검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 20

        1.
        2023.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Under increased complexity and uncertainty of overseas construction projects, it is important for construction companies to improve their own project risk management capabilities instead of risk-taking strategies to secure competitiveness in the overseas construction market. Although most of the risks occur in project execution stage, many previous studies focused on planning stage including risk identification and analysis among PRM process. Therefore, this study aims to verify the effectiveness of whole PRM process during project execution stage through empirical study on participants of overseas construction projects. As the result it was found that first, the factor directly affects the project success is the execution process of PRM. It implies that appropriate actions such as appointing charged manager for risks, timely implementation of responding plan, continuous risk monitoring and updating established plan are the key for contribution to the project success. Second, the importance of communication in PRM is also found, which is not conducted at a specific but throughout the entire PRM process and need to be managed as essential factor for successful PRM..
        4,000원
        2.
        2023.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        배추는 국내 생산 엽채류 중 재배면적 및 생산량이 가장 높은 비중을 차지하는 중요한 작물이다. 농촌인구 감소 및 고령화는 농촌 노동력 부족으로 이어지고 이는 배추 생산력 감소의 원인이 되고 있다. 배추 수확은 대부분 인력에 의존하고 있으며, 노동력 절감과 생산성 향상을 위한 관리 및 수확을 위한 배추 수확기가 개발되고 있다. 본 논문의 목적은 견인형 자주식 배추 수확기 견인 고리 설계단계에서 구조해석을 실시하여 최대 응력, 변형량, 안전계수를 도출하여 안정성을 높이는 데 있다. 수집부에 배추가 최대 적재 시 발생하는 하중을 기준으로 하중의 각도, 견인 고리의 높이를 변경하여 구조해석을 실시하였다. 수집부 부착 견인 고리의 경우 최소 높이에서 최대 응력 608.38 MPa, 최대 변형량 3.14e-3 mm, 최소 안전계수 0.78이 도출되었으며, 배추 수확기 부착 견인 고리의 경우 최소 높이에서 최대 응력 835.76 MPa, 최대 변형량 4.74e-3 mm, 최소 안전계수 0.48이 도출되었다. 마지막으로 힌지핀의 경우 중간 높이에서 최대 응력 373.46 MPa, 최대 변형량 2.12e-3 mm, 최소 안전계수 1.23이 도출되었다. 최대 응력 지점을 제외한 대부분은 안전계수가 1보다 높았다. 따라서 제작 단계에서는, 최대 응력 지점을 보강하여 견인 고리에 대한 구조적 안정성을 높일 필요성이 있다.
        4,200원
        3.
        2022.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Most of the prior studies on the servitization of manufacturing companies have been actively studied, focusing on the performance and cases of servitization at the single company level. According to the results, most of the servitization at the single company level has been expanded based on the relevance of the company’s core products. However, the form of companies that form a large axis of the Korean economy is a large-scale business group, and these business groups incorporate service affiliates for various purposes, so they show different characteristics from that of a single corporate. In addition, since the purpose of forming a business group is different for each business group, the service relevance between affiliates within the business group is different. Therefore, this study aims to examine the effect of service relevance between affiliates within a business group on the management performance of each business group. To this end, an empirical analysis will be conducted using panel data for 10 years from 2011 to 2020 for a total of 98 affiliates listed on KOSPI and KOSDAQ of 9 domestic business groups. Based on these results, the direction for improving management performance and establishing future servitization strategies for large business groups in Korea will be expected to be made.
        4,000원
        4.
        2021.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently, the number and scale of projects being carried out within the enterprise are increasing. Accordingly, many companies are competitively introducing a Project Management Office (PMO) to efficiently manage these projects, allocate resources, and effectively link the projects and corporate strategies. However, the project manager who directly manages the project wants to receive support from the PMO in many areas for successful project management, but the project manager does not like to be interfered with by the PMO. On the other hand, the PMO may not be able to satisfy all the requirements of each PM as PMO oversees the entire project with limited resources. In addition, since the PMO must monitor and control the project and support the project according to the priorities of each project, conflicts with each PM can be formed. Therefore, in this study, based on the case of a company, the difference between the perceptions of PMs and PMOs about the importance of the required roles of PMOs is to be examined. As a result of the study, it was confirmed that the core functions and sub-functions of PMO, which PMO members and PMs consider important, are different. It was identified that the PMs valued the PMO function that would be helpful for their successful project execution. On the other hand, PMO members revealed that they had a relatively high priority for the roles to monitor and control project performance for which they were directly responsible.
