안트라센의 골격을 갖는 청색 발광 물질, 9-(2-naphthyl)-10-(p-tolyl)anthracene (2-NTA)를 기본으로 하고, 오렌지 도판트인 루브렌을 다양한 부피비로 사용하여 백색 유기발광소자를 제작하였다. 그 결과 C.I.E. 좌표가 (0.32, 0.39)인 백색 유기발광소자를 얻었다. 다양한 부피비의 소자 중 루브렌을 1.5% 이하로 증착된 소자가 3% 이상으로 증착된 소자 보다 전기발광 효율이 높았다. 더욱이 2-NTA를 포함하 는 백색 유기발광소자는 같은 조전하에서 2-NTA 만의 청색 유기발광소자 보다 낮은 턴온 전압을 갖는다. 결론적으로 2-NTA는 적은 양의 오렌지 도판트만으로 순수한 백색 유기발광소자를 구현할 수 있다.
Uniform scions and rootstocks should be produced to ensure grafting success. Light quality is an important environmental factor that regulates seedling growth. The effects of warm- and cool-white light emitting diode (LED) ratios on seedling growth were investigated. Scions and rootstocks of cucumber, tomato, and watermelon were grown in a closed transplant production system using LED as the sole lighting source. The LED treatments were W1C0 (only warm-white), W1C1 (warm-white: cool-white = 1:1), W3C1 (warm-white: cool-white = 3:1), and W5C2 (warm-white: cool-white = 5:2). The seedlings grown in W1C1 had the shortest hypocotyls, and the seedlings grown in W1C0 had the longest hypocotyls among the three tested vegetables. The hypocotyls of watermelon scions, watermelon rootstocks, and tomato rootstocks were shortest in W1C1, followed by those in W3C1, W5C2, and W1C0, but there was no significant difference between W3C1 and W5C2, which remained the same as the ratio of cool-white LEDs increased. In addition, tomato scions had the first and second longest hypocotyls in W1C0 and W3C1, respectively, and the shortest hypocotyls in W5C2 and W1C1, along with W5C2 and W1C1, although the difference was not significant. The stem diameter was highest in W1C0 except for tomato seedlings and rootstocks of watermelon. The shoot fresh weight of scions and rootstocks of cucumber and watermelon and the root fresh weight of cucumber scions were lowest in W1C1. These results indicated that different ratios of LED lighting sources had a strong effect on the hypocotyl elongation of seedlings.
New type of White-Light Emitting Diode (WOLED) that emits three primary colors of red, green and blue has been demonstrated. WOLED is properly laid out with emitting layers so that all three wavelengths of light can be emitted by using fit energy level, and the organic functional layer named white balanced layer (WBL) is introduced. As for the material used as WBL, the experiment used NPB that has electron blocking effect with its large LUMO value. The color purity of such WOLED can be easily adjusted through the adjustment of the number of electron carriers injected into light emitting layer. In this of study, color coordinate was (0.341, 0.424) and light emitting efficiency was 16.5 cd/A at current density 10 mA/cm2, so the WOLED demonstrated highly efficient characteristics of over commercial level.
Two different emitting compounds, 1-[1,1;3,1]Terphenyl-5-yl-6-(10-[1,1;3,1]terphenyl-5-ylanthracen-9-yl)-pyrene (TP-AP-TP) and Poly-phenylene vinylene derivative (PDY 132) were used to white OLED device. By incorporating adjacent blue and yellow emitting layers in a multi-layered structure, highly efficient white emission has been attained. The device was fabricated with a hybrid configuration structure: ITO/PEDOT (40 nm)/PDY-132 (8∼50 nm)/NPB (10 nm)/TP-AP-TP (30 nm)/Alq3 (20 nm)/LiF (1 nm)/Al (200 nm). After fixing TP-AP-TP thickness of 30 nm by evaporation, PDY-132 thickness varied with 8, 15, 35, and 50 nm by spin coating in device. The luminance efficiency of the white devices at 10 mA/cm2 were 2.93 cd/A∼6.55 cd/A. One of white devices showed 6.55 cd/A and white color of (0.290, 0.331).
본 연구에서 7,7'-(2,2'dimethoxy-1,1'-binaphthyl-3,3'-diyl) bis(4-(thiophen-2-yl) benzo[e] [1,2,5] thiadiazole (TBT) 라는 binaphthyl기를 기반으로 가지는 녹색 도판트 물질을 합성하였다. 추가적으로 인광 발광 물질인 iridium(III)bis[(4,6-di-fluoropheny)-pyridinato -N,C2]picolinate (FIrpic)을 홀 수송용 호스트 물질인 N,N'-dicarbazolyl-3,5-benzene (mCP)에 도핑하고, TBT와 bis(2-phenylquinolinato)-acetylacetonate iridium(III) (Ir(pq)2acac)를 전자 수송용 호스트 물질인 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi)에 도핑하여 백색 빛을 발광하는 white organic light emitting diode (OLED)를 제작하였다. TBT를 사용하여 제작한 white OLED의 최대발광 효율과 외부 양자 효율은 각각 5.94 cd/A 과 3.23%를 나타냄을 알 수 있었다. Commission Internationale de I'Eclairage (CIE) 색 좌표의 값은 1000 nit에서 (0.34, 0.36)을 띄면서 순백색을 구현함을 확인하였다.
