L.P SCR의 촉매 반응을 위해 선박의 발전기용 4행정 디젤엔진의 배기가스 온도를 높게 설계 할 수밖에 없었다. 본 연구의 목적은 밸브개폐시기와 연료분사시기를 조정을 통한 배기가스의 온도 감소가 L.P SCR의 운전조건을 만족시키고 고온으로 인한 발전기 엔진의 사고를 예방하기 위함이었다. 배기가스 온도를 하강시키기 위해 캠샤프트의 각도를 조정하고 연료분사펌프의 Shim을 추가하였다. 그 결과 최대폭발압력은 12.8 bar 증가하였고 터보차저 출구온도 평균값은 13.3 ℃ 하강하였다. 터보차저 출구에서 SCR 입구까지의 열손실을 감안하더라도 L.P SCR 운전조건인 SCR 챔버 입구 온도인 290 ℃를 만족하였다. 배기가스 온도 하강을 통해 디젤발전기의 안전운전이 가능하게 한 연구였다.

In this study, in order to manufacture STS 316L seamless pipes with 18mm, 25mm, and 42mm diameters that can be used for high pressure, we intend to make predictions through design and finite element analysis and produce real objects. It was measured to have the highest hardness value in the deformed part, and it is expected to be due to work hardening. It has been interpreted that plastic deformation does not occur up to 1,000bar for STS 316L seamless pipes with a diameter of 18mm and 25mm, but plastic deformation occurs at 900bar or more in STS 316L seamless pipes with a diameter of 42mm.

The study was conducted to investigate how changes in the internal compliance and stiffness of the blood vessels affect the changes in blood pressure and systolic peak time using the RLC Windkessel Model, a secondary blood vessel model of the brachial artery. For this purpose, each component coefficient for blood pressure waveforms of people before and after surgery and before and after drug treatment was estimated. And the expression time of systolic peak time was measured when the elastic value that can affect the change of the waveform of blood pressure change was changed, and the relationship between elasticity and systolic peak time was derived by regression method. It was confirmed that elasticity was affected by the peak time of systolic period, but it did not affect the size of blood pressure. The study was conducted to determine how inertance affects blood pressure, and blood pressure pulse wave was measured before and after heart transplant, and blood pressure pulse wave was measured before and after medication. R, L, and C components of Windkessel models were estimated in blood pressure waveforms. The factors that affect the increase of blood pressure and the decrease of systolic peak time were due to the increase of L component in the RLC component.

PURPOSES : This study was conducted to evaluate the performance of pressure relief joints (PRJs) installed on highways for preventing blow-ups. METHODS : To evaluate the performance of a PRJ, pavement surface images were acquired by conducting a follow-up survey through on-site visual inspection and an automated pavement condition survey. The PRJ widths in the acquired pavement images were measured using image analysis software, and major distress in the PRJ was identified. The relationship between the performance period and the joint width was bi-linearized, and the causes of distress and repair methods for PRJ were suggested. RESULTS : As a result of the first survey, it became known that the width of a PRJ rapidly decreases after installation owing to an expansion of the concrete slab. The width of a PRJ continued to decrease, with 94% of the joint below 30 mm and 64% of the joint being below 10 mm, based on the fourth survey. The PRJ width of an Alkali-Aggregate Reaction (AAR) section decreased more than that of a normal section, but the difference in the average width between both sections decreased from 9.7 mm to 2.7 mm over the measured period. A bilinear estimation equation was developed based on the survey data. Through the estimation equation, it could be confirmed that joint contraction accelerated after installation owing to the effects of AAR, and that the joint widths of both sections converged to a similar level over the measurement period. As the result of the major distress analysis indicates, joint seal failure occurred in 70% of the joints, and the distress rates in terms of cracks, edge breakouts and spalling, and patching were 73%, 57%, and 28%, respectively. CONCLUSIONS : With the follow-up survey it could be confirmed that the concrete slab continued to expand despite seasonal changes, maintenance of the PRJ, and additional installation of new PRJs. The expansion of the concrete slab due to AAR is considered to be closely related to PRJ behavior. In addition, it is judged that major distress of the PRJ occurs at an early age owing to the instantaneous release of excessive compressive stress inherent in the slab during joint cutting.

