Forward osmosis (FO) process has been attracting attention for its potential applications such as industrial wastewater treatment, wastewater reclamation and seawater desalination. Particularly, in terms of fouling reversibility and operating energy consumption, the FO process is assumed to be preferable to the reverse osmosis (RO) process. Despite these advantages, there is a difficulty in the empirical step due to the lack of separation and recovery techniques of the draw solution. Therefore, rather than using FO alone, recent developments of the FO process have adapted a hybrid system without draw solution separation/recovery systems, such as the FO-RO osmotic dilution system. In this study, we investigated the performance of the hollow fiber FO module according to various operating conditions. The change of permeate flow rate according to the flow rates of the draw and feed solutions in the process operation is a factor that increases the permeate flow rate, one of the performance factors in the positive osmosis process. Our results reveal that flow rates of draw and feed solutions affect the membrane performance, such as the water flux and the reverse solute flux. Moreover, use of hydraulic pressure on the feed side was shown to yield slightly higher flux than the case without applied pressure. Thus, optimizing the operating conditions is important in the hollow fiber FO system.

Floating PV generation system, renewable energy power plant, is able to overcome the disadvantages of ground PV generation system and improve generating efficiency. The frame structural system is an established technology among a diversity of structural technologies which has been developed for related fields. In this paper, the both structural safety and characteristics of floating PV generation structures depend on the different placement angle of solar module are investigated to improve the commercial viability, the structural safety, and characteristics of floating PV generation structures. In addition, for the estimation of structural safety, FE analyses are conducted. From the results, the lower placement angle of solar module improves the structural safety of floating PV generation system.

The purpose of this study is to evaluate the flexural performance of the SCP module fabricated using 40 MPa high-filling concrete and to verify the design flexural load presented in the INCA guidance of DNV. As a result, the maximum flexural load of the SCP module obtained through the structural test was 872 kN, the design flexural load and ultimate load were satisfied.