This study investigated the effects of starch addition and type on the characteristics of extruded products of floury rice powder (FRP). Native starches from waxy, normal, and high-amylose corn, wheat, tapioca, and potatoes were used. Each starch replaced 30% of the dry weight of FRP. FRP and FRP-starch mixtures were extruded using a twin screw extruder at 19–20% moisture content, 18 Hz screw speed, and barrel temperature of 160℃, followed by drying at 80℃ for 3 h. The water absorption and water solubility indices of the FRP-starch mixtures were higher than those of starch alone, whereas swelling power exhibited the opposite trend. The gelatinization temperatures of the FRP-starch mixtures, except for the FRP-wheat starch mixture, shifted to higher temperatures than those of FRP, whereas their gelatinization enthalpies were lower. The pasting viscosities of the FRP-starch mixtures, except for the FRP-high-amylose cornstarch mixture, were higher than those of FRP. Regarding the extruded products, partial replacement of FRP with starch improved the expansion ratio and specific volume of the extrudates. The failure strength, measured using a 3-point bending test, was higher for the FRP-starch mixture (except for high-amylose corn and tapioca starches) than for FRP.

This study investigated the effect of dry heat treatment (DHT) on the physicochemical properties of hard type (HR) and floury type (FR) rice to improve the processing aptitude of rice flour. The rice flour was heated at 130oC for 0, 2 and 4 hours, and the color value, water absorption index (WAI), water soluble index (WSI), swelling power, solubility, pasting properties, particle shape and the X-ray diffraction were measured. After DHT, the L value of rice flour decreased, and the b value increased. The WAI, WSI, swelling power and solubility of HR and FR increased with the increase of treatment time. The cold viscosity and setback increased, while breakdown decreased. Cracks and lumps formed with fine particles were observed. The X-ray diffraction pattern was A-type, while the diffraction intensity decreased. According to the results of the two-way analysis of variance (ANOVA) test, the hydration and pasting properties were significantly different between HR and FR and were affected by DHT time. The results suggest that the properties of modified rice flour by DHT can be used in the food industry.

본 연구를 통하여 조생 다수성 벼 품종인 남일벼의 돌연변이 후대계통으로 'Namil(SA)2652-RGA-l-l-l-l'의 계보를 지니며 Namil(SA)-flo1로 명명된 분질계통의 건식제분 적성과 쌀가루의 이화학적 특성과 호화특성 등을 평가하였다. 배유절단면의 전자현미경 관찰결과 원품종인 남일벼는 배유절단면이 부드러우며 다변각의 전분립들이 치밀하게 배열된 반면 Namil(SA)-flo1은 원형모양의 전분립들이 매우 성기게 배열되어있었다. Namil(SA)-flo1의 작물학적 특성은 남일벼와 유사하였으나 등숙비율과 천립중이 낮았으며 이러한 특성은 백미수량 감소로 이어짐을 알 수 있었다. 조직분석기들 이용한 곡립경도측정 결과 Namil(SA)-flo1는 3,417 g으로 남일벼 (7,526 g)의 45% 수준으로 매우 낮았다. 건식제분기인 Buhler 제분기를 이용해 동일조건에서 생산된 쌀가루들에 대한 입도분석결과 Namil(SA)-flo1는 평균 86.1um 로서 원품종인 남일벼 (109.1um )는 물론 화성벼(112.2um )나 설갱벼 (97.6um )보다 매우 고운입자로 이루어져 있음을 확인하였다. 건식제분에 의한 쌀가루의 손상전분량 역시 Namil(SA)-flo1가 5.1% 수준으로 남일벼 (9.2%), 화성벼(10.3%) 및 설갱벼(7.1%) 보다 매우 낮아 Namil(SA)-flo1의 높은 건식제분 적합성을 확인할 수 있었다. 반면 Namil(SA)-flol에서 생산된 쌀가루의 이화학적 특성과 호화특성은 원품종인 남일벼의 고유한 특성을 견지하고 있는 것으로 사료되었다.