화석연료의 사용은 대기가 오염되어 지구온난화와 이상기후 등의 문제를 야기하고 있다. 우리나라는 탄소 배출량을 줄이기 위하여 신재생에너지 개발에 관심이 집중되었고, 신재생에너지에 관한 정책 중 ‘그린 홈 100만호 보급사업’을 통해 일반 주택에 태양 광 발전기 보급이 확대되었다. 태양광 발전기는 외부에 노출되어 있어 직접적으로 태풍과 같은 강풍에 영향을 받게 된다. 따라서 보급 이 확대된 만큼 피해사례도 증가하고 있다. 본 연구에서는 태양광 발전기의 안전한 내풍설계를 위하여 주택설치 용량에 부합하는 태양광 발전기 형태를 특정하여 풍동실험을 진행하였다. 태양광 발전기의 모듈을 동일 면적의 정사각형(3 by 5 어레이), 직사각형(5 by 3 어레이)으로 배열하고 설치 각도를 30°, 35°, 40°로 하여 변수에 따른 풍압분포와 피크순압력계수를 산출하였다. 전체적으로 설치 각도가 증가할수록 값은 줄어들었으며 어레이 상부 모서리에서 상방향, 하부 모서리에서 하방향의 피크순압력계수가 지배적이었다. 또한 대체로 정사각형(3 by 5 어레이)보다 직사각형(5 by 3 어레이)의 배열이 바람에 더 불리한 것으로 나타났다.

페로브스카이트 태양전지는 빠른 속도로 효율 개선이 이루어지며 차세대 친환경 에너지원으로 각광받고 있다. 가공 매개변수의 영향을 강하게 받는 유-무기 혼합 페로브스카이트 태양전지에서 고품질의 광 활성층을 제조하는 것은 매우 중요하다. 본 연구에서는 Methylammonium Lead Iodide(MAPbI3) 광 활성층 제작 시, 결정화가 이루어지는 열처리 과정에서 압력을 가함으로써 용매가 증발하는 속도를 조절할 수 있는 가압열처리 공정방법(pressure assisted annealing process, PA method)을 개발하였다. 본 연구에서 개발한 광 활성층 제조방법은 보다 오래 용매를 활성층 내에 머물게 할 수 있어서 MAPbI3의 중간단계에서 그레인의 성장을 극대화 할 수 있으며, 이를 통해 고품질 페로브스카이트 광 활성층의 제조를 가능하게 한다. 또한 본 가압열처리 방법으로 형성시킨 페로브스카이트 광 활성층을 도입하여 태양전지를 제조하였을 경우, 소자의 최고 성능은 기존의 방법으로 제조된 소자와 비교하여 24.4 mA cm-2의 높은 단락 전류밀도, 0.96 V의 개방전압, 0.75의 필 팩터를 나타내며 17.3 %의 에너지 전환효율을 나타내었다.

In this study the characteristics of wind pressure that are depending on the open type of retractable dome roof were analyzed according to the wind pressure coefficient and wind pressure spectrum. The analysis results showed that the open type and shape of the roof both had a significant impact on the wind pressure changing. In case of the edge to center open type, the wind pressure has not changed much because of the complex turbulence of flow and open area. On the other hand, in case of the center to edge open type, it has confirmed that wind pressure increases due to the separation of flow in windward and open area.

Background: Although symmetry of spatio-temporal parameter and center of pressure (COP) shift during walking is associated with knee adduction moment, research on clinical association with knee osteoarthritis (OA)-related knee pain and functional scores is lacking. Objects: The aims were 1) to compare symmetry of gait parameters and COP-shift in patients with unilateral knee OA and pain and matched controls, and 2) to investigate the relationship between symmetry of gait parameters and COP-shift, and clinical measures. Methods: Female subjects (n = 16) had with unilateral radiological knee OA and pain. Healthy controls (n = 15) were age-matched to OA group. Symmetry of foot rotation, step length, stance and swing phase, lateral symmetry of COP and anterior/posterior symmetry of COP during walking was assessed. To assess the clinical variables, pain intensity, pain duration and function using Knee Osteoarthritis Outcome Survey (KOOS) subscales were collected. We compared symmetry between groups using Mann–Whitney U-test or independent t-test. Relationships between clinical measures and symmetry index measured using Spearman’s correlation test. Statistical significance was set at α = 0.05. Results: Knee OA group showed significantly greater values of only lateral symmetry of COP (p < 0.01) than healthy group. Values of lateral symmetry of COP had moderate or strong correlation significantly with the intensity of knee pain, pain duration, and scores of all KOOS subscales (p < 0.01). Conclusion: Patients with unilateral knee OA and pain showed more asymmetry of lateral COP-shift during walking compared with matched healthy controls. In addition, larger asymmetry of lateral COP-shift has the moderate or strong association with worse of knee pain, worse in KOOS scores and longer duration of knee pain. Asymmetry of lateral COP-shift during walking may be one of the characteristics of unilateral knee OA as the compensatory strategy response to unilateral OA of the knee.

