검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 10

        2.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In the shallow coastal area, located off the northwestern Taean Peninsula of the eastern Yellow Sea, geoacoustic models with two layers were reconstructed for underwater acoustic experimentation and modeling. The Yellow Sea experienced glacio-eustasy sea-level fluctuations during Quaternary period. Coastal sedimentation in the Yellow Sea was characterized by alternating terrestrial and shallow marine deposits that reflected the fluctuating sea levels. The coastal geoacoustic models were based on data from piston, grab cores and the high-resolution 3.5 kHz, chirp seismic profiles (about 70 line-kilometers, respectively). Geoacoustic data of the cores were extrapolated down to 3 m in depth for geoacoustic models. The geoacoustic property of seafloor sediments is considered a key parameter for modeling underwater acoustic environments. For simulating actual underwater environments, the P-wave speed of the models was adjusted to in-situ depth below the sea floor using the Hamilton method. The proposed geoacoustic models could be used for submarine acoustic inversion and modeling in shallow-water environments of the study area.
        4,000원
        3.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지음향 모델링은 퇴적층과 기반암의 해저 지층을 통해 전파되는 음파 특성을 예측하기 위해 사용된다. 이 연구는 동해 한국대륙주변부의 정동진 해역에서 50 m 퇴적층 심도의 4개 지음향 모델을 구성하였다. 지층 모델은 고해상 에어건 탄성파 자료, SBP 자료, 퇴적물 코어에 근거한다. P파 속도는 신호투과법에 의해 측정되었고, 압전기 트랜스듀서의 공진 중심 주파수는 1 MHz를 유지하였다. 42개 P파 속도와 41개 음감쇠 측정이 세 개 코어 퇴적물에서 수행되었다. 실제 모델링을 위해, 모델의 P파 속도는 Hamilton 방법을 이용하여 해저면 아래 현장 심도 속도로 보정하였다. 연안 지층의 이 지음향 모델은 동해 정동진 해역에서 지음향 특성의 수직/수평 변화를 반영하는 지음향/수중음향 실험을 위해 활용될 것이다.
        4,200원
        4.
        2015.05 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to identify the flow resistance of the bottom pair trawl nets. The bottom pair trawl nets being used in fishing vessel (100G/T, 550ps) was selected as a full-scale net, and 1/10, 1/25 and 1/50 of the model nets were made. Converted into the full-scale net by Tauti’s modeling rule and Kim’s modeling rule, when resistance coefficient k of each net was calculated by substituting into above equation for flow resistance R and wall area of nets S values of each net v. Because resistant coefficient k decreases exponentially according as flow velocity v increases to make k cv-m, c and m values of each net were compared. As a result, as the model was smaller, c and m values was smaller in the two rule into standard of 1/10 model value, decrease degree of 1/25 model was almost same in the two rule, decrease degree of 1/50 model was very big in Tauti’s modeling rule. Therefore, in the result of experiment, because average of c and m values for similarly 1/10 and 1/25 model were given c=4.9 (kgf․s2/m4) and m=0.45, R (kgf) of bottom pair trawl net could show R =4.9Sv1.55 using these values. As in the order of cod-end, wing and bag part for 1/25 and 1/50 model net were removed in turn, measured flow resistance of each, converted into the full-scale, total resistance of the net and the resistance of each part net were calculated. The resistance ratio of each part for total net was not same in 1/25 and 1/50 model each other, but average of two nets was perfectly same area ratio of each part as the wing, bag and cod-end part was 43%, 45% and 12%. However, the resistance of each part divided area of the part, calculated the resistance of per unit area, wing and bag part were not big difference each other, while the resistance of cod-end part was very large.
        4,000원
        5.
        2011.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is R=kSr2 against the flow velocity of each net r, resistance coefficient k was calculated by substituting R, r and S of the net. From the result, it was found that k decreases exponentially when u increases which makes k=cr-m. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as r increases to make h=dr-n. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.
        4,000원
        6.
        2006.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A model experiment using circulation water channel was carried out to investigate the dynamic characteristics of bottom trawl net which can be used in sea mount of North Pacific. Hydrodynamic resistance and shape variation according to the flow velocity and angle of hand rope transformation for net were measured, and experimental value was analyzed as the value of full-scale bottom trawl net. The results summarized are as follows; At the 30˚ of angle of hand rope to net, hydrodynamic resistance varied from 0.5kgf to 2.68kgf as the flow velocity increased between 0.31m/s and 0.92m/s, and formula of hydrodynamic resistance for the model net was Fm=3.04 · r1.53. At the fixed angle of hand rope, Net height was low and Net width was high according to the increase of flow velocity, and in addition, vertical opening was low and Net width was high by the increase of angle of hand rope at the fixed flow velocity. At the 30˚ of angle of hand rope to net, net opening area was 0.214m2 as flow velocity was 0.61m/s, and formula of net opening area for the model net was Sm=-0.22r+0.35. At the 30˚ of angle of hand rope to net, catch efficiency seemed to be highest as 0.319m3/s of filtering volume at the 0.76m/s(51kt's) of flow velocity. Shape variation of net showed the gradual laminar transform for the variation of flow velocity but there needed some improvements due to the occurrence of shortening at the ahead of wing net.
