상업적으로 이용되는 폴리스티렌계 이온교환막은 제조 공정이 쉽고 간단하지만 막이 가지는 취성 때문에 내구성이 약하다는 단점을 가지고 있다. 이를 보완하기 위하여 친수성 그룹인 poly(ethylene glycol)을 곁사슬로 가지고 있는 poly(ethylene glycol)methyl ether methacrylate를 공중합시켜 음이온 교환막을 합성하였다. 지지체로는 내화학성 및 기계적 강도가 우수한 다 공성 PE 지지체를 사용하였고, 여기에 다양한 조성의 vinylbenzyl chloride, styrene, poly(ethylene glycol)methyl ether methacrylate, divinylbenzene, benzoyl peroxide를 녹인 단량체 용액을 지지체 기공에 채운 뒤 열중합 가교시켜 trimethylamine을 이 용하여 음이온 교환기를 도입해 세공충전 음이온 교환막을 합성하였다. 또한 poly(ethylene glycol)methyl ether methacrylate의 곁사슬 길이와 각 단량체가 차지하는 비율의 변화가 음이온 교환막의 전기화학적 특성에 미치는 영향을 알아보았다.

Sulfonated poly(arylene ether sulfone) (SPAES) random copolymers have been perceived as alternatives to perfluorinated sulfonic acid ionomers used as polymer electrolyte membranes for fuel cells. SPAES copolymers are suffering from degradation under harsh fuel cell operation conditions. One solution to overcome the decomposition issue is to fill SPAES copolymers into polymeric support films (e.g., poly(tetrafluoro ethylene), PTFE) with interconnected porous structures. It is difficult to fill the SPAES copolymers dissolved in polar aprotic solvents into PTFE support films owing to their different surface energies. In this study, a SPAES nanodispersion in a water-alcohol mixture is used to make defect-free pore-filling membranes where poly(ethylene glycol) oligomers are added to induce advanced morphologies for fast proton conduction.

In this study, block copolymer of polystyrene and polyethylene glycol methyl ether methacrylate(PEGMA) by ATRP(atom transfer radical polymerization) method was synthesized. 4 arm-molecule which contained halogen atom was synthesized for an initiator. With 4 arm-molecule monodispered polystyrene were synthesized by ATRP method. The molecular change of synthesized monodispersed polystyrene with respect to time was investigated and living polymer characteristic was confirmed. Block copolymer of polystyrene and polyethylene glycol methyl ether methacrylate(PEGMA) was synthesized by ATRP with macroinitiator which was synthesized from the monodispersed polystyrene(Mn=12000). The molecular weight of obtained PS-b-PEGMA was 22,000.

Previous researches for increasing the durability of concrete structures examined the characteristics of concrete using glycol ether admixture, and determined the optimal addition rate and evaluated durability of concrete. However, today’ s ready mixed concrete uses various industrial byproducts in order to improve the performance of concrete, and the quality of concrete changes depending on the addition of glycol ether admixture and curing condition. Considering this, we need to understand the characteristics of curing methods according to field condition. Thus, the present study evaluated the effects of replacement with fly ash as a binder and curing conditions (temperature and humidity) on the performance of concrete, and obtained data from a mock-up test for the practical use of concrete containing glycol ether admixture. According to the results of this study, the concrete showed resistance performance of around 30% to carbonation and around 40% to drying shrinkage. In addition, as for resistance to freezing and thawing, the relative dynamic modulus of elasticity was over around 85% through atmospheric curing. These performances prove the effect.

This study presents the results of experimental research to investigate the drying shrinkage properties of mortar containing the fly-ash and glycol-ether shrinkage reducing agent. the drying shrinkage of mortar was measured according to KS F 2424. It was confirmed from test results that 10% fly-ash replacement and 1% shrinkage reducing agent is most effective to decrease the shrinkage of mortar

This study presents the results of experimental research to investigate the drying shrinkage properties of mortar containing the fly-ash and glycol-ether shrinkage reducing agent. the drying shrinkage of mortar was measured according to KS F 2424. It was confirmed from test results that 10% fly-ash replacement and 1% shrinkage reducing agent is most effective to decrease the shrinkage of mortar.

The organic solvent is used in many industries. Generation of waste organic solvent is continuously increasing. The 2009 years total domestic production organic solvent is in use 21% total designation waste production with 682 thousand tons. processes of a waste organic solvent and management issue is increasing in advanced countries. To resolve this problem, evaluate the characteristics of a batch distillation column purification to propose alternative. Therefore, this study compares a refinement recovery characteristic of simple distillation and 10-stage distillation tower. It grasps a characteristic regarding refinement recovery of the waste organic solvent (Propylene Glycol Mnomethyl Ether Acetate)PGMEA which occurred at LCD processes through study of a hundred steps of distillation tower. In this study, the evaluate scale-up separation characteristics difference using 10-stage and 100-stage batch distillation column. The actual process of making a demonstration plant appointed by using waste organic solvents of high purity propose a method for recycling.