Background: A pressure ulcer is common in soft tissue over the greater trochanter (GT) in side-lying position, and sustained tissue deformation induced by the prolonged external force is a primary cause, which can be discussed with soft tissues’ viscoelastic properties (i.e., stress relaxation, creep response). Objects: Using an automated hand-held indentation device, we measured the viscoelastic properties of soft tissue over the hip area, in order to examine how the properties are affected by site with respect to the GT. Methods: Twenty participants (15 males and 5 females) who aged from 21 to 32 were participated. An automated hand-held indentation device was used to measure the stress relaxation time and creep response. Trials were acquired for three different locations with respect to the GT (i.e., right over the GT, 6 cm anterior or posterior to the GT). For each location, five trials were acquired and averaged for data analyses. Results: Soft tissues’ stress relaxation time and creep response were associated with site (F = 23.98, p < 0.005; F = 24.09, p < 0.005; respectively). The stress relaxation time was greatest at posterior gluteal region (19.22 ± 2.49 ms), and followed by anterior region (15.39 ± 2.47 ms) and right over the GT (14.40 ± 3.18 ms). Similarly, creep response was greatest at posterior gluteal region (1.16 ± 0.14), and followed by anterior region (0.95 ± 0.14) and right over the GT (0.89 ± 0.18). Conclusion: Our results showed that the stress relaxation and creep were greatest at the posterior gluteal region and least at right over the GT, indicating that the gluteal soft tissue is more protective to the prolonged external force, when compared to the trochanteric soft tissue. The results suggest that a risk of pressure ulcer over the GT may decrease with slightly posteriorly rotated side-lying position.

We study galaxies undergoing ram pressure stripping in the Virgo cluster to examine whether we can identify any discernible trend in their star formation activity. We first use 48 galaxies undergoing different stages of stripping based on Hi morphology, Hi deficiency, and relative extent to the stellar disk, from the VIVA survey. We then employ a new scheme for galaxy classification which combines Hi mass fractions and locations in projected phase space, resulting in a new sample of 365 galaxies. We utilize a variety of star formation tracers, which include g - r, WISE [3.4]-[12] colors, and starburstiness that are defined by stellar mass and star formation rates to compare the star formation activity of galaxies at different stripping stages. We find no clear evidence for enhancement in the integrated star formation activity of galaxies undergoing early to active stripping. We are instead able to capture the overall quenching of star formation activity with increasing degree of ram pressure stripping, in agreement with previous studies. Our results suggest that if there is any ram pressure stripping induced enhancement, it is at best locally modest, and galaxies undergoing enhancement make up a small fraction of the total sample. Our results also indicate that it is possible to trace galaxies at different stages of stripping with the combination of Hi gas content and location in projected phase space, which can be extended to other galaxy clusters that lack high-resolution Hi imaging.

The change in the open porosity of bulk graphite as a function of the uniaxial molding pressure during manufacturing is studied using artificial graphite powder. Subsequently, the graphite is impregnated to determine the effect of the open porosity on the impregnation efficiency and to improve the density of the final bulk graphite. Bulk graphite is manufactured with different uniaxial molding pressures after mixing graphite powder, which is the by-product of processing the final graphite products and phenolic resin. The bulk density and open porosity are measured using the Archimedes method. The bulk density and open porosity of bulk graphite increase as the molding pressure increases. The open porosity of molded bulk graphite is 25.35% at 30 MPa and 29.84% at 300 MPa. It is confirmed that the impregnation efficiency increases when the impregnation process is performed on a specimen with large open porosity. In this study, the bulk density of bulk graphite molded at 300 MPa is 11.06% higher than that before impregnation, which is the highest reported increase. Therefore, it is expected that the higher the uniaxial pressure, the higher the density of bulk graphite.

