The initial radionuclide migration quantity depends on the total amount of solubilized species. Geochemical modeling based on a thermodynamic database (TDB) has been employed to assess the solubility of radionuclides. It is necessary to evaluate whether the TDB describes the domestic repository conditions appropriately. An effective way to validate the TDB-based modeling results is through direct comparisons with experimentally measured values under the conditions of interest. Here, the solubilities of trivalent Sm, Eu, and Am were measured in synthetic KURT-DB3 groundwater (Syn- DB3) and compared with modeling results based on ThermoChimie TDB. Ln2(CO3)3·xH2O(cr) (Ln = Sm, Eu) solids were introduced into the Syn-DB3 and dissolved Sm and Eu concentrations were monitored over 223 days. X-ray diffraction analysis confirmed that the crystallinity of the solid compounds was maintained throughout the experiments. The dissolved Sm and Eu concentrations at equilibrium were close to the predicted solubilities of Sm2(CO3)3(s) and Eu2(CO3)3(s) based on the ThermoChimie TDB. The Am solubility measured under oversaturated conditions was comparable to the measured Eu concentrations, although they were measured under different experimental settings. More experimental data are needed for Am-carbonate solid systems with careful characterization of the solid phases to better evaluate Am solubility in domestic groundwater conditions.

Alpha activities can be used for categorization, transportation, and disposal of radioactive waste generated from the operation of nuclear facilities including nuclear power plants. In order to transport and dispose of such low- and intermediate-level radioactive waste (LILW) to the Wolsong LILW Disposal Center (WLDC) at Gyeongju, the gross alpha concentration of an individual drum should be determined according to the acceptance criteria. In addition, when the gross alpha concentration exceeds 10 Bq/g, the inventory of the comprising alpha emitters in the waste is to be identified. Gross alpha measurements using a proportional counter are usually straightforward, inexpensive, and high-throughput, so they are broadly used to assay the total alpha activity for environmental, health physics, and emergency-response assessments. However, several factors are thoughtfully considered to obtain a reliable approximate for the entire alpha emitters in a sample, which include the alpha particle energy of a particular radionuclide, the radionuclide that is used as a calibration standard, the uniformity of film in a planchet, time between sample collection and sample preparation, and time between sample preparation and counting. Korea Atomic Energy Research Institute (KAERI) have evaluated the inventory of radionuclides in low-level radioactive waste drums to send every year hundreds of them to the WLDC. In this presentation, we revisit the gross alpha measurement results of the drums transported to WLDC in the past few years and compare them with the concentrations of alpha emitters measured from alpha spectrometry and gamma spectrometry. This study offers an insight into the gross alpha measurement for radioactive waste regarding calibration source, self-absorption effect, composition of alpha emitters, etc.

The Korea Atomic Energy Research Institute (KAERI) has facilities that are operated for the purpose of treating radioactive wastes and storing drums before sending them to a disposal site. Domestic regulations related to nuclear facility require radiological dose assessment resulting from release of gaseous radioactive effluent of nuclear facilities. In this study, ICRP-60-based dose conversion factors were applied to evaluate the radiation dose to residents in the event of operation and accident for the radioactive waste management facilities in KAERI. The radioactive gaseous effluent generated from each facility diffuse outside the exclusion area boundary (EAB), causing radiation exposure to residents. To evaluate the external exposure dose, the exposure pathways of cloudshine and radioactive contaminated soil were analyzed. The internal exposure dose was estimated by considering the exposure from respiration and ingestion of agricultural and livestock products. The maximum individual exposure dose was evaluated to be 1.71% compared to the dose limit. The assumed situation used for accidental scenarios are as follows; A fire inside the facility and falling of radioactive waste drum. It was a fire accident that caused the maximum exposure dose to individual and population living within an 80 km radius of the site. At the outer boundary of the low population zone (LPZ), the maximum effective dose and thyroid equivalent dose were estimated as 8.92 E-06% and 5.29 E-06%, respectively, compared to the dose limit. As a result of evaluating the radiological exposure dose from gaseous emissions, the radioactive waste treatment facilities and its supplementary facilities meet the regulations related to nuclear facility, and are operated safely in terms of radiological environmental impact assessment.

