Effective containment and disposal of high-level radioactive waste is critical to ensure long-term environmental and human safety. Especially bentonite, which is widely used as a buffer material due to its favorable characteristics such as swelling ability and low permeability, plays an important role in preventing the migration of radioactive waste into the surrounding environment. However, the long-term performance of bentonite buffer remains an area of ongoing investigation, with particular attention focused on erosion mechanisms induced by swelling and groundwater flow. The erosion of the bentonite buffer can significantly impact the integrity of buffer and lead to the formation of colloids, which could potentially facilitate the transport of radionuclides through groundwater. Therefore, quantification of bentonite buffer erosion based on an understanding of the underlying mechanisms and factors that influence bentonite buffer erosion, is essential for the safety assessment of high-level radioactive waste repositories. In this study, we aimed to develop a bentonite buffer erosion model using the Adaptive Processbased total system performance assessment framework for a geological disposal system (APro) proposed by the Korea Atomic Energy Research Institute (KAERI). The impact of bentonite erosion on performance assessment can be broadly divided into bentonite property degradation by the penetration of the bentonite buffer into rock fractures and the formation of pseudocolloids. To simulate this phenomenon, Two-region model based on a dynamic bentonite diffusion model is adopted, which can quantify the extent of bentonite intrusion and loss by erosion. Using this Tworegion model, a numerical model was developed to simulate the degradation of bentonite properties based on the amount of bentonite intrusion, as well as to simulate the migration of pseudocolloids in the near-field by deriving the amount of pseudocolloid production based on the loss of bentonite and the sorption rate of radionuclides. To check the applicability of the developed numerical model, preliminary analysis was performed for the effect of bentonite erosion in terms of process-based performance assessment. It is anticipated that this comprehensive model developed in this study will contribute to the accurate and reliable assessment of the long-term performance and safety of high-level radioactive waste repositories.

The compacted bentonite buffer is a key component of the engineered barrier system in deep geological repositories for high-level radioactive waste disposal. Groundwater infiltration into the deep geological repository leads to the saturation of the bentonite buffer. Bentonite saturation results in bentonite swelling, gelation and intrusion into the nearby rock discontinuities within the excavation damaged zone of the adjacent rock mass. Groundwater flow can result in the erosion and transport of bentonite colloids, resulting in bentonite mass loss which can negatively impact the long-term integrity and safety of the overall engineered barrier system. The hydro -mechanicalchemical interactions between the buffer, surrounding host rock and groundwater influence the erosion characteristics of the bentonite buffer. Hence, assessing the critical hydro-mechanicalchemical factors that negatively affect bentonite erosion is crucial for the safety design of the deep geological repository. In this study, the effects of initial bentonite density, aperture, discontinuity angle and groundwater chemistry on the erosion characteristics of Bentonil WRK are investigated via bentonite extrusion and artificial fracture experiments. Both experiments examine bentonite swelling and intrusion into simulated rock discontinuities; cylindrical holes for bentonite extrusion experiments and plane surfaces for artificial fracture experiments. Compacted bentonite blocks and bentonite pellets are manufactured using a compaction press and granulation compactor respectively and installed in the transparent extrusion cells and artificial fracture cells. The reference test condition is set to be 1.6 g/cm3 dry density and saturation using distilled water. After distilled water or solution injection, the axial and radial expansion of the bentonite specimens into the simulated rock discontinuities are monitored for one month under free swelling conditions with no groundwater flow. Subsequent flow tests are conducted using the artificial fracture cell to determine the critical flow rate for bentonite erosion. The intrusion and erosion characteristics are modelled using a modified hydro-mechanicalchemical coupled dynamic bentonite diffusion model and a fluid-based hydro-mechanical penetration model.

The presence of technological voids in deep geological repositories for high-level radioactive nuclear waste can have negative effects on the hydro-mechanical properties of the engineered barrier system when groundwater infiltrates from the surrounding rock. This study conducted hydration tests along with image acquisition and X-ray CT analysis on compacted Korean bentonite samples, which simulated technological voids filling to investigate the behavior of fracturing (piping erosion) and cracking deterioration. We utilized a dual syringe pump to inject water into a cell consisting of a bentonite block and technological voids at a consistent flow rate. The results showed that water inflow to fill technological voids led to partial hydration and self-sealing, followed by the formation of an erosional piping channel along the wetting front. After the piping channel generated, the cyclic filling-piping stage is characterized by the repetitive accumulation and drop of water pressure, accompanied by the opening and closing of piping channels. The stoppage of water inflow leads to the formation of macro- and micro cracks in bentonite due to moisture migration caused by high suction pressure. These cracks create preferential flow paths that promote longterm groundwater infiltration. The experimental test and analysis are currently ongoing. Further experiments will be conducted to investigate the effects of different dry density in bentonite, flow rate, and chemical composition of injected water.

