본 연구에서는 Froude 수 1.0, 길이 약 10 m 급 소형 고속선의 저항성능과 승선감을 향상시키기 위해 선미 끝단에 트림 탭을 부착하여 항주자세를 제어하였고, 트림 탭의 제원에 따른 성능을 확인하기 위해 CFD 해석을 수행하였다. 먼저 선행 연구로부터 수치 해석이 수행되는 스케일에 따라 결과에 차이가 있는 것이 확인되었고, 이를 피하고자 실선 스케일에서의 해석을 수행하였다. 부착된 트림 탭의 코드 길이는 LPP의 0.5, 1.0, 1.5 %였으며, 선저 면과의 각도는 5 간격으로 변화를 주었다. 트림 탭은 선박의 선미트림과 부상량을 감소시키는 효과가 있었으며, 이 효과는 트림 탭의 선저 면과의 각도가 클수록, 코드 길이가 길수록 증가하였다. 이로 인해 압력 저항은 감소하고 전단저항은 증가하였으며, 두 성분의 변화량에 따라 전 저항 저감율이 결정되었다. 결과로부터 대상 선박의 최적 항 주자세는 약 1.5 의 선미트림으로 특정되었고, 이때 저항성능은 약 27 % 개선되었다.

본 연구에서는 Froude 수 1.0으로 운항하는 길이 약 10m 급 소형 고속선박의 에너지 효율 설계를 위해 선미부에 트림 탭을 부착하였고, 선저 면과의 각도에 따른 항주자세와 저항성능의 변화를 살펴보았다. 성능 해석은 CFD 해석을 통해 수행되었으며, 축척에 의한 영향을 보기 위해 모형선과 실선에 대해 각각 해석을 수행 후 두 결과로부터 예측된 실선의 성능을 비교하였다. 나선에 대한 해석 결과는 두 결과가 전반적으로 유사하였고, 트림 탭이 부착된 경우 선저 면과의 각도가 동일할 때 자세 변화량이 달라 전 저항의 차이로 이어졌지만 자세에 따른 저항 변화 경향은 유사하였다. 이로부터 축척 효과가 있더라도 저항 저감 경향으로부터 최적 항주자세를 찾을 수 있으나, 트림 탭에 의한 자세 변화와 실선 주위 유동의 특성을 알기 위해서는 실선에 대한 직접적인 해석이 필요함을 알 수 있다.

인천 대교는 인천국제공항과 송도국제도시를 연결하는 길이 21.38km, 경간 800m의 대형 교량으로 시간당 73.8(vessel/hour)척의 선박이 통항하고 있다. 본 연구에서는 인천대교 주식회사에서 인천대교 건설 시 설계된 인천대교 충돌방지공의 안전기준을 바탕으로 인천대교를 통항하는 선박의 중량에 따른 안전한 통항 속력을 제시하기 위하여 AASHTO LRFD에 의한 선박 충돌에너지와, 선박 충돌 속도, 수리동적질량계수를 고려하여 통항 선박의 안전..

Fishing efficiency of a trawl vessel can be enhanced by increasing the swept area per unit time, which can be attained either by increasing the mouth size of the net, or by increasing the towing speed. To improve fishing and fuel efficiency of trawl vessels targeting fishes of greater mobility, in which the towing speed is more critical in determining fishing efficiency, we conducted a series of model tests to evaluate the performance of the newly-designed nozzle propeller before installing it in a trawl vessel to verify its towing speed and fuel efficiency in the sea. By conducting further model tests in the experimental basin, we redesigned the propeller of stern trawler to improve the resistance and propulsion performance. Through actual fishing operations, we evaluated the improvement in fuel and fishing efficiency by installing the new nozzle propeller. The trawling speed increased by 0.6kts at the same engine power (RPM), while the engine margin increased by more than 20%. The increased towing speed by installing the redesigned propeller is expected to enhance fishing performance through increasing the number of hauling- and casting operations per unit times, while shortening the towing duration. Analysis of the Catch-Per-Unit-Effort (CPUE) data indicated that the mean CPUE of trawl fishery increased from 3.04kg/m in year 2007 to 6.15kg/m in year 2008, confirming enhanced fishing efficiency by adopting the redesigned propeller.