The nuclear facilities at Korea Atomic Energy Research Institute (KAERI) have generated a variety of organic liquid radwaste and radiation levels are also varied. At KAERI, the organic liquid radwaste has been stored at Radioactive Waste Treatment Facility (RWTF) temporarily due to the absence of the recognized treatment technique while inorganic liquid radwaste can be treated by evaporation, bituminization, and solar evaporation process. The organic liquid radioactive waste such as spent oil, cutting oil, acetone, ethanol, etc. was generated from the nuclear facilities at KAERI. Among the organic liquid radioactive wastes, spent oil is particularly significant. According to the nuclear safety act, radioactive waste can be cleared by incineration and landfilling if it meets the criteria of less than 10 μSv/h for individual dose and 1 person – Sv/y for collective dose. Dose assessment was performed on some organic liquid radioactive waste with a very low possibility of radioactive contamination stored in RWTF at KAERI. As a result, it was confirmed that some wastes met the regulatory clearance standards. Based on this, it was approved by the regulatory body, and this became the first case in Korea and KAERI for permission for regulatory clearance of organic liquid radioactive waste by landfill after incineration.

There is a large amount of radioactive waste in waste storage in the Korea Atomic Energy Research Institute. Some of the radioactive waste was generated during the dismantling process due to Korea Research Reactor 1&2 and it accounts for 20% of the total waste. Radioactive waste must be reduced by appropriate disposal methods to secure storage space and to reduce disposal costs. Research Reactor wastes include wastes that are below the acceptable criteria for selfdisposal and non-contaminated wastes, so they can be treated as wastes subject to self-disposal through contamination analysis and reclassification. In order to deregulation radioactive waste, it is necessary to meet the self-disposal standards stipulated in the Domestic Nuclear Act and the treatment standards of the Waste Management Act. The main factors of deregulation are surface contaminant, radionuclide activity and dose assessment. To confirm the contamination of waste, surface contaminant and gamma nuclide analysis were performed. After homogenizing the waste sample, it was placed in 1 L Mariinelli beaker. When collecting waste samples, 1 kg per 200 kg of waste was collected. The concentrations of the major radionuclides Co-60, Cs-134, Cs-137, Eu-152, and Eu-154 were analyzed using HPGe detector. To evaluate radiation dose, various computational programs were used. A dose assessment was performed with the analyzed nuclide concentration. The concentrations of representative nuclides satisfied the deregulation acceptance criteria and the results of the dose assessment corresponding to self-disposal method was also satisfied. Based on this results, KAERI submitted the report on waste self-disposal plan to obtain approval. After final approval, Research Reactor waste is to be incinerated and incineration ash is to be buried in the designated place. Some metallic waste has been recycled. In this study, the suitability of deregulation for self-disposal was confirmed through the evaluation of the surface contaminant analysis, radionuclide concentration analysis and dose assessment.

The radwaste repository consists of a multi-barrier, including natural and engineered barriers. The repository’s long-term safety is ensured by using the isolation and delay functions of the multi-barrier. Among them, natural barriers are difficult to artificially improve and have a long time scale. Therefore, in order to evaluate its performance, site characteristics should be investigated for a sufficient period using various analytical methods. Natural barriers are classified into lithological and structural characteristics and investigated. Structural factors such as fractures, faults, and joints are very important in a natural barrier because they can serve as a flow path for groundwater in performance evaluation. Considering the condition that the radioactive waste repository should be located in the deep part, the drill core is an important subject that can identify deep geological properties that could not be confirmed near the surface. However, in many previous studies, a unified method has not been used to define the boundaries of structural factors. Therefore, it is necessary to derive a method suitable for site characteristics by applying and comparing the boundary definition criteria of various structural factors to boreholes. This study utilized the 1,000 m deep AH-3 and DB-2 boreholes and the 500 m deep AH-1 and YS- 1 boreholes drilled around the KURT (KAERI Underground Research Tunnel) site. Methods applied to define the brittle structure boundary include comparing background levels of fracture and fracture density, excluding sections outside the zone of influence of deformation, and confining the zone to areas of concentrated deformation. All of these methods are analyzed along scanlines from the brittle structure. Deriving a site-specific method will contribute to reducing the uncertainties that may arise when analyzing the long-term evolution of brittle structures within natural barriers.

