Non-stoichiometric ceramics of were prepared by self-propagating high temperature synthesis reaction with various processing conditions and their stoichometric numbers were determined by neutron diffraction. The neutron diffraction patterns were measured at room temperature using monochromatic neutrons with a wave length of 0.18339 nm from a Ge(331) mocochromator at a 90 degree take off angle. The Rietveld refinement of each pattern converged to good agreement (x2=1.88-2.24). The neutron diffraction analysis revealed the final stoichiometries of the ferrites were and respectively. This supports that final stoichiometric number of the self-propagating high temperature synthesis product can be controlled by the processing parameters during the combustion reaction.

Mn-Mo-Ni 저합금강의 중성자 조사에 따른 기계적(미세경도, 인장, 샤피충격시험) 및 자기적(포화자화, 보자력, 잔류자화, Barkhausen Noise(BN)진폭, BN에너지) 성질 변화를 측정하여 이들의 상관관계를 고찰하였다. 기계적 성질시험 결과, 중성자 조사로 인하여 항복강도, 인장강도, 미세경도 및 천이온도(T41J)는 증가하였고 최대흡수에너지(USE)는 감소하였으며, 인장 시험의 경우 용접금속에서는 모재와 비교했을 때 큰 변화가 없었다. 자기적 성질을 측정한 결과, 잔류자화, BN진폭, BN에너지는 감소하였고 보자력은 급격히 증가하는 것으로 나타났다. 기계적.자기적 성질변화의 상관관계에서 자기적성질인 보자력 증가에 따라 천이온도, 항복강도, 경도는 증가하고 USE는 감소하였고, BN진폭의 경우는 보자력과 반대의 경향을 보였다. 본 실험에서 중성자조사로 인한 기계적.자기적 성질변화가 일관성 있는 상관관계가 있음을 확인하였고, 이들의 변화를 통해 조사손상을 평가하는 데 이용 가능하다.

방사선물질의 수송 및 저장용기 등에 사용되는 에폭시수지계 중섣자 차폐재, KNS-201, KNS-301 및 KNS-601을 제조하였다. 기본물질은 개질 및 수소 첨가된 비스페놀 A형 그리고 노블락형 에폭시수지이며, 첨가제로는 수산화알루미늄 및 탄화붕소이다. 이들 중성자 차폐재들의 열적 및 역학적 성질 및 재방사선성 등을 평가하기 위해 여러 특성시험을 행하였다. 조사된 제반 특성들은 열분해온도;257~280˚C, 열전도도;0.95~1.14W/m.K, 열팽창계수 ;0.77~1.26x10-6˚C-1, 연소특성;800˚C이하, 평균연소시간;5초 이하, 평균연소길이 ;5mm 이하, 인장강도;2.5~3.2Kg/mm2,압축강도:13.2~15.2kg/mm2 굴곡강도:5.2~604Kg/mm2 등을 나타냈다. 전반적으로 개발된 중성자 차폐재들의 관련 특성들이 외국에서 사용되는 중성자 차폐재, NS-4-RF보다 우수한 것으로 나타났다. 또한 KNS-601의 내방사선성이 KNS-201과 KNS-301보다 우수한 것으로 나타났다. 또한 KNS-601의 내방사선이 KNS-201과 KNS-301보다 우수한 것으로 나타났다.

In order to investigate the trace metals in Korean foods, the contents of Magnesium, Zinc, Manganese, Molybdenum and Selenium are studied in this paper. As show in the Table 1; a total of 250 samples of 25 species were analyzed by neutron activation analysis. The results obtained were as follows; 1. The overall ranges and mean (mg/100 g) were; Mg, 12.212-151.346 (55.164); Zn, 0.045-38.180 (2.473); Mn, 0.003-0.796 (0.225); Mo, ND-0.035 (0.007); Se, ND-0.069 (0.016). 2. The levels of all metals except Mo in shell fishes were high and the level of Mo in spices .was higher than that in other foods. 3. The levels of Zn and Mo in oyster were higher than another spcies.

We have examined consequences of strong tidal encounters between a neutron star and a normal star using SPH as a possible formation mechanism of isolated recycled pulsars in globular clusters. We have made a number of SPH simulations for close encounters between a main-sequence star of mass ranging from 0.2 to 0.7 M⊙ represented by an n=3/2 polytrope and a neutron star represented by a point mass. The outcomes of the first encounters are found to be dependent only on the dimensionless parameter n'≡ (m/(m＋M))1/2(rmin/RMS)3/2(m/M)(1/6), where m and M are the mass of the main-sequence star and the neutron star, respectively, rmin the minimum separation between two stars, and RMS the size of the main-sequence star. The material from the (at least partially) disrupted star forms a disk around the neutron star. If all material in the disk is to be acctreted onto the neutron star's surface, the mass of the disk is enough to spin up the neutron star to spin period of 1 ms.

