Graphene quantum dots (GQDs) are zero-dimensional carbonous materials with exceptional physical and chemical properties such as a tuneable band gap, good conductivity, quantum confinement, and edge effect. The introduction of GQDs in various layers of solar cells (SCs) such as hole transport layer (HTL), electron transport materials (ETM), cathode interlayer (CIL), photoanode materials (PAM), counter electrode (CE), and transparent conducting electrode (TCE) could improve the solar energy (SE) harvesting, separation and transportation of electrons and hole, thus ultimately enhance the overall performance and stability of SCs. The incorporation of GQDs in various layers such as HTL, ETM, CIL, PAM, CE, and TCE achieved photo conversion efficiencies (PCEs) of 18.63, 21.1, 12.81, 9.41, 8.1, and 3.66%, respectively. Furthermore, GQDs improved stabilities such as resistance to degradation for HTL (up to 77%), ETM (80%), resistance to UV light for ETM (94%), resistance to temperature in ETM (90%), and bending stabilities after 1000 cycles for HTL (88%) and for TCE (90%). There are reviews focused on the utilization of different carbon-structured materials such as graphene, carbon nanotubes (CNT), fullerenes, and carbon dots in SCs applications. More specifically, the utilization of GQDs for SCs is limited and yet to be explored in greater detail. This review mainly focuses on the recent advancement of various techniques of production of GQDs synthesis, utilization of GQDs in various layers like HTL, ETM, CIL, PAM, CE, and TCE for the enhancement of PCE, and the stability of SCs. As a result, we believe that an exclusive study on GQDs-sensitized solar cells (GQDSSCs) could provide an in-depth analysis of the recent progress, achievements, and challenges.

A novel kind of self-assembled graphene quantum dots-Co3O4 (GQDs-Co3O4) nanocomposite was successfully manufactured through a hydrothermal approach and used as an extremely effectual oxygen evolution reaction (OER) electrocatalyst. The characterization of morphology with scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that Co3O4 nanosheets combined with graphene quantum dots (GQDs) had a new type of hexagonal lamellar selfassembly structure. The GQDs-Co3O4 electrocatalyst showed enhanced electrochemical catalytic properties in an alkaline solution. The start potential of the OER was 0.543 V (vs SCE) in 1 M KOH solution, and 0.577 V (vs SCE) in 0.1 M KOH solution correspondingly. The current density of 10 mA cm− 2 had been attained at the overpotential of 321 mV in 1 M KOH solution and 450 mV in 0.1 M KOH solution. Furthermore, the current density can reach 171 mA cm− 2 in 1 M KOH solution and 21.4 mA cm− 2 in 0.1 M KOH solution at 0.8 V. Moreover, the GQDs-Co3O4 nanocomposite also maintained an ideal constancy in an alkaline solution with only a small deterioration of the activity (7%) compared with the original value after repeating potential cycling for 1000 cycles.

How to effectively deal with the polluted water by the pollutant of organic dyes is the world problem. It is of great significance if the organic dyes in the polluted water can be directly turned into the useful materials through a facile approach. Herein, the water which contains the common organic dye, Reactive red 2 (RR2), has been chosen to be the model to synthesize graphene quantum dots (GQDs) by a facile route. The comprehensive characterizations, including TEM (HRTEM), XPS, Raman, PL and UV–Vis. spectra, have been performed to confirm the structures and explore the properties of the synthesized GQDs. Meanwhile, the excellent PL properties and low biotoxicity of the GQDs confer them with the potential applications in the biological fields. When the GQDs are excited by the wavelength of 360 nm, the maximum emission is achieved at 428 nm. It is well demonstrated that the synthesized GQDs are able to detect the Al3+ which causes multiple diseases, such as Parkinson, Alzheimer, kidney disease, and even cancer. The detection range is from 90 to 800 μM, which is different from the reported kinds of the literature. Therefore, this work not only provides an economical and environmental route on solving the universal problem from organic dyes, but also facilitates to advancing the synthesis and application of GQDs.

Poor mechanical properties and bacterial infection are the main problems faced by dental restorative resins in clinical use. In this study, graphene quantum dots (GQDs) grafted with imidazole groups and mesoporous silica (MSN) are co-filled in a dental resin to impart excellent antimicrobial activity and mechanical properties to the dental resin. The higher specific surface area of GQDs and MSN results in an increased contact area with the resin matrix, which enhances the strength of the dental composite resin. The introduction of GQDs significantly improves the antimicrobial activity of the resin. The inhibition efficiency of the composite resin against Streptococcus mutans reached 99.9% with the addition of GQDs at only 0.2 wt.%. When MSN and GQDs are co-filled, MSN interferes with the release of GQDs, thus reducing the antimicrobial activity of the dental resin but improving the cyto-compatibility. By reasonably adjusting the amount of GQDs and MSN, the dental composite resin can exhibit excellent antimicrobial properties, mechanical properties and cyto-compatibility at the same time.