The engineered barrier system (EBS), composed of spent nuclear fuel, canister, buffer and backfill material, and near-field rock, plays a crucial role in the deep geological repository for high-level radioactive waste. Understanding the interactions between components in a thermo-hydro-mechanical -chemical (THMC) environment is necessary for ensuring the long-term performance of a disposal facility. Alongside the research project at KAERI, a comprehensive experimental facility has been established to elucidate the comprehensive performance of EBS components. The EBS performance demonstration laboratory, which installed in a 1,000 m2, consists of nine experimental modules pertaining to rock mechanics, gas migration, THMC characteristics, buffer-rock interaction, buffer & backfill development, canister corrosion, canister welding, canister performance, and structure monitoring & diagnostics. This facility is still conducting research on the engineering properties and complex interactions of EBS components under coupled THMC condition. It is expected to serve as an important laboratory for the development of the key technologies for assessing the long-term stability of engineered barriers

Long-term climate and surface environment changes can influence the geological subsurface environment evolution. In this context, a fluid flow pathway developing and connection possibility can be increased between the near-surface zone and deep depth underground. Thus, it is necessary to identify and prepare for the overall fluid flow at the entire geological system to minimize uncertainty on the spent nuclear fuel (SNF) disposal safety. The fluid flow outside the subsurface environment is initially penetrated through the surface and then the unsaturated area. Thus, the previously proved reports, POSIVA in Finland, suggested that sequential research about the fluid infiltration experiment (INEX) and the investigation is necessary. Characterizing the unsaturated zone can help predict changes and ensure the safety of SNFs according to geological long-term evolution. For example, the INEX test was conducted at the upper part of ONKALO, about 50 to 100 m depth, to understand the geochemical evolution of the groundwater through the unsaturated zone, to evaluate the main flow of groundwater that can approach the SNF disposal reservoir, and to estimate the decreasing progress of the buffering capacity along the pathway through the deep geological disposal. In the present study, a preliminary test was performed in the UNsaturated-zone In-situ Test (UNIT) facility near the KAERI underground research tunnel to design and establish a methodology for infiltration experiments consistent with the regional characteristics. The results represented the methodological application is possible for characterizing unsaturated-zone to perform infiltration experiments. The scale of the experiment will be expanded sequentially, and continuous research will be conducted for the next application.

In compliance with the amended export control of strategic items and technology in Jan. 2014, KAERI should pay attention to the export control of ITT (Intangible Technology Transfer). To control an ITT (Intangible Technologies Transfer) effectively and efficiently, the Korean government encourages the R&D institute and universities obtaining the ICP (Internal Compliance Program) from the relevant authority, MOTIE. This means that the exporters can control the ITT by themselves, because the exporters know very well the counterparts of the trading and the exporting items and technologies. In fact, ICP is for export control of dual-use items and technology in Korea. However, KAERI has tried to obtain a license from the authority, MOTIE. In an effort to do so, KAERI completed enacting a new internal self–regulation for export controls in 2016, and proceeded to apply for an ‘AA’ license of ICP in 2017 and obtained the ICP license in 2018 and re-obtained the license in 2021 from the MOTIE. In light of KAERI’s case, to obtain the ‘AA’ license of ICP is one of the best methods to increase the ability of export controls. As of now, there is no R&D institutes sponsored by the Korean government to obtain the ‘AA’ license of ICP except KAERI. KAERI can provide the actual methods as a standard case to the R&D institutes in Korea for obtaining an ‘AA’ license of ICP. According to the internal regulation of KAERI for export control, KAERI implemented an inner self-audit for export control in Nov. 2022. This is the first real self-audit for export control at KAERI. The main purpose of the self-audit is to check the transfer management of ITT and the relationship of relevant office through the interview of the staffs in the ICP organization. KAERI self-audit planed specifically and implemented for the achievement of the basic principal of selfaudit. The specific contents of this self-audit is as follows - The interview of the relevant offices: physical protection office, manpower planning office, manpower management office, nuclear education and training center, technology transfer office and international cooperation office, nuclear control and management office - Building the self-audit checklist considering the characteristics of each office - The confirmation of the inner procedure and the status of management on the export controls Through the interview of the relevant office, KAERI checked the inner procedure and the status of management on the export controls and tried to provide the supplementary measures of each relevant offices. The followings are the main results of the inner self-audit implemented in Nov. 2022. - Generally, the staffs know the meaning and relevant regulation such as foreigner’s management and the intangible technology transfer - Each office reflects the necessities of export controls on the relevant regulation and procedures and make DB for the proper duty. However, there is no indication for export controls on the DB - In the case of foreigner’s temporary visit for simple work and site tour, there is a difficult situation not to be able to check all the visitors by checking the denial lists - If necessary, KAERI may build the TFT (Task force Team) for the efficiency of export controls - Others

