이 연구는 해외의 복수국적 제도를 살펴보고 한국의 제도와 비교해 보 며, 한국의 복수국적제도의 방향을 제시하고자 하였다. 지난 20년 사이, 전 세계에서 복수국적의 취득이 점점 더 많이 허용되고 있음에도 불구하 고 한국은 여전히 다중국적 취득을 부정적으로 생각한다. 이는 하나의 국적을 가진 일반인들에게 상실감과 역차별 논의를 제공할 수 있기 때문 이다. 그러나 이제 전통적인 국가의 개념이 약화된 만큼, 편리한 삶을 위 해 다국적 제도의 선택적 기능을 활용할 필요가 있다. 복수국적 취득 제 한은 정체성의 형성 과정 및 표현과 생활 영역 선택 등을 제한하여 물리 적인 거주·이전의 자유와 행복추구권에 대한 제한이 되며, 국적 보유의 자유에 대한 제한이 된다. 재외동포단체들은 국내 체류 동포를 국적으로 구분하지 말고 한국 사회의 주요 구성원으로 수용해 주기를 희망하였다. 이에 본 연구자는 현재 허용되고 있는 복수국적자의 연령을 하향하여 경 제활동 인구 증가 등 국가에 이익이 되는 정책을 제안하였다. 또한 설문 을 통해 차세대의 국민됨의 인식이 ‘국적’ 자체보다는 사회·정서적 교감 을 더 중요시한다는 것을 알 수 있었다. 이 결과는 미래세대의 인식 변 화에 맞게 국적 제도도 변화가 필요하다는 것을 의미하는 것이다.

Background: The multiple hop test is an active performance test that has been commonly used to assess individuals with functional ankle instability. Previous studies have suggested that insufficiency of dynamic postural stability and passive stability during dynamic activities can have an influence on performance in the multiple hop test. However, no study has investigated the effects of dynamic postural stability training and ankle bracing on multiple hop test performance in individuals with functional ankle instability. Objects: The purpose of this study was to compare the immediate effects of dynamic postural stability training versus ankle bracing in the performance of the multiple hop test for participants with functional ankle instability. Methods: Twenty-nine participants with functional ankle instability who scored below 24 in the Cumberland Ankle Instability Tool were selected. The participants were randomly divided into two groups: a dynamic postural stability training group (n1=14) and an ankle bracing control group (n2=15). The multiple hop tests were performed before and after applying each intervention. Dynamic postural stability training was performed using visual-feedback-based balance-training equipment; participants in this group were asked to perform a heel raise in a standing position while watching the centering of their forefoot pressure to prevent excessive ankle inversion. Ankle bracing was applied in the control group. Results: When comparing the pre- and post-intervention period for both groups, both methods significantly improved the results of the multiple hop test (p<.05). However, no significant differences were shown between the dynamic postural stability training and ankle bracing groups (p>.05). Conclusion: Both dynamic postural stability training and ankle bracing showed significant improvement (2.85 seconds and 2.05 seconds, respectively) in test performance. Further study is needed to determine the long-term effects of dynamic postural stability training and to determine whether insufficient dynamic postural stability is a causative factor for functional ankle instability.

As manufacturing industries become globalized, product design affects every area of organization. The design sets the goals for a number of different departments, so if it fails to effectively communicate these goals, the entire organization is less efficient. In addition, To communicate clearly, the design must represent a product that meets its technical specification.GD&T (Geometric Dimensioning and Tolerancing) is one of the most important factors, which has an effect on efficiency of manufacture system, in designing products. However, most of designers in different industries are prone to ignore the importance of GD&T.To analyse the importance of GD&T compliance with international standards for design drawing, a comparison analysis of the difference between two methods, composite profile control and multiple single segment profile control, is performed on three different cases and suggests how it used to be more suitable.Composite profile tolerance is specified by a dual feature control frame that has one profile symbol specified with two lines of tolerance information. Whereas a multiple single segment profile control is when two or more single segment profile callouts are used to define the location and/or orientation and/or size and/or form of a part feature. In this study, the following results will be provided : a clear definition and an obvious difference of the tolerance zone, datums and datums sequence and minimization of tolerances.On this study, composite profile tolerance and multiple single segment profile tolerance were discussed. Next steps of research will consist on reaching more accurate results for profile control. Further research will be focused on dealing with the remaining 14 symbols of GD&T.

In 3D games, the deferred rendering is an effective way in processing realistic visual effects using multiple render targets regardless of the scene complexity. In this paper, based on deferred rendering using multiple render targets, the 3D game visual effect techniques such as dynamic lights, specular, shadow, motion blur, and water shading are compared and analysed. The 3D game supporting deferred rendering is developed to evaluate various 3D rendering effects with variation of the size of the render target memory in terms of the rendering speed. The performance results show that the rendering speed of the 3D visual effect techniques with 4bytes render target memory is average 1.4 and 1.9 times better than those of 8bytes and 16bytes memories, respectively. Also, the shadow mapping with 2-pass plays the biggest role on the performance. Other techniques with 1-pass cause a negligible speed degradation.