In this paper, we presented a hybrid composite of graphene quantum dots (GQDs)-modified three-dimensional graphene nanoribbons (3D GNRs) composite linked by Fe3O4 and CoO nanoparticles through reflux and ultrasonic treatment with GQDs, denoted as 3D GQDs-Fe3O4/CoO@GNRs (3D GFCG). In this hybrid, the 3D GNRs framework strengthened the electrical conductivity and the synergistic effects between GQDs and 3D GFCG enhanced the oxygen reduction reaction (ORR) activity of the nanocomposite. The results imply that decorating GQDs with other electro-catalysts is an effective strategy to synergistically improve their ORR activity.

Alzheimer's disease (AD) is one of the most common forms of dementia, affecting more than 50 million people globally. The onset of AD is linked to age, smoking, obesity, hypercholesterolemia, physical inactivity, depression, gender, and genetics of an individual. The accumulation of Aβ peptides and neurofibrillary tangles (NFTs) in the brain is one of the critical factors that lead to AD, which is known to disrupt neuronal signaling and causing neurodegeneration. As per the current understanding, inhibiting the accumulation of Aβ peptides and NFTs is crucial in the management/treatment of AD. Latest research studies show that nanoparticles have the potency of improving drug transport across the blood–brain barrier easily. Specifically, graphene quantum dots (GQDs), a type of semiconducting nanoparticles, have been established as effective inhibitors for blocking the aggregation of Aβ peptides. The small size of GQDs allows them to pass through the blood– brain barrier with ease. Moreover, GQDs have fluorescence properties, which can be used to detect the concentration of Aβ in vivo. In recent years, compared to other carbon materials, the low cytotoxicity and high biocompatibility of GQDs, give them an advantage in the suitability and clinical research for AD. In this manuscript, we have discussed the role of different types of nanoparticles in the transportation of encapsulated or co-assembled compound drugs for the treatment of AD and importantly, the role of GQDs in the diagnosis and management/treatment of AD.

The feasibility study of synthesizing graphene quantum dots from spent resin, which is used in nuclear power plants to purify the liquid radioactive waste, was conducted. Owing to radiation safety and regulatory issues, an uncontaminated ion-exchange resin, IRN150 H/OH, prior to its use in a nuclear power plant, was used as the material of experiment on synthesis of graphene quantum dots. Since the major radionuclides in spent resin are treated by thermal decomposition, prior to conducting the experiment, carbonization of ion-exchange resin was performed. The experiment on synthesis of graphene quantum dots was conducted according to the general hydrothermal/solvothermal synthesis method as follows. The carbonized ion-exchange resin was added to a solution, which is a mixture of sulfuric acid and nitric acid in ratio of 3:1, and graphene quantum dots were synthesized at 115°C for 48 hours. After synthesizing, procedure, such as purifying, filtering, evaporating were conducted to remove residual acid from the graphene quantum dots. After freeze-drying which is the last procedure, the graphene quantum dots were obtained. The obtained graphene quantum dots were characterized using atomic force microscopy (AFM), Fourier-transform infrared (FT-IR) spectroscopy and Raman spectroscopy. The AFM image demonstrates the topographic morphology of obtained graphene quantum dots, the heights of which range from 0.4 to 3 nm, corresponding to 1–4 graphene layers, and the step height is approximately 2–2.5 nm. Using FT-IR, the functional groups in obtained graphene quantum dots were detected. The stretching vibrations of hydroxyl group at 3,420 cm−1, carboxylic acid (C=O) at 1,751 cm−1, C-OH at 1,445 cm−1, and C-O at 1,054 cm−1. The identified functional groups of obtained graphene quantum dots matched the functional groups which are present if it is a graphene quantum dot. In Raman spectrum, the D and G peaks, which are the characteristics of graphene quantum dots, were detected at wavenumbers of 1,380 cm−1 and 1,580 cm−1, respectively. Thus, it was verified that the graphene quantum dots could be successfully synthesized from the ionexchange resin.