As the importance of radioactive waste management has emerged, quality assurance management of radioactive waste has been legally mandated and the Korea Radioactive Waste Agency (KORAD) established the “Waste Acceptance Criteria for the 1st Phase Disposal Facility of the Wolsong Lowand Intermediate-Level Waste Disposal Center (WAC)”, the detailed guideline for radioactive waste acceptance. Accordingly, the Korea Atomic Energy Research Institute (KAERI) introduced a radioactive waste quality assurance management system and developed detailed procedures for performing the waste packaging and characterization methods suggested in the WAC. In this study, we reviewed the radioactive waste characterization method established by the KAERI to meet the WAC presented by the KORAD. In the WAC, the characterization items for the disposal of radioactive waste were divided into six major categories (general requirements, solidification and immobilization requirements, radiological, physical, chemical, and biological requirements), and each subcategories are shown in detail under the major classification. In order to satisfy the characterization criteria for each detailed item, KAERI divided the procedure into a characterization item performed during the packaging process of radioactive waste, a separate test item, and a characterization item performed after the packaging was completed. Based on the KAERI’s radioactive waste packaging procedure, the procedure for characterization of the above items is summarized as follows. First, during the radioactive waste packaging process, the characterization corresponding to the general requirements (waste type) is performed, such as checking the classification status of the contents and checking whether there are substances unsuitable for disposal, etc. Also, characterization corresponding to the physical requirements is performed by checking the void fraction in waste package and visual confirmation of particulate matter, substances containg free water, ect. In addition, chemical and biological requirements can be characterized by visually confirming that no hazardous chemicals (explosive, flammable, gaseous substances, perishables, infectious substances, etc.) are included during the packaging process, and by taking pictures at each packaging steps. Items for characterization using separate test samples include radiological, physical, and chemical requirements. The detailed items include identification of radionuclide and radioactivity concentration, particulate matter identification test, free water and chelate content measurement tests, etc. Characterization items performing after the packaging is completed include general requirements such as measuring the weight and height of packages and radiological requirements such as measurements of surface dose rate and contamination, etc. All of the above procedures are proceduralized and managed in the radioactive waste quality assurance procedure, and a report including the characterization results is prepared and submitted when requesting acceptance of radioactive waste. The characterization of KAERI’s radioactive waste has been systematically established and progressed under the quality assurance system. In the future, we plan to supplement various items that require further improvement, and through this, we can expect to improve the reliability of radioactive waste management and activate the final disposal of KAERI’s radioactive waste.

The nuclear facilities at Korea Atomic Energy Research Institute (KAERI) have generated a variety of liquid radioactive waste and most of them have low-level radioactive or lower levels. Some of the liquid radioactive waste generated in KAERI is transported to Radioactive Waste Treatment Facility (RWTF) in 20 L container. Liquid radioactive waste transported in a 20 L container is stored in a Sewer Tank after passing through a solid-liquid separation filter. It is then transferred to a very low-level liquid radioactive waste Tank after removing impurities such as sludge through a pre-treatment device. The previous pre-treatment process involved an underwater pump and a cartridge filter device passively, but this presented challenges such as the inconvenience of having to install the underwater pump each time, radiation exposure for workers due to frequent replacement of the cartridge filter, and the generation of large amounts of radioactive waste from the filter. To address these challenges and improve efficiency and safety in radiation work, an automated liquid radioactive waste pre-treatment device was developed. The automated liquid radioactive waste pre-treatment device is a pressure filtration system that utilizes multiple overlapping filter plates and pump pressure to effectively remove impurities such as sludge from liquid radioactive waste. With just the push of a button, the device automatically supplies and processes the waste, reducing radiation hazards and ensuring worker safety. Its modular and mobile design allows for flexible utilization in various locations, enabling efficient pre-treatment of liquid radioactive waste. To evaluate the performance of the newly constructed automated liquid radioactive waste treatment device, samples were taken before and after treatment for 1 hour cycling and analyzed for turbidity. The results showed that the turbidity after treatment was more than about four times lower than before treatment, confirming the excellent performance of the device. Also, it is expected that the treatment efficiency will improve further as the treatment time and number of cycles increase.

