscopy (SEM)과 Energy Dispersive Spectrometer(EDS)를 통해 은 나노 섬유의 표면 특성과 성분을 확인하였다. 이러한 분석들을 통해, 전기 방사 시간에 따른 면 저항과 투과도의 최적화된 조건을 확인할 수 있었으며, 은 나노 섬유로 이루어진 투명 전극은 전기적, 광학적, 기계적 특성이 우수하여 태양전지, 디스플레이, 터치스크린과 같은 차세대 유연 디스플레이에 적용 가능성을 보여주었다.

Energy storage systems should address issues such as power fluctuations and rapid charge-discharge; to meet this requirement, CoFe2O4 (CFO) spinel nanoparticles with a suitable electrical conductivity and various redox states are synthesized and used as electrode materials for supercapacitors. In particular, CFO electrodes combined with carbon nanofibers (CNFs) can provide long-term cycling stability by fabricating binder-free three-dimensional electrodes. In this study, CFO-decorated CNFs are prepared by electrospinning and a low-cost hydrothermal method. The effects of heat treatment, such as the activation of CNFs (ACNFs) and calcination of CFO-decorated CNFs (C-CFO/ACNFs), are investigated. The C-CFO/ACNF electrode exhibits a high specific capacitance of 142.9 F/g at a scan rate of 5 mV/s and superior rate capability of 77.6% capacitance retention at a high scan rate of 500 mV/s. This electrode also achieves the lowest charge transfer resistance of 0.0063 Ω and excellent cycling stability (93.5% retention after 5,000 cycles) because of the improved ion conductivity by pathway formation and structural stability. The results of our work are expected to open a new route for manufacturing hybrid capacitor electrodes containing the C-CFO/ACNF electrode that can be easily prepared with a low-cost and simple process with enhanced electrochemical performance.

본 연구에서는 polyketone (PK)을 이용하여 전기방사 조건에 따른 섬유 형상의 특성 변화와 유수분리 가능성을 확인해 보았다. 고습과 저습 조건에서는 마이크론 직경의 섬유가 형성되었으며, 특히 고습에서는 섬유의 표면이 거칠게 변한 것이 확인되었다. 섬유 직경을 micro에서 nano로 변경하기 위하여 방사용액에 염을 추가하였으며, 그 결과 섬유 직경이 약 90% 감소하는 것을 확인할 수 있었다. 제조된 rPK-LNC와 PK-H로 유수분리 특성을 확인하기 위해 oil/water 에멀션으로 중 력 조건에서 유수분리를 진행하였으며 total organic carbon (TOC)와 탁도를 측정하여 특성을 분석하였다. 제거율 확인결과 탁도가 TOC와 동일한 경향성을 나타내는 것이 확인되었다. 따라서 본 연구에서는 고분자의 방사조건과 염의 유무에 따른 분리막의 섬유 형상과 물리적 특성변화와 이를 이용한 유수분리 특성에 대해 연구하였다.

The (Ga1-xZnx)(N1-xOx) solid solution is attracting extensive attention for photocatalytic water splitting and wastewater treatment owing to its narrow and controllable band gap. To optimize the photocatalytic performance of the solid solution, the key points are to decrease its band gap and recombination rate. In this study, (Ga1-xZnx)(N1-xOx) nanofibers with various Zn fractions are prepared by electrospinning followed by calcination and nitridation. The effect of the composition and crystallinity of electrospun oxide nanofibers on the morphology and optical properties of the obtained solid-solution nanofibers are systematically investigated. The results show that the final shape of the (Ga1-xZnx) (N1-xOx) material is greatly affected by the crystallinity of the oxide nanofibers before nitridation. The photocatalytic properties of (Ga1-xZnx)(N1-xOx) with different Ga:Zn atomic ratios are investigated by studying the degradation of rhodamine B under visible light irradiation.

Low thermal conductivity carbon fibers from polyacrylonitrile (PAN) are currently being explored as an alternative for traditional rayon-based carbon fibers with a thermal conductivity of 4 W/m K. Compared to multiple component electrospinning, this research demonstrated another feasible way to make low thermal conductivity carbon fibrous material by electrospinning PAN followed by carbonization and alkali activation. The effects of activation condition on microstructure, pore formation, and thermal conductivity of the resultant carbon nanofibrous material were investigated. The processing-structure-thermal conductivity relationship was revealed and mechanism of thermal conductivity reduction was discussed. The overall thermal conductivity of the prepared carbon nanofibrous material is a result of combined effects from factors of carbon structure and number of pores rather than volume of pores or specific surface area. The activated carbon nanofibrous materials showed thermal conductivity as low as 0.12 W/m K, which is a reduction of ~ 99% when compared to that of solid carbon film and a reduction of ~ 95% when compared to that of carbon nanofibrous material before activation.

Magnetic 0-D Nd2Fe14B powders are successfully fabricated using 1-D Nd2Fe14B nanowire formed by an efficient and facile electrospinning process approach. The synthesized Nd-Fe-B fibers and powders are investigated for their microstructural, crystallographic, and magnetic properties according to a series of subsequent heat treatments. Each heat-treatment process leads to the removal of organic impurities and the formation of the respective oxides/composites of Nd, Fe, and B, resulting in the formation of Nd2Fe14B powders. Nd-Fe-B fibers exhibit the following magnetic properties: The coercivity (Hci) of 3260 Oe, a maximum magnetization at 3T of 109.44 emu/g, and a magnetization remanence (Mr) of 44.11 emu/g. This process easily mass produces hard magnetic Nd2Fe14B powders using a 1-D synthesis process and can be extended to the experimental design of other magnetic materials.

Volatile organic compounds (VOCs) are a source of air pollution and are harmful to both human health and the environment. In this study, we fabricated polyurethane/rare earth (PU/RE) composite nanofibrous membranes via electrospinning with the aim of removing VOCs from air. The morphological structure of PU/RE nanofibrous mats were investigated using FE-SEM, EDX, and XRD experimental analyses. A certain amount of RE (up to 50 wt% compared to PU pellets) particles could be loaded on/into PU fibers. The PU nanofiber containing 50 wt% RE powder had the smallest fiber diameter of 356 nm; it also showed the highest VOCs absorption capacity compared with other composite membranes, having an absorption capacity about 3 times greater than pure PU nanofibers. In addition, all of the PU/RE nanofibrous membranes readily absorbed styrene the most, followed by xylene, toluene, benzene and chloroform. Therefore, the PU/RE nanofibrous membrane can play an important role in removing VOCs from the air, and its development prospects are impressive because they are emerging materials.

본 연구에서는 복합막의 물성향상을 위해 clay를 도입한 polysulfone 나노섬유 복합막을 제조하였다. Polysulfone/clay 복합막은 clay가 들어간 N,N-dimethyl acetamide와 acetone 혼합용매에 polysulfone을 첨가한 후 전기방사법 을 이용하여 제조하였으며, 제조된 나노섬유 복합막은 적층수를 변화해 기공크기를 조절한 후 사용하였다. 전반적인 분리막 의 특성은 SEM, contact angle, 기공특성, tensile strength, water flux 분석을 사용하여 고찰하였다. 특히 SEM image로 clay의 도입을 확인하였으며 contact angle 측정을 통해 표면이 개질된 결과를 확인할 수 있었다. 그리고 clay의 도입량에 따른 복합 막의 기계적 물성을 확인하였다. 따라서 본 연구에서 제조된 분리막은 수처리용 분리막으로 충분히 활용 가능할 것으로 판단 된다.