다중 하중 과도응답해석은 시간에 따른 작용 하중에 대한 과도응답을 확인하므로 정교한 시스템 모델링 및 조밀한 시간 간격을 가 질수록 해당 시스템에 대한 동특성은 정확하게 나타내지만 이에 따른 계산 시간은 크게 증가하게 된다. 크리로프 부공간 기반 모델차 수축소법은 기계 시스템이 가지는 동적 특성과 거의 동일한 결과를 나타내면서 계산 시간을 줄일 수 있기 때문에 효율적인 과도응답 해석 방법이다. 본 연구에서는 다중 하중 및 이동 하중을 가지는 수치 예제를 통하여 크리로프 부공간 모델차수축소법 기반 과도응답 해석을 수행하고, 이를 통해 초기 시스템 및 축소차수 모델의 정확성 및 효율성을 비교하였다. 또한, 시스템 행렬 추출, 크리로프 부공 간의 기저 벡터로 구성되는 변환행렬 생성 및 축소차수모델 생성 그리고 이를 바탕으로 과도응답해석을 하는 절차를 수립하여 상용 유한요소 프로그램인 ANSYS Workbench ACT를 통해 과도응답해석 과정 자동화를 구현하여 그 효용성과 효율성을 보였다.

This paper examines the trend of restructuring and direction of management response in the Large Purse Seine Fishery. The large-scale fishing industry is one of the most popular fishing areas in the coastal area, and it has been developed by providing exclusive supplies of many types of catchy fish, such as mackerel and horse mackerel through physical productivity in fleet operations. However, the Large Purse Seine Fishery has been declining in profitability due to the deterioration of the business environment since 2000. It is at a crossroads whether it will disappear or regenerate as it is. The Large Purse Seine Fishery's current problems are: firstly, the continued deterioration of the fishery business balance and worsening labor problems, secondly, insufficient freshness management and quality control after landing, and thirdly, import competition. The fourth is the intensification of the market competition, which is the evolution of fishing variability and the increase in the proportion of small fish. The fifth is the reduction of the operating fishing ground due to the suspension of mutual fishing in Korea and Japan. To address these problems and suggest management response directions for the survival of large-scale fishing businesses is as follows. First, a sustainable production system should be established through strengthening resource management and promoting international fisheries cooperation. Second, the profitability of fishing management should be improved by introducing a low-cost supplier system and securing a stable labor force. Third, we should improve the leading and quality control of catch, improve the high value-added value of catch through brand development, and secure competitive advantage with imported produce. Finally, the government should establish a cooperative system among private sector, government, and research institutes to push ahead with these tasks and strengthen the competitiveness of the front and rear industries.

In this study, TMD(Tuned Mass Damper) is installed in a retractable-roof spatial structure in order to investigate dynamic response characteristics according to mass ratio and installed position of TMD on large spatial structures. The example analytical model is generated based on the Singapore sports hub stadium. Twenty eight analytical models are used to investigate optimal installation position of TMD for the example retractable-roof spatial structure using 4 to 16 TMDs. The mass of one TMD is set up 1% of total mass at the example analytical model. Displacement response ratio of model with TMD is compared with that of base model without TMD. It has been found from numerical simulation that it is more effective to install TMD at the edge of the spatial structure rather than to concentrate the TMD at the center of the spatial structure.

The outrigger damper system is a structural system with excellent lateral resistance when a wind load occurs. However, research on outrigger dampers is still in its infancy. In this study, dynamic response control performance of damper is analyzed according to change of stiffness value and damping value of damper. To do this, a real-scale 3D model of 50 stories has been developed and the artificial wind load has been entered for dynamic analysis. Generally, the larger the damping value, the smaller the stiffness value is, the more effective it is to reduce the maximum displacement and acceleration response. However, the larger the attenuation value as the cost of construction increases, it is necessary to select appropriate stiffness and damping value when applying an outrigger damper.

In this study, Stockbridge damper was adopted to reduce the reponses of structures under earthquakes. A finite element analysis software, SAP2000, was used to simulate the structural response and the control device under dynamic loads. A 3 story frame model and the proposed control device, Stockbridge damper, were designed under laboratory conditions. In this research, a pendulum type tuned mass damper (PTMD) was also adopted in order to compare with the Stockbridge damper. Harmonic loads were applied to verity the control performance of both control devices in each mode. In results, it has been found that the Stockbirdge damper decreases significantly the responses of the structure more than the PTMD under the harmonic loadings. The El Centro and Northridge earthquakes were also applied in order to investigate the performance by both control devices. The responses of the building demonstrate that the Stockbridge damper reduces the response of the building structure during earthquakes more effectively than the PTMD.