Long-term evolution of the surface environments can affect the safety of deep geological disposal. Therefore, it is important to understand the water balance components constituting the water cycle among atmosphere, surface, and subsurface. In Finand, the surface and near-surface hydrological model (SHYD) was developed to calculate the water balance of Olkiluoto Island. Through the intensive site investigations, the data sets as input for the site scale model in present-day conditions have been collected such as transpiration and meteorological data. In this study, weighing lysimeter method was selected to quantify small-scale soil water balance of the vadose zone in the UNsaturated zone In-situ Test facility (UNIT) around KAERI Underground Research Tunnel. Hydrological components such as precipitation, evapotranspiration (ET) and leachate were derived from water balance analysis on the lysimeter measurements in UNIT. Among the hydrological components, actual ET accounts for more than 50% of the annual precipitaion, and thus plays an important role on predicting the hydrological evolution in the future. In this context, actual ET measured from the weighing lysimeter was compared with potential ET estimated from meteorological data using FAO-56 Penman-Monteith method.

For the safety assessment of the high-level radioactive waste (HLRW) disposal, the thermodynamic data such as solubility products, formation constants of complexes, redox equilibrium constants of radionuclides, and their reaction enthalpy and entropy are required. In order to recommend and summarize the reliable data, thermodynamic databases (TDB) have been persistently developed through the OECD-NEA TDB projects and an updated TDB of actinides has been recently published in 2020. To date, reliable data for Pu reactions are scarce due to the possibility of coexistence of four different oxidation states, Pu(III-VI) by redox equilibria in solutions. To determine the thermodynamic data for the reaction of each Pu oxidation state, it is necessary to precisely control the oxidation state and quantitatively analyze all reactants, products and bi-products by using highly sensitive speciation techniques. Since 2004, the nuclear chemistry research team in KAERI has been focused on developing techniques for the sensitive chemical speciation by using laser-based spectroscopy and determining thermodynamic data of actinides such as U, Pu, Am. In this paper, chemical speciation and thermodynamic studies on Pu in KAERI are reviewed. A combination of a commercial spectrophotometer and a capillary cell was adopted for a sensitive chemical speciation of Pu(III-VI) in solutions. A sensitive detection of trace amount of Pu colloids was carried out with the laser-induced breakdown detection (LIBD) system. Pu(VI) complexation with hydroxide or carbonate ions were investigated under strong oxidation conditions controlled with hypochlorite (NaOCl). The solubility product of Pu(OH)3(am) and formation constant of Pu(III)-OH speices were determined by a combination of wet-chemistry experiments and several analysis methods of spectrophotometry, LIBD, radiometry under a strong reducing condition controlled by electrochemistry. More recently, we reported the reaction enthalpy and entropy data for the formation of Pu(OH)2+ and the dissolution of Pu(OH)3(am). A preliminary data for reaction between Pu(III) and organic matter will be presented.

In KAERI, Waste storage facility in the radiation management area has stored a large amount of wood waste. The amount of waste is approximately 27,000 kg, it accounts for 17% of the total waste in waste storage facility. Proper disposal of wood waste improves the fire resistance performance, secure storage space and reduce disposal costs. In order to self-disposal of wood waste, it is necessary to satisfy the self-disposal standards stipulated by the domestic Atomic Energy Act and the treatment standards of the Waste Management Act. The main factors of standards are surface contaminant, radionuclide activity and radiation dose effects. To confirm the contamination of wood waste, direct indirect measurement methods and gamma nuclide analysis were performed. To evaluate radiation dose, various computational programs were used. The results of the analysis were satisfied with domestic regulations on the classification and self-disposal of radioactive wastes. Based on this results, KAERI submitted the report on wood waste self-disposal plan to obtain approval. After final approval, wood waste is to be incinerated and incineration ash is to be buried in the designated place. The objective of this study is to provide total procedure of wood waste self-disposal and effective representative sampling method.