이 연구는 GFRP관을 상수도관으로 사용하기 위해 테스트베드를 설치하여 지중매설된 관의 구조적 거동에 미치는 영향을 조사하였다. 또한, GFRP관의 역학적 성질을 조사하고 관 강성을 추정하였다. KS규격에서 제시하고 있는 허용드로우와 고압력(사용압력의 1.5∼2.0배), 트럭하중을 적용시켜 관 내부와 외부의 복합하중이 작용할 경우 관 내압의 변화와 관의 거동을 확인하였다. 그 결과, 상수관으로 GFRP관을 장기 사용하여도 충분한 내압을 가지고 있음을 확인하였다.

플랜트 증기운 폭발은 TNT 폭발물에 의한 폭발과는 다른 특징이 있으며 압력파 양상과 비슷하다. 대표적인 유형의 폭압 산정법은 TNT 등가량 환산법과 멀티에너지법이 있다. TNT 등가량 환산법은 폭굉과 같은 충격파를 전제로 하며, 멀티에너지법은 폭연과 같은 압력파를 전제로 한다. 본 연구는 세 가지 플랜트 폭발 사례를 적용하여 플랜트 증기운 폭발의 적절한 폭압을 도출하기 위한 연구를 수행하였다. 폭발 사례에 대하여 피해를 입은 부재를 선정한 후, 단자유도 해석과 비선형 동적 해석을 수행하여 변형과 손상 정도를 비교 분석하였다. 구조물의 피해 정도는 TNT 등가량 환산법보다는 멀티에너지법에 의한 폭압을 사용한 경우가 실제 상황에 더욱 근접한 것으로 나타났다. 또한, 멀티에너지법의 폭발강도계수를 7 또는 8로 가정할 경우 증기운 폭발의 폭압 모델을 비교적 정확하게 산정할 수 있을 것으로 판단된다.

In this study, a method of leakage detection was proposed to locate leak position for a reservoir pipeline valve system using wavelet coherence analysis for an injected pressure wave. An unsteady flow analyzer handled nonlinear valve maneuver and corresponding experimental result were compared. Time series of pressure head were analyzed through wavelet coherence analysis both for no leak and leak conditions. The leak information can be obtained through either time domain reflectometry or the difference in wavelet coherence level, which provide predictions in terms of leak location. The reconstructed pressure signal facilitates the identification of leak presence comparing with existing wavelet coherence analysis.

In order to satisfy the strengthening automobile exhaust gas regulation and CO2 regulation, the development of eco-friendly vehicles is actively progressing. To cope with these regulations, research on alternative fuel vehicles is being actively conducted. Alternative fuels are one of the best ways to reduce dependence on fossil fuels and respond to emissions and CO2 regulations. Natural gas, one of many alternative fuels, contains methane (CH4) as a main component and has abundant reserves, so it is attracting attention as a fuel that can provide stable long-term supply by replacing fossil fuels. In addition, natural gas has a high octane number, so there is room for improvement in combustion characteristics when used in SI engines, and it has the advantage of reducing harmful emissions and carbon dioxide (CO2) compared to conventional fossil fuels. When using a low-pressure injector in a turbo engine, it is difficult to secure the flow rate of fuel because the pressure difference between the injector and the manifold is small. Therefore, it is necessary to develop a high-pressure injector to improve this. Natural gas is a gaseous fuel and should be developed in consideration of compressible flow, Although the use of a CNG high-pressure injector is required, it is difficult to stabilize the flow due to the Mach disk and shock wave interference caused by compressible flow. If the flow is not stabilized, it is difficult to precisely control the flow. Therefore, it is necessary to develop an injector in consideration of flow characteristics. In this paper, the flow analysis according to the shape change of the injector was conducted to improve the fuel flow rate injected from the 800 kPa high pressure CNG injector.