        4,000원
        5.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 고추수확기의 이물질 선별부의 선별성능을 분석하기 위해 수행하였다. 고추 품종 3가지에 대하여 건조하지 않은 시료와 건조한 시료의 고추 과실 및 이물질의 부유 속도를 측정하였다. 각 시료의 부유 속도를 측정한 결과, 건조하지 않은 고추 과실, 고추 줄기, 고춧잎은 각각 11.5-14.3 m/s, 10.9-12.5 m/s, 3.45-5.42 m/s 로 나타났다. 건조한 고추 과실, 고추 줄기, 고춧잎의 부유속도는 각각 10.89-12.1 m/s, 8.35-9.54 m/s, 2.74-5.14 m/s로 나타났다. 이물질 선별부 요인 실험 장치를 제작하고, 풍향 가이드 3개, 5개를 추가한 풍구를 제작하여 풍향 가이드 추가에 따른 풍속을 측정하였으 며 그 결과, 풍향 가이드 추가한 풍구의 좌우 풍속의 편차가 풍향 가이드를 추가하지 않은 풍구의 풍속 편차보다 낮았다. 풍구 가이드의 갯수와 수집 가이드의 위치에 따라 이물질 선별률, 이물질 정체율을 조사하고, 그 결과를 반복이 있는 이원배치법을 사용하여 통계분석을 실시하였다. 수집 가이드 위치를 전방 중앙 기준으로 풍향 가이드를 추가하지 않은 풍구 이물질 선별률과 이물질 정체율은 각각 47.0%, 7.2%로 나타났다. 풍향 가이드를 3개 추가한 경우 이물질 선별율과 정체율은 각각 34.2%, 2.6% 였으며, 풍향 가이드 5개를 추가한 경우 각각 31.1%, 0.8%로 나타났다. 이물질 선별 및 정체를 고려하였을 때 풍향 가이드 3개를 추가하고 수집 가이드 위치를 전방 중앙 조건에서 최적인 조건으로 판단된다.
        4,000원
        6.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The present study identified several antecedents that create perceived resistance to supply chain management (SCM) change. This work particularly emphasizes SCM change, which is notable given its central role in reacting market orientation and varied environmental and managerial conditions. A careful case study on a small and medium sized food production company in South Korea leads to the formulation of our framework including one second-order construct of ‘resistance’ as well as eight first-order constructs of ‘implementing the payment terms’, ‘balancing of business process’, ‘fear of responsibility’, ‘business sustainability transparency’, ‘past experience of failure’, ‘competence of work personnel’, ‘cooperation with third parties’ and ‘sharing personnel information with partner’. The hypothesized relation of first- and second-order construct was validated using survey sample data collected from 350 respondents who completed their questionnaire instrument. Results from confirmatory factor analysis revealed that nomological validity was established at statistical significance level by identifying six first order constructs of ‘implementing the payment terms’, ‘fear of responsibility’, ‘business sustainability transparency’, ‘past experience of failure’, a conbined construct of 'competence of work personnel/ cooperation with third parties’ and ‘sharing personnel information with partner’. The findings from our work are expected to provide important insights to the strategy for SCM risk management for small and medium sized company.
        4,200원
        7.
        2019.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Recently the business environment surrounding the financial investment industry is changing rapidly, and the demands of customers (diversity and the cycle of change etc.) are getting shorter. In this context, it can be said that companies are forced to adopt an agile management environment. In particular, non-face-to-face channels, including MTS, is adopting the agile system into the digital finance sector from a company-wide and strategic perspective. This study analyzed the effects of MTS services’ environment quality on customer satisfaction and continuous intention to use for MTS users who are rapidly increasing under the agile management environment in the financial investment industry. This study surveyed the quality of service environment (accessibility, convenience, design, security), customer satisfaction, and continuous intention to use for 350 MTS users. First, accessibility, convenience, and security of MTS service environment quality had a positive effect on customer satisfaction, and design was rejected Second, customer satisfaction has a positive effect on continuous intention to use. Third, convenience and security of MTS service environment quality have positive effects on continuous intention to use, and accessibility and design were rejected. The results of this study, together with demographic analysis, are expected to provide useful implications for MTS activation studies and securities firms’ strategies.