Muons and neutrons are representative secondary particles that are generated by interactions between primary cosmic ray particles (mostly protons) and the nuclei of atmospheric gas compounds. Previous studies reported that muons experience seasonal variations because of the meteorological effects of temperature. The intensity of neutrons has a typical modulation with various periods and reasons, such as diurnal and solar variation or transient events. This paper reports that cosmic ray particles, which were observed by neutron monitors, have seasonal variations using the daily data at the Oulu neutron monitor. To eliminate the effects of solar activity across time, the daily data were normalized by two different transformations: transformations with respect to the grand mean and yearly mean. The data after transformation with respect to the yearly mean showed more statistical stability and clear seasonal variations. On the other hand, it is difficult to determine if the seasonal variation results from terrestrial effects, such as meteorological factors, or extraterrestrial effects, such as the position of the Earth in its orbit of revolution.

양성자 치료기의 Passive Scattering System 노즐을 모의모사 하여 노즐 내 각 구성품에서 발생되는 중성자를 에너지별로 평가하였다. MCNPX code를 이용하여 치료환경에 사용되는 양성자 에너지 220 MeV, 도달 거리 20 cm, 6 cm 길이의 SOBP를 구현하고, 치료기 가동 시 발생하는 중성자를 각 구성품에 따라 종류별로 분류하였다. 양성자 가속기 구성품 중 산란체에서 중성자가 가장 높게 발생되었으며 양성자의 중심선 속에서부터 멀어질수록 중성자의 선속은 감소되었다. 본 연구는 양성자 가속기의 유지 보수 및 해체에 필수적인 방사화 평가를 진행하기 위한 기초자료로 활용할 수 있을 것으로 사료된다.

This research is to investigate the effect of borosilicate glass powder on neutron shielding capability of cement mortar. The average particle size of the borosilicate glass powder was 13 μm. It was found that the addition of borosilicate glass powder increased 28 day compressive strength. In addition, neutron shielding capability of cement mortar also increased by the addition of borosilicate glass powder. Considering our earlier findings on enhanced thermal neutron shielding of cement mortar by borosilicate glass powder, the use of borosilicate glass powder was found to be effective to shield neutron when the cement mortar was exposed to the neutron radiation. It can be concluded that borosilicate glass powder is a good alternative material for neutron shielding purposes.

In December 2015, we have installed neutron monitors at the Jang Bogo station in Antarctica. The Jang Bogo station is the second science station which is located at the coast (74° 37.4´S, 164° 13.7´E) of Terra Nova Bay in Northern Victoria Land of Antarctica. A neutron monitor is an instrument to detect neutrons from secondary cosmic rays collided by the atmosphere. The installation of neutron monitor at Jang Bogo station is a part of transferred mission for neutron monitor at McMurdo station of USA. Among 18 tubes of 18-NM64 neutron monitor, we have completed relocation of 6 tubes and the rest will be transferred in December 2017. Currently, comparison of data from the neutron monitors of both two stations is under way and there is a good agreement between the data. The neutron monitors at Jang Bogo station will be quite useful to study the space weather when the installation is completed.

중성자에너지 영역 0.003 eV에서 10 eV에 대해 천연 Sm의 Sm(n,γ) 반응에 대한 중성자 포획단면적을 측 정하였다. 교토대학교 원자로실험소의 46-MeV 전자선형가속기에서 발생되는 전자의 광핵반응에 의한 중 성자를 사용하였고 TOF 방법으로 측정하였다. 사용한 검출기는 12개의 BGO(Bi4Ge3O12) 섬광체로 구성되었 고 이 검출장치로 Sm(n,γ) 반응으로부터 나오는 즉발감마선을 측정하였다. 검출장치는 중성자 생성 위치로 부터 12.7±0.02 m 위치에 설치되었으며 10B(n,αγ)7Li 반응을 이용해 Sm 시료에 입사되는 중성자 선속을 구 하였다. 또한 중성자 선속의 변화를 확인하기 위해 BF3 검출기로 모니터링 하였다. Sm(n,γ) 반응단면적 측 정결과는 BROND 2.2에 의한 평가결과와 J. C. Chou 및 V. N. Kononov 의 측정값과 비교하였다.

While the period of high growth of Japanese economy, infrastructures were actively constructed. Now the structures are aged and its evaluation of integrity is one of significant topics to keep its serviceability and safety in Japan. Although the authors have been studied on tomographic techniques that are on the basis of elastic wave propagation for the evaluation, elastic wave difficultly propagate inside of structures if the structures are covered by stiff materials, e.g. steel reinforcement, and evaluation of integrity of the structures is difficult as consequence. Further, electromagnetic waves have been widely used for the inspection of concrete structures as well. However, dissipation rate of the electromagnetic waves is generally high in metals, and it is also difficult to penetrate inside of the structures. On the other hand, neutron beam is known as a radioactive ray which permeability is high and it would be applicable for the inspection of inside of the concrete structures. Thus, in this study, permeability of neutron beams to concrete specimens is discussed as preliminary study for establishing the inspection technique of concrete structures with neutron beam.