Aerial work platform truck is used in various ways depending on the surrounding environment, of city roads, farming areas, and industrial sites. Air flow, drag force and torque in surroundig the flow field of AWP have been analyzed with CFD method. The overall air flow rate decreases as the AWP passes and increases between the vehicle and the boom, at the boom connections, and at the bottom of the work platform. The drag force and torque on the boom, workspace, and the combined boom and workspace are largely affected by air flow velocity. The boom's drag and torque are approximately 2.2 and 1.3 times greater than those of the work platform, respectively. These predicted results can be widely applied as basic conceptual design data for highly efficient aerial work platform truck.

Since electric energy is used in industry, mass production and various conveniences are provided. To provide convenience for the construction and operation of such electric energy transmission and distribution facilities, it is increasing that the demand for special purpose vehicles, that is, telescopic aerial work platform vehicles. When working active electric work using the telescopic aerial work platform vehicles, due to active electric work is inevitable, it is essential to ensure insulation performance for the safety of the operator. In this paper, we study the design and development of mechanical properties for filament winding process of glassfiber/epoxy composite, it is required to boom of telescopic aerial work platform vehicles. The glass fiber/epoxy composite filament winding process and its mechanical properties were evaluated to replace the existing ATOS80 boom. By filament winding process it was obtained the mechanical properties required for the design analysis of the glass fiber/epoxy composite boom. Using this, the insulated boom for the 30m class aerial work vehicle was designed and was manufactured by applying the filament winding process. The fabricated composite boom was evaluated by the static strength test to meet the required strength. The maximum displacement was 84mm and the crack occurred at the maximum load of 8981N. It satisfied the maximum lifting load of 4900N and 210mm the maximum displacement required for the boom.