        4,600원
        7.
        1996.12 KCI 등재 SCOPUS 구독 인증기관·개인회원 무료
        A bottom-up model for the formation of GMCs is described, where the observed GMCs are the aggregates of less massive clouds. The aggregates are getting more and more massive in the process of consecutive collision between clouds.
        8.
        2021.04 KCI 등재 서비스 종료(열람 제한)
        이 연구는 상향식 교육과정 평가 모형을 개발하고 이를 적용하기 위한 협력적 실행 연구이다. 중앙 집중적인 교육과정 개발 체제를 따르는 우리나라의 상황을 고려해 볼 때, 교사는 교육과정 실행의 주체임에도 불구하고 국가 교육과정을 평가하고 이에 대한 개선 의견을 제안할 수 있는 공식적인 기회를 갖기 어려운 형편이었다. 이와 같은 문제의식에서 출발하여, 이 연구는 단위 학교 에서 현행 국가 교육과정을 평가하고자 할 때 적용할 수 있는 모형을 개발하고 이를 적용하였다. 연구자-참여자 간 협력을 통해 개발된 교육과정 평가 모형을 적용한 결과, 단위 학교에서 이루어지는 국가 교육과정 평가는 교사들이 국가 교육과정에 대한 이해와 참여의 필요성을 인식하는 계기를 제공하였고, 현장에 기반을 둔 유의미한 개선 의견을 도출하는 기회가 되었으며, 교육과정 제안자로서 국가 교육과정에 대한 ‘주인-되기’의 역동을 형성하는 과정임을 확인할 수 있었다. 연구 결과를 바탕으로, 이 글은 상향식 교육과정 평가 모형이 지속・확산되기 위한 향후 개선 과제를 제안하였다.
        9.
        2017.11 KCI 등재 서비스 종료(열람 제한)
        This study analyzes the impacts of agricultural water shortages in Korea using a combined top-down and bottom-up model. A multi-region multi-output agricultural sector model with detailed descriptions of production technologies and water and land resource constraints has been combined with a standard CGE model. The impacts of four different water shortage scenarios were simulated. It is shown that an active adaptation of crop choices occurs in even the regions with relatively abundant water resources in order to respond to the change in relative output prices caused by water shortages. We found that although the losses in production values are not quite large despite water shortages due to the price feedbacks, the loss in GDP is substantial. We show that our combined approach has advantages in deriving region and product specific production effects as well as the overall GDP loss effect of water shortages.
        10.
        2013.02 KCI 등재 서비스 종료(열람 제한)
        고르지 않은 바닥을 지나는 천수 흐름을 해석하기 위해 천수방정식의 흐름률 경사항과 바닥 경사 생성항에 대해 HLLL 기법과 DFB (Divergence Form for Bed slope source term) 기법을 각각 적용하여 유한체적 모형을 구성하였다. 또한, PSC (Partially Submerged Cell)의 고려를 위해 VFR (Volume/Free-surface Relationship)도 이용하였다. MUSCL에서 WSDGM(Weighted Surface-Depth Gradient Method)을 보다 단순하게 고쳐도 원래의 방법과 정확도가 동등함을 1차원 정상 흐름에 대해 확인하였다. 1차원 PSC에 대한 VFR를 통해 흐름률 경사항과 바닥 경사 생성항의 선평형성이 정확하게 충족됨을 입증하였다. 2차원 PSC에서 DFB 기법으로는 지배방정식의 선평형성이 충족되지 않은 문제를 삼각형 격자에 대한 VFR를 이용하여 해소하였다. 삼각형 턱과 둥근 융기를 지나는 2차원 댐 붕괴 흐름에 대한 모의에서 실험실 실험 결과와 잘 부합됨을 확인하였다. 또한, 부분 댐 붕괴 흐름에 대한 모형의 적용에서 경사면은 물론 불규칙 바닥에서도 요철의 잠김이 성공적으로 모의되었다. 따라서 고르지 않은 실제 하천 지형에 대한 이 모형의 적용성이 기대된다.