The Henyey-Greenstein (H-G) phase function, which is characterized by a single parameter, has been generally used to approximate the realistic dust-scattering phase function in investigating scattering properties of the interstellar dust. Draine (2003) proposed a new analytic phase function with two parameters and showed that the realistic phase function is better represented by his phase function. If the H-G and Draine's phase functions are significantly different, using the H-G phase function in radiative transfer models may lead to wrong conclusions about the dust-scattering properties. Here, we investigate whether the H-G and Draine's phase functions would indeed produce significant differences in radiative transfer calculations for two simple configurations. For the uniformly distributed dust with an illuminating star at the center, no significant difference is found. However, up to ~ 20% of difference is found when the central star is surrounded by a spherical-shell dust medium and the radiation of λ < 2000 Å is considered. It would mean that the investigation of dust-scattering properties using the H-G phase function may produce errors of up to ~ 20% depending on the geometry of dust medium and the radiation wavelength. This amount of uncertainty would be, however, unavoidable since the configurations of dust density and radiation sources are only approximately available.

This study compares the differences between a multiple-choice (MC) and an open-ended (OE) reading comprehension test in a within-subject design to investigate test validity by comparing the two methods. A total of 70 Korean undergraduates participated in the present study. After taking a cloze test, participants read a passage, returned it and took two types of reading comprehension tests. Results showed that there was a statistical difference between the two test methods in a within-subjects design, which agrees with previous between-subjects studies. The higher scores on the MC format were attributed to three reasons: memory constraint, the nature of the task, and test-taking strategy. Further analysis indicated that both proficiency level groups were significantly affected by the test methods. Moreover, both the MC and OE tests significantly separated the two proficiency levels. Information from a survey provides more information regarding differences between the two test methods.

한국의 DGPS 측위정도와 복수 기준국을 이용하였을 때의 측위정도를 연구하기 위하여 2001년 1월부터 10 월까지 해상용 DGPS수신기(MGP-100D, GP-36) 를 이용하여 여수, 부산의 고정점에서 정점관측을 행하였으며, 측위정도의 변화를 조사하기 위해 부경대학교 내의 회류 수조에서 2001년 10월 15일~22 일까지 일주일 동안 관측을 행하였다. 또한 DGPS 기준국의 유효 이용범위에 대해 조사하기 위해 2001년 1월 9일~18일 사이에 한국남해안을 항해, 정박하면서 실험을 행하였으며, 그 결과를 요약하면 다음과 같다. (1) 단일 기준국을 이용하였을 때의 2drms 와 기준점으로부터 평균위치까지의 편위거리는 각각 5.6m, 7.3m 이었고, 실제 위치로부터 한쪽 방향으로 편향되어 나타났다. (2) 복수 기준국을 이용하여 산술평균하였을 때의 2drms와 기준점으로부터 평균위치까지의 편위거리는 각각 5.5m, 3.2m 이었고, 가중평균 하였을 때의 2drms와 기준점으로부터 평균위치까지의 편위거리는 각각 5.3m. 3.8m 이었다. 또한 사용자가 기준국으로부터 멀어질수록 복수 기준국을 이용하는 쪽이 측위정도가 더 향상되는 것으로 나타났다. (3) 측위오차 일변화는 16~22시 사이에 증가하였고, 관측된 평균 위성 수와 HDOP는 각각 7.lm, 0.49이었다. (4) 한국 남해안을 항해하며 DGPS 기준국의 유효범위를 조사한 결과. 1l0nm인 것으로 나타났으며, 신호강도는 19㏈ 이하, 신호 대 잡음비 8㏈ 이하에서는 기준국 보정정보를 이용할 수 없었다. 이와 같이 한국 남해안 일대에서의 측위 실험결과 복수 기준국을 이용하는 것이 단일 기준국을 이용하는 것보다 측위정도가 더 개선되는 것으로 나타났으며, 기선장이 길수록 복수 기준국을 이용하는 쪽이 더 양호한 정도를 나타내었다., 말즘 등의 감소를 초래하였다.on technique, and then classified by a multistage hierarchical clustering classification. The classification results were compared to them of the non-restored simulation images. The restoration with an appropriate temperature considerably reduces error in classification, especially for noisy images. This study made experiments on the satellite images remotely sensed on the Korean peninsula. The experimental results show that the proposed approach is also very effective on image classification in remote sensing.eate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times higher than the predicted values obtained from Nusselt's film condensation theory on tilted plate. Using those two expressions, a correlation was formulated as a function of heat flux and tilt angle, to determine t

본 연구는 실제 구조진단 사례에 기초하여 재료와 형식 및 공용기간에 따라 교량의 응답, 충격계수, 고유진동수 및 각 특성의 해석값/계측값 비 등에 관한 기술통계를 분석하고 주재료에 따른 T-검정과 구조형식 및 공용기간에 따른 분산분석을 통해서 요인 부집단 수준 간동질성 검정 및 다중비교분석을 수행하였다. 본 연구 결과는 응답 분포의 중심값, 산포도, 대칭성 등 통계적 특성 및 비교분석 집단 간 동질성 식별을 위한 참조값을 제공하며, 이것은 내하력 평가 등 구조 진단과 설계에서 엔지니어들이 취득한 계산 또는 계측값의 타당성을 비교검토하고 데이터베이스를 활용하는 등의 공학적 판단을 하는데 실제적으로 유용한 정보를 제공할 것으로 기대된다.