High-pressure membrane system like nanofiltration(NF) and reverse osmosis(RO) was investigated as a part of water treatment processes to produce high quality potable water with low organic matter concentration through membrane module tests and design simulation. River water and sand filtration permeate in Busan D water treatment plant were selected as feed water, and NE4040-90 and RE4040-Fen(Toray Chemical Korea) were used as NF and RO membranes, respectively. Total organic carbon(TOC) concentrations of NF and RO permeates were mostly below 0.5 mg/l and the average TOC removal rates of NF and RO membranes were 93.99% and 94.28%, respectively, which means NF used in this study is competitive with RO in terms of organic matter removal ability. Different from ions rejection tendency, the TOC removal rate increases at higher recovery rates, which is because the portion of higher molecular weight materials in the concentrated raw water with increasing recovery rate increases. Discharge of NF/RO concentrates to rivers may not be acceptable because the increased TDS concentration of the concentrates can harm the river eco-system. Thus, the idea of using NF/RO concentrate as the raw water for industrial water production was introduced. The design simulation results with feed water and membranes used in this work reveal that the raw water guideline can be satisfied if the recovery rate of NF/RO system is designed below 80%.

본 연구에서는 CH4/CO2 혼합가스에서 CO2 분리를 위해 세라믹 중공사 접촉막 모듈(HFMC)을 이용하여 실험을 수행하였다. 고 내구성의 HFMC를 제작하기 위해, 고강도의 중공사막을 제조하여 평가하였다. 제조한 중공사막을 이용하여 HFMC를 제작하였고, 실험은 CH4/CO2 혼합 기체(30% CO2, CH4 balance)와 monoethanolamine (MEA)를 사용하였다. HFMC 운전 중 기체와 흡수제의 압력이 CO2 제거 효율에 어떠한 영향을 주는지 평가하였다. CO2 제거 효율은 기체압력이 증가함에 따라 같이 상승하였으며, CO2 흡수 flux 또한 액체유량과 함께 증가하는 추세를 보였다. 또한 CO2 흡수율이 40% 이하일 때 는 흡수제가 아래쪽에서 들어가는 향류형태인 LTS-1이 흡수제가 위쪽에서 들어가는 향류형태인 LTS-2보다 CO2 제거 성능 이 높았으며, 흡수율이 40% 이상일 때는 LTS-2가 LTS-1보다 성능이 높았다.

Background: Patients with low back pain (LBP) experience misalignments in the center of pressure (COP) and muscle imbalances due to frequent onesided posture adjustments to avoid pain. Objectives: To identify the effects of Squat Exercises with Vertical Whole-Body Vibration on the Center of Pressure and Trunk Muscle Activity. Design: Randomized controlled trial. Methods: Thirty LBP patients with an imbalance in the COP were sampled and randomly assigned to an experimental group of 15 patients who under went an intervention involving squat exercises with vertical WBV and a control group of 15 patients who were treated via a walking intervention. As pretests before the interventions, the subjects’ COP was identified by measuring their stability index (ST), and erector spinae, rectus abdominis, transverse abdominis, gluteus medius muscle activity was analyzed by determining the % reference voluntary contraction (%RVC) value using surface electromyography while sit to stand. After four weeks, a post test was conducted to remeasure the same variables using the same methods. Results: Statistically significant differences were found in the ST (P<.01) and trunk muscle (P<.05, P<.001) in the experimental group before and after the intervention. In terms of the differences between the left- and right-side (RL) muscle activity, only the transverse abdominis (TrA) and gluteus medius (GM) exhibited statistically significant increase (P<.05). A comparison of the groups showed statistically significant differences in the TrA with respect to muscle activity (P<.05) and in the RLTrA and RLGM in terms ofthe difference between left- and right-side muscle activity (P<.01). Conclusion: Squat exercises with vertical WBV produced effective changes in the COP of patients with LBP by reducing muscle imbalances through the delivery of a uniform force. In particular, strengthening the TrA and reducing an imbalance in the GM were determined to be important factors in improving the COP.

The fluctuating wind pressure of the low rise ratio(f/D=0.1) for the elliptical dome roof was analyzed to compare it with the previous studies of circular dome roofs. Wind tunnel test were conducted on a total of 10 wind directions from 0° to 90° while changing wall height-span ratios(H/D=0.1-0.5). For this, meanCP, rmsCP and wind pressure spectrum were analyzed. The analysis result leads to find differences in the shape of the spectra in the spanwise direction and leeward of the elliptical dome according to the wind direction variations of the elliptical dome roof.