Bi co-doped ZnS:Mn,Bi yellow phosphors for white light emitting diodes were prepared by the conventional solidstate reaction method. The optical and structural properties of ZnS:Mn,Bi phosphors were investigated by x-ray diffraction, scanning electro microscopy and photoluminescence. ZnS:Mn,Bi phosphors showed XRD patterns of hexagonal structure. The photoluminescence of ZnS:Mn,Bi phosphors showed spectra extending from 480 to 700 nm, peaking at 580 nm. The photoluminescence of 580 nm in the ZnS:Mn,Bi phosphors was associated with the 4T1 → 6A1 transition of the Mn2+ ions. The highest photoluminescent intensity of the phosphors under 405 nm and 450 nm excitation was obtained at Bi concentration of 7mol%. The optimum mixing conditions with epoxy and yellow phosphor for white light emitting diodes were observed in a ratio of epoxy:yellow phosphor of 1:3.5. The CIE chromaticity of the white LED at the 1:3.5 ratio was X = 0.3454 and Y = 0.2449.
The authors have demonstrated white oraganic light-emitting diodes (WOLED) using 1,4-bis[2-(4'-diphenylaminobiphenyl-4-yl)vinyl]benzene as fluorescent blue emitter and iridium(III) bis(5-acetyl-2-phenylpyridinato-N,C2') acetylacetonate as phosphorescent red emitter. The optimized WOLED using red host material as bis(2-methyl-8-quinolinato) -4-phenylphenolate exhibited proper color stability in comparison with the control device using 4,4'-N,N'-dicarbazole-biphenyl as red host. The white device showed a maximum luminance of 21100 cd/m2 at 14 V, luminous efficiency of 9.7 cd/A at 20 mA/cm2, and Commission Internationale de I'Eclairage (CIEx,y)coordinates of (0.32, 0.34) at 1000 cd/m2. The devices also exhibited the color shift with δCIEx,y coordinates of ± (0.01,0.01) from 100 to 20000 cd/m2.
본 논문에서는 청색 인광 발광 물질인 bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium (III) (Flrpic)과 녹색 인광 발광 물질인 fac-tris(2-phenypyridine) irdium(III) (Ir(ppy)3)와 적색 인광 발광 물질인 his(5-benzoyl-2-phenylpyridinato-C,N)iridium(III) (acetylacetonate) ((Bzppy)2Ir(acac))를 각각 적층하여 백색 유기 발광 다이오드를 제작하였고, 각각의 발광층 사이에 혼합된 스페이서인 4,4'-N,N'-dicarbazole-biphenyl (CBP):4,7-diphenyl-1,10-phenanthroline (BPhen)을 적층하여 그 때의 영향에 대하여 연구하였다. 최적화된 구조에서의 전력 효율은 0.014 mA/cm2에서의 19.7 lm/w를 나타내었으며, 0.127 mA/cm2에서의 11.5%의 외부 양자 효율을 나타내었고, 8 V에서 Commission Internationale do I'Eclairage (CIEx,y) coordinates (x=0.36, y=0.44)의 색좌표를 나타내었다.
Recent years have brought remarkable developments in white light emitting devices (WLEDs) and white organic light-emitting devices (WOLEDs). However, their efficiency, CIE values, CRI and lifetime are still not ideal. This review covers detailed discussion about syntheses of organometallic complexes, inorganic phosphors and quantum dots used in WLEDs, WOLEDs and their electroluminescent properties until December 2007.
Development of white light emitting materials has been an interesting area for scientists and scientists have developed many organic, polymer and inorganic materials for white electroluminescent devices. Among them, single component small molecules gave best results in terms of efficiency, simplicity of device fabrication, and CIE values. Therefore, this review covers detailed discussion about syntheses of small compounds used in white organic light emitting devices until 2007.
White emission is important for applying organic EL devices to full-color flat panel display and backlight for liquid crystal display. In order to obtain white emission, the use of a light-emitting material which shows the white emission by itself is advantageous for these applications because of its high reliability and productivity. A chelate-metal complex such as zinc bis(2-(2-hydroxyphenyl) benzothiazolate) (Zn(BTZ)2 was known to emit white light with a broad electroluminescence. In this study, the electroluminescent characteristics of Be(BTZ)2 and Mg(BTZ)2, as well as Zn(BTS)2 were investigated using organic electroluminescent devices with the structure of ITO/TPD/ Be(BTZ)2, Mg(BTZ)2, or Zn(BTZ)2/Al. It was found that the device containing Be(BTZ)2 showed the highest power efficiency.
Background : Nasturtium officinale L. which is commonly known as watercress is aquatic perennial herb distributed to Europe, Asia, North and South America. It consist of various nutrients and beneficial compounds such as vitamin B and C, provitamin A, folic acid, carotenoids, glucosinolates, and minerals. Recent studies have demonstrated the biological properties that include antidiabets, antiinflammatory, antioxidative, and anticancer. In this study, the effects of light-emitting diodes (LEDs) on growth and development, accumulation of phenolic compounds and glucosinolates were investigated in watercress. Methods and Results : Length of shoot and root, and fresh weight of whole plants were measured every weeks (1 to 3 weeks) after sowing. These were significantly affected by different LED lights. Normally, length of shoot and fresh weight of white- and blue-light-radiated watercress were less than those of red-light-radiated watercress. Contents of phenolic compounds and glucosinolates were investigated in watercress under different LEDs treatment by HPLC analysis. Six phenolic compounds including catechin hydrate, chlorogenic acid, caffeic acid, p-coumaric acid, trans-cinnamic acid, and kaempferol were detected. Also, eight glucosinolates that include four aliphatic glucosinolates (glucoiberin, gluconapoleiferin, glucosiberin, and glucohirsutin), three indolic glucosinolates (4-hydroxyglucobrassicin, glucobrassicin, and 4-methoxyglucobrassicin), and one aromatic glusinolate (gluconasturtiin). Mostly, white light treatment led to the higher production of their compounds than those of red- and blue-radiated. Conclusion : It is concluded that different LED lights have effect on growth rates and secondary metabolites production. Red light caused vigorous growth of shoot and affected their fresh weights. In addition, the accumulation of each compounds was varied depending on light colours and time of harvest.