The concept of deep geological disposal for high-level radioactive waste is based on an engineered barrier system (EBS), including a canister, bentonite buffer and backfill material. The bentonite buffer is key component of the EBS to prevent groundwater infiltration and radionuclide leakage. However, the bentonite buffer can become saturated due to groundwater flow through the excavation damaged zone in the adjacent rock, causing erosion of bentonite buffer and affecting the long-term performance of EBS. While the RH (relative humidity) sensor is commonly used to assess the degree of saturation in the bentonite buffer, it has a critical challenge due to its sensor size, which can disturb the overall integrity of the bentonite buffer during the initial installation process. In contrasts, the electrical resistivity test, widely known as a non-destructive method, is used to predict soil properties such as the degree of saturation and water contents. This method measures the electric resistance of materials using electric current induced by electric potential difference between two electrodes. Notably, there is no study that assess the integrity of bentonite buffer in a nuclear waste repository using electrical resistivity measurement. This study presents the electrical resistance numerical module under steady state using commercial finite element method (FEM), and quantitatively estimate the change of electrical resistance according to saturation and erosion of bentonite buffer. Furthermore, the electric potential and current density distribution formed between two electrodes are analyzed.

Compacted bentonite buffer blocks placed in the engineered barrier system for high-level nuclear waste disposal can undergo swelling, intrusion into rock fractures, and erosion with saturation. Bentonite erosion and intrusion can lead to bentonite mass loss via groundwater flow and can ultimately compromise the overall integrity of the disposal system. To ensure the long-term safety of deep geological disposal, it is essential to assess the hydro-mechanical interactions between the bentonite buffer and surrounding rock. In this study, the impact of bentonite erosion and intrusion on the mechanical properties of the jointed rock mass were assessed via elastic wave propagation measurements using the quasi-static resonant column test. Granite rock discs obtained from the Korea Underground Research Tunnel and Gyeongju bentonite were used to simulate jointed rock specimens with different bentonite intrusion conditions. Different degrees of bentonite intrusion were simulated by mixing bentonite and water to create bentonite paste and gel. The longitudinal and shear wave velocities under different normal stress levels were used to quantify the effects of bentonite intrusion on the mechanical characteristics of the rock joint. Complementary numerical analysis using the three-dimensional distinct element code (3DEC) was conducted to provide improved understanding of wave propagation within bentonite gouge-filled rock mass.

Bentonite is a promising buffer material for high-level radioactive waste (HLW) disposal due to the high nuclides sorption capacity and swelling property. However, bentonite has the potential to generate colloid particles, with small particle sizes less than 1,000 nm when in contact with groundwater. The bentonite colloids easily form pseudo-colloid with the released nuclides and migrate through the water-conducting rock to the biosphere. Therefore, understanding the generation and migration of bentonite colloids is crucial in assessing the safety of the HLW repository. In this study, an artificial fracture system was prepared to investigate colloid release from compacted bentonite. A 250 mm diameter acrylic artificial fracture system was used, with 30 mm of compacted calcium bentonite installed. Artificial groundwater flow was injected into the system at a flow rate of 250 μL/h, and every 6 mL of leachate was collected by a fraction collector. A film-type pressure sensor was equipped to monitor the swelling pressure, and the swelling was observed using a digital microscope. The results indicate that the compacted bentonite formed a mineral ring originating from the swelling of the bentonite, and the end of the ring generated colloid particles due to chemical erosion. Although the release rate of colloids increased with increasing flow rate, the colloid ratio depended on the low ionic strength of the injected artificial groundwater. This work contributes to the understanding of the chemical erosion and colloid release mechanism of compacted bentonite.

벤토나이트는 낮은 침투성, 높은 수착성, 자체밀봉특성, 내구성 등으로 인해 고준위 방사성 폐기물 처분을 위한 지하처분장에서 완충재 후보물질로 고려되고 있다. 적절한 처분장 조건에서 국내 Ca-벤토나이트에 대하여 지하수 침식에 의한 벤토나이트 입자의 발생 가능성과 발생된 벤토나이트 입자들의 영향에 대한 실험적 연구를 수행하였다. 실험결과 비록 벤토나이트의 팽윤압에 의한 암반 균열로의 벤토나이트의 침투는 적었지만 벤토나이트/화강암 경계에서 벤토나이트 입자가 발생될 수 있고 지하수 흐름에 의해 유동될 수 있음을 보였다. 압축된 벤토나이트 블록으로부터 이러한 벤토나이트 입자들의 유동화에는 각기 다른 과정들이 기여하고 있음을 확인하였다. 유량이 크면 클수록, 유출되는 벤토나이트 입자들의 농도가 높게 나타났다. 따라서 실험결과는 지하수 흐름에 의한 벤토나이트 표면의 침식은 침투과정과 함께 화강암 균열에서의 벤토나이트 입자들을 유동시키는 주요한 과정임을 보여준다.