In spite of many efforts, in the design of high speed fishing vessel the sea-keeping performance improvement without neglection of resistance-propulsion performance by hull form itself has its limitations. In this paper, the development of sea-keeping improving appendage pitching and trim improver for high speed planing hull on behalf of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test and also has been proved the better resistance performance in the model test and full scale test.

TPI는 고속 활주선의 소음, 진동, 트림 및 핏칭운동을 감소시킨 것으로 실선 시운전에서 증명되었다. 또한 모형시험에서 저항성능도 미소하게나마 개선시킨 것으로 입증되었다

활주선 선형을 갖는 고속어선의 저항특성을 체계적으로 연구하기 위한 제 1단계로서 단면형상 및 장-폭비와 저항특성과의 관계에 대한 실험적 연구를 수행하였다. 본 연구는 새로운 고속 활주형 어선을 개발하기 위한 초기연구로서 다음의 내용을 포함하고 있다. - 4가지 단면형상에 대한 저항 특성 - 4가지 장-폭비에 대한 저항 특성

The displacement Deep-V catamaran concept was developed in Newcastle University(UNEW) through development of the systematic Deep-V catamaran series. One of the most important Deep-V catamaran launched to date is Newcastle University's own multi-purpose research vessel, The Princess Royal. The vessel was launched in 2011 and enhanced the Deep-V catamaran concept further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. It was however identified that the vessel has substantial amount of dynamic trim that limited the visibility of the captain. The dynamic trim also increased the wave-making resistance thereby preventing the vessel from attaining its maximum speed in certain sea states. This paper therefore presents the application of devices such as Trim Tabs, Interceptors, Transom Wedges and Integrated Transom Wedges-Tabs to control the dynamic trim and improvement of fuel efficiency of the vessel. All of these energy saving devices were fitted into a model for tests in Newcastle University's Towing Tank. Model test verification confirmed that the optimum appendage was the interceptors, they produced a 5% power saving and 1.2 degree trim reduction at 15 knots, and investigations of full scale trials will be scheduled with and without application of device to compare the improvement of performance.

The effect of the submerged high speed vessel on the ocean wave is made clear in the point of hydrodynamics view. In connection to the design of high speed ship, the flow analysis is carried out to predict the pressure distribution for drag and lift. The purpose of the research is to help the preliminary design of the economic hull form advancing under the ocean wave by estimating the resistance performance and the wave behaviour. In the present study, more efficient numerical approaches are investigated for the viscous flow analysis around a submerged NACA0012 hydrofoil with the laminar and incompressible fluid. Through the numerical simulation, it is found that the new numerical method becomes more efficient primarily due to the fact that the wave elevation is reasonably developed.

The advanced researches of the ship's motion in the seaway can predict the heaving, pitching and slamming of ship's motion. The researches as of today are that of displacement type such as a small typical fishing boat and U, UV and V bow ship forms under low speed. In recent day, the study of behaviours of high speed planning boat in the regular waves has been carried out by Bessho [5]. The calculation about behaviours of a high speed vessel in the longitudinal regular waves is calculated by Ordinary Strip Method in this paper. The data of the results were discussed and compared with Bessho's results. The conclusions deduced from this study are as follow, (1) The acceleration of motion calculated by the O.S.M. is similar with Bessho's data for the Fn 0.5 (2) The amplitudes of the behaviours of motions take peak at 1.0<λ/L<1.4.

The advanced researches of the ship's motion in the seaway can predict the heaving, pitching and slamming of ship's motion. The researches as of today are that of displacement type such as a small typical fishing boat and U, UV and V bow ship forms under low speed. In recent day, the study of behaviours of high speed planning boat in the regular waves has been carried out by Bessho [5]. The calculation about behaviours of a high speed vessel in the longitudinal regular waves is calculated by Ordinary Strip Method in this paper. The data of the results were discussed and compared with Bessho's results. The conclusions deduced from this study are as follow, (1) The acceleration of motion calculated by the O.S.M. is similar with Bessho's data for the Fn 0.5 (2) The amplitudes of the behaviours of motions take peak at 1.0<λ/L<1.4.