In this study, the wind response characteristics of a transmission tower are investigated through stochastic analysis considering the dynamics of a transmission line, The assemblage of the transmission line and insulator are modeled as a double pendulum system connected to the SDOF model of the tower. It is observed that the background component of the overturing moment induced by the wind response of the transmission line has considerable portion in the total overtuming moment. Based on this observation, a rotational viscoelastic damper is proposed for the suppression of the transmission line response to reduce wind load on the transmission tower. To verify the effectiveness of the proposed damper, time history analysis is conducted for various wind velocities. From the result of the analysis, the proposed damper is proved to be effective in the reduction of the background component rather than the resonance component of the support reaction of the transmission line.

Response surface analysis was used to study dietary ratios of n-3/n-6 fatty acid and P/S to minimize plasma triglycerides, total cholesterol and LDL · VLDL-C levels and maximize plasma HDL · C levels of rats. Because the dietary components were not statistically independent, they were studied in combinations of two variables. The two-variable combinations were the most useful in locating the desired maximum or minimum plasma triglycerides, total cholesterol and LDL · VLDL-C response in terms of the proportions of the dietary components. Response surface contours and three dimensional plots were developed for each plasma lipid response. The contours and three dimensional plots were used to help determine those combinations of the dietary fatty acid ratios that would produce the desired minimum or maximum lpid responses. The statistical analyses indicated that the minimized plasma cholesterol response levels could be attained with a diet consisting of 2.26 n-3/n-6 fatty acid and 2.15 P/S ratios.

Even though the need for application of damping devices is being raised even in Korea, the design process for damping system is usually performed without considering not only if the design base shear has been reduced in proper ratio, but also if the response reduction due to the application of the damping device has been actually occurred. In this research, response reduction effect was checked as a reduced base shear force, energy approach, and logarithmic decrement approach for the bearing wall apartment buildings with fluid damper.

구조 재료와 시공기술의 발달로 구조물은 높고 길게 설계할 수 있게 되었으나, 그에 따른 진동문제와 사용성에 관한 문제가 발생하였고, 구조물의 과다한 변위는 구조물에 심각한 손상을 발생시켰다. 이러한 구조물의 진동 문제를 해결하기 위하여 본 논문에서는 구조물의 상태벡터와 제어력만으로 구성된 훈련패턴을 기본으로 하여 인공신경망이론과 확률신경망이론을 사용하여 구조물의 진동을 능동제어하는 방법을 제안하였다. 구조물의 제어를 위해 LQR 제어알고리즘을 이용하여 구조물의 상태벡터와 제어력을 구한 후, 상태벡터를 입력으로 제어력을 출력으로 하는 인공신경망과 확률신경망의 훈련패턴을 구성하였다. 제안된 방법을 사용하여 Northridge 지진하중을 받는 3층 빌딩구조물을 제어하였고, 제안된 인공신경망과 확률신경망의 제어 결과를 비교하였다.

We study on the dynamic interaction with a simulated physical-biological coupled model response to nutrient reduction scenario in Jinhae Bay. According to the low relative errors, high regression coefficients of COD and DIN, and realistic distribution in comparison to the observation, our coupled model could be applicable for assessing the marine ecosystem response to nutrient input reduction in Jinhae Bay. Due to the new construction and expansion of sewage treatment plant from our government, we reduce 50% nutrient inputs near Masan Bay and sewage treatment plant. COD achieves Level Ⅱ in Korea standard of the water quality from the middle of the Masan Bay to all around Jinhae Bay except the inner Masan Bay remaining at Level Ⅲ. When our experiment reduces 50% nutrient inputs near Masan Bay and Dukdong sewage treatment plant simultaneously, COD decreases to about 0.1-1.2 mg/L (128°30’~128°40’ E , 35°05’~35°11’ N). The COD from the middle of the Masan Bay to Jinhae Bay achieves Level Ⅱ.

In the country where the population concentrates in the metropolis with the narrow land, development of the ocean space is necessary. Recently, mega-float offshore structure has been studied as one of the effective utilization of the ocean space. And very large floating structures are now being considered for various applications such as floating airports, offshore cities and so on. This very large structure is relatively flexible compared with real floating structures like large ships. when we estimate dynamic responses of these structures in waves, the elastic deformation is important, because vertical dimension is small compared with horizontal. And it is necessary to examine the effect of ocean wave external force received from the natural environment. In this study, the mat-type large floating structure is made to be analytical model. And the analysis of the dynamic response as it receives regular wave is studied. The finite element method is used in the analysis of structural section of this model. And the analysis is carried out using the boundary element method in the fluid division. The validity of analysis method is verified in comparison with the experimental result in the Japan Ministry of Transport Ship Research Institution. In order to know the characteristics of the dynamic response of the large floating structures, effects of wavelength, bending rigidity of the structure, water depth, and wave direction on dynamic response of the floating structure are studied by use of numerical calculation.