In the present study, we systematically investigated the effect of Mn addition on nitrogenation behavior and magnetic properties of Sm-Fe powders produced by reduction-diffusion process. Alloy powders with only single phase were successfully produced by the reduction-diffusion process. The coercivity of powder rapidly increased during nitrogenation and reached the maximum of 637 Oe after 16 hours. After further nitrogenation, it decreased. In contrast, the coercivity of powder gradually increased during nitrogenation for 24 hours. The coercivity of powder was higher than that of powder at the same condition of nitrogenation. It was considered that the Mn addition facilitates the nitrogenation of powder and enhances the coercivity.

Magnetic properties and the microstructures of magnets prepared by spark plasma sintering were investigated in order to enhance magnetic properties by grain size control. Nd-Fe-B magnets were fabricated by the spark plasma sintering under 30 MPa at various temperatures. The grain size was effectively controlled by the spark plasma sintering and it was possible to make Nd-Fe-B magnets with grain size of 5.9 .

The alginate-based hydrogel was prepared as a pH-sensitive drug delivery system. To enhance the drug loading capacity, activated carbon was introduced as a drug absorbent. The iron oxide was incorporated into the alginate matrix for the magnetic transferring to the target organ. The activated carbon and iron-oxide were dispersed uniformly in the alginate hydrogel. The drug release from the alginate/activated carbon composite hydrogel was carried out in various pH conditions with vitamin B12 and Lactobacillus lamnosers as model drugs. The fast and sustainable release of drug was observed in the basic condition due to the pH-sensitive solubility of alginate. The novel drug delivery system having pH-sensitive release property and magnetic movement to target place was developed by using the alginate/activated carbon composite magnetic hydrogels.

In this paper deals with behavior of the magnetic abrasive using Ba-Ferrite on polishing characteristics in a new internal finishing of STS304 pipe applying magnetic abrasive polishing. The magnetic abrasive using Ba-Ferrite grain WA used to resin bond fabricated low temperature. And Ba-Ferrite of magnetic abrasive powder fabricated that Ba-Ferrite was crused into 200 mesh. The previous research have made an experiment in the static state the movement of magnetic abrasive grain is nevertheless in the dynamic state. In this paper, We could have investigated into the changes of the movement of magnetic abrasive grain. In reference to this result, we could have made the experiment which is set under the condition of the magnetic flux density, polishing velocity according to the form of magnetic brush.

Nd-(Fe, Co)-B합금에 Ni, Al, Ti등을 복합치환하여 그에 따른 산화거동과 자기적 성질의 변화를 조사하였다. 이들 리본의 산호거동은 parabolic한 거동을 나타내고 있으며, Ni 첨가시 매우 낮은 산화량을 나타내었다. 또한 산화된 리본은 Nd-rich상의 우선적 산화에 의해 표면에 요철이 관찰되었으며 Ni 첨가시 그러한 요철은 많이 줄어들었다. 표면의 산화층은 Nd산화물이었고, 이는 입계에 있는 Nd-rich상이 산화되고 이것이 확산 통로로 작용하였다고 생각된다. 산화가 진행됨에 따라 입계상에 의한 domain wall pinning이 약해져 자기특성이 저하하였다. 그러나 Ni 첨가시 이러한 산화거동이 크게 억제되었으며 Ni의 첨가는 Nd-rich상의 산화저항성을 증가시킴으로써 리본의 산화를 억제해 자기특성의 저하를 억제하였다.

수평자장을 건 Czochralski(HMCZ) 방법으로 자장강도(B)와 도가니 회전속도(C)가 실리콘 단결정의 산소편석에 미치는 영향에 대하여 연구하였다. B=2, 3, 4kG와 C=4-15rpm에서<100> 방향으로 성장시킨 57mm 직경의 단결정들 내의 산소분포는 대체로 축을 따라서 불균일하였고 톱니모양을 나타내었다. 종래의 CZ 방법과 비교할 때, 이러한 산소분포의 불균일성은 위 강도의 수평자장이 결정성장계면으로의 산소전달에 불안정한 요소로 작용했음을 나타낸다고 볼 수 있다. 반면에 C의 증가는 산소분포의 불균일성의 약화와 산소농도의 전반적인 증가를 유도하였다. 이 결과를 토대로 B=2kG에서 27-36ppma인 산소분포를 가진 단결정이 프로그램된 C에 의해서 얻어졌다. 소자제조공정을 모의한 열처리 과정에서 HMCZ 실리콘의 산소석출은 종래의 CZ 실리콘의 산소석출에 비해서 상대적으로 불균일하였고, as-grown 상태에서의 고르지 못한 HMCZ 실리콘의 산소분포가 주요 원인임이 밝혀졌다.