The mercury ion ( Hg2+) is regarded as one of the toxic cations that is extremely harmful and dangerous to human health and the environment. With this growing awareness, it is imperative that facile and rapid sensing systems developed for the detection of Hg2+. Due to excellent sensitivity and selectivity, graphene quantum dots (GQDs), a zero-dimensional carbon nanomaterial, are attracting the attention of researchers as promising candidates as fluorescent probes for Hg2+ detection. This study aimed at conducting an in-depth review of recent advances into GQD-based materials as fluorescent probes in Hg2+ sensing. This systematic review was carried out by covering three main databases, namely, Scopus and Science Direct as the dominant databases, followed by Google Scholar as the supporting database. GQD-based materials encompassing bare GQDs, N-GQDs, B, N-GQDs, N, S-GQDs, N, K-GQDs, RhB-GQDs, Cys-GQDs, PEHA-GQD-DPA, Gly-GQDs, Mn(II)-NGQDs, NH2– Ru@ SiO2- NGQDs and FA-GQDs were discussed thoroughly with regard to their synthesis strategies, along with their potential application in the detection of Hg2+. The doping of heteroatoms is envisaged to enhance the quantum yield and selectivity of bare GQDs. This review might unlock a wide range of opportunities for the application of various GQD-based materials as an adaptable, feasible and scalable approach to the detection of Hg2+.

The behaviour of semiconducting graphene quantum dots (GQDs), as good candidates for various biological carrier applications and optical sensing, are necessary to be studied under various conditions. In this study, GQD models were generated according to the geometrical and chemical specifications of synthesized GQDs to achieve the most realistic models. The GQDs’ bandgap and distribution of their electric surface charges were obtained using computational chemistry method. Finite element analysis was conducted on pristine and defective GQDs to study Young and shear modulus. Buckling load and resonant frequency modes of GQDs were calculated analytically and demonstrated under various boundary conditions. The dimension of GQDs has an average of 3.5 ± 0.4 nm, with an interlayer spacing of 0.36–0.40 nm. Computational chemistry studies revealed the characteristic zero-band-gap nature of graphene. Finite element studies showed that the by introducing the inevitable dislocation, mono atom vacancy and Stone–Wales defects to GQD models, their mechanical properties reduces to approach data from experimental investigations, whereas an increase in the number of layers does not influence the obtained results significantly.

The synthesis of graphene and graphene quantum dots (GQDs) employing various approaches with a range of precursors, chemicals, and parameters has been reported. Most of the top-down and bottom-up techniques employ strong and hazardous chemical environments, complicated and tedious procedures, are time-consuming, and often require special equipment. Another drawback of the techniques reported is the production of agglomerated, inhomogeneous, and non-dispersible graphene in aqueous solvents or organic solvents, thus limiting its application. This work specifically and comprehensively describes the electrochemical exfoliation of graphene and GQDs, which is often considered as a simple one-step, facile, non-hazardous, and highly efficient technique yet favourable for mass production. A brief discussion on the advantageous and challenges of the electrochemical technique and applications of the electrochemically exfoliated graphene and GQDs is also presented.

Graphene Quantum Dots (GQDs), zero-dimensional nanoparticles which are derived from carbon-based sources owned the new pavement for the energy storage applications. With the varying synthesis routes, the in-built properties of GQDs are enhanced in different categories like quantum efficiency, nominal size range, and irradiation wavelength which could be applied for the several of energy and optoelectronics applications. GQDs are especially applicable in the specific energy storage devices such as super capacitors, solar cells, and lithium-ion batteries which were demonstrated in this work. This paper critically reviews about the synthesis techniques used for the GQDs involving energy storage applications with increased capacitance, energy conversion, retention capability, and stability.

Polyaniline–graphene quantum dots (PANI–GQDs) are considered as an important candidate for applications in photovoltaic cells. In this work, GQDs were prepared using sono-Fenton reagent from reduced graphene oxide (rGO). PANI–GQD hybrid was also synthesized using the chemical in situ polymerization method. The synthesized materials were characterized using UV–visible (UV–Vis) spectroscopy, photoluminescence (PL) spectroscopy, current–voltage (I–V) characteristic, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray diffraction (XRD). Dynamic light scattering was also used to estimate the lateral size of GQDs. The enhanced visible-light absorbance in the hybrid was confirmed by UV–Vis analysis and the decrease in intensity around 3461 cm−1 in FT-IR spectra was due to the interaction between functional groups of PANI with GQDs. This led to improved thermal stability and conductivity as observed from TGA and I–V analysis, respectively. Moreover, the Raman spectrum for PANI–GQDs showed a decrease in the peak at ~ 1348 and ~ 1572 cm−1 as compared to PANI and GQDs. Similarly, from the XRD profile of PANI–GQDs, a shift in peak was observed due to an alteration in the microstructure. A sandwich device with cell structure glass/ITO/PANI–GQDs/Al was fabricated and its application was tested. Current density–voltage (J–V) curve of the device was measured with a Keithley SMU 2400 unit under an illumination intensity of 100 Wm−2 simulating the AM 1.5 solar spectrum. The hybrid exhibited photovoltaic properties, and 0.857% efficiency was observed in response to the applied voltage. This work suggests that PANI can be used as an alternative material for photovoltaic cells.