        4,200원
        8.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        베일의 시장 판매를 위해서는 표준화된 품질과 상품의 정량화가 선행되어야 하며, 이를 뒷받침하기 위해 베일의 정량화가 가능한 베일러 개발이 필요하다. 베일의 크기보다 중량을 기준으로 정량화할 경우 수확물의 생산 조건과 관계없이 베일의 일정한 규격화가 가능해진다. 이러한, 중량기준 정량화가 가능한 베일러의 개발을 위해 가장 중요한 요소기술들 중 하나가 바로 가변 중량 측정 시스템이다.따라서 본 연구에서는 중량 가변이 가능한 베일러의 기초 연구로써 트레일러의 3점에 로드셀을 설치하여 트레 일러에 적재되는 내용물의 하중이 3점의 로드셀에 의해 모두 지탱되도록 플로팅 타입의 하중 측정 시스템을 구성하였다. 이를 이용하여 정적 하중과 동적 하중을 측정함으로써 하중 측정 시 발생하는 문제점 들을 파악하고, 중량 감응형 베일러 개발의 기초자료로 활용하기 위하여 연구는 수행되었다.그 결과 정적 측정 신호와 동적 측정 신호의 지배적인 주파수 성분은 각각 0∼0.5Hz와 0∼0.1Hz에서 발생하였으며, 사용된 전원으로 인한 60Hz의 주파수 성분과 시스템의 이동 시 지표면의 굴곡, 엔진의 구동 등으로 인하여 진동이 발생하였다. 그래서 이러한 노이즈를 제거하기 위하여 저주파 통과 필터(3 Order, Butterworth type, Cutoff frequency 0.1Hz)를 사용하였다. 편심 하중에 따른 측정 신호의 분석 결과 편심 하중은 하중 측정에 영향을 주지 않으며, 시스템의 이동속도 3.47km/h와 6.21km/h에서 측정된 하중과 예측 하중을 비교한 결과 각각 -2.42kgf와 -1.71kgf의 평균 하중 오차를 보였다. 즉, 시스템의 이동속도는 하중 측정에 영향을 미치지 않았으며, 추후 중량 감응형 가변 베일러에 본 시스템을 적용하 기 위해서는 실제 베일러의 기계적 진동과 비 진동 요인들을 규명해야 한다.
        4,000원
        9.
        2018.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to analyze the efficiencies of project management offices in large information system construction projects using the data envelopment analysis. In addition, we tried to estimate the confidence interval of those efficiencies using bootstrap DEA to give a statistical meaning. The efficiency by the CCR model is analyzed as eight project management offices are fully efficient and 22 project management offices are inefficient. On the other hand, there are 15 project management offices are fully efficient, but 15 project management offices are inefficient in the BCC model. As the result of the scale efficiencies, of the inefficient project management offices, 13 project management offices are inefficient in scale. It is possible to eliminate the inefficiency in the CCR model by improving their project performances. And, the nine project management offices showed that the inefficiency was due to pure technical efficiency, and these companies should look for various improvements such as improvement of project execution system and project management process. In order that the inefficient project management offices be efficient, it is analyzed that more efforts must be made for on-budget and on-time as a result of examining the potential improvement potentials of inefficient project management offices.
        4,200원
        10.
        2018.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to improve effectiveness of Korea’s Official Development Assistance (ODA) provided to developing countries. To do this, we analyze the efficiency of ODA provided to 38 recipient countries by Korea through data envelope analysis method. The effects of four factors including population, GDP, economic decline and poverty, and external intervention on efficiency are also investigated by utilizing tobit regression analysis. As a result of the DEA efficiency analysis, it is found that the average efficiency score of the total is about 59%. By region, the average efficiency score of Asia, Africa, Central and South America, and the East and CIS (Commonwealth of Independent States) are about 42%, 68%, 70%, and 74%, respectively. It indicates that the Asian countries are inefficient compared to countries of the other regions. It is also found that factors of population, GDP, economic decline and poverty, and external intervention have statistically significant effects on efficiency at 0.01 significance level. In the case of the population, the higher the population of the recipient country, the more negative (-) effect is on the efficiency. The other factors such as GDP, economic decline and poverty, and external intervention have positive effects on the efficiency.
        4,000원
        11.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        동해 남서해역 퇴적물의 현장 음파전달속도를 파악하기 위하여 신호투과법을 이용하여 퇴적물의 실험실 음파전 달속도를 측정하였다. 측정된 실험실 음파전달속도는 해저면 온도, 해수 음파전달속도, Kim et al. (2004)과 Hamilton (1980) 모델을 적용하여 현장 음파전달속도로 보정하였다. Kim et al. (2004)과 Hamilton (1980)의 현장 음파전달속도는 연구지역 퇴적물 특성을 반영하며, 유사한 분포를 보인다. 현장 음파전달속도 보정에는 해저면 온도의 영향을 크게 받 는 것을 확인할 수 있다. 따라서 퇴적물의 실험실 음파전달속도를 통해 현장 음파전달속도를 파악하기 위해서는 해저 표층 온도 자료를 통한 온도 보정이 반드시 수행되어야 한다.
        4,300원
        12.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 국내에서는 안전하고 고품질인 농산물에 대한 소비자의 선호도가 높아지고 있다. 고품질 농산물 생산과 환경오염을 줄이기 위해서는 화학비료와 같은 농자재의 과잉투입 문제를 해결하여야 하며 이를 위하여 변량시비에 관한 연구가 수행되고 있다. 변량시비용으로 널리 사용되는 원판식 입제 살포기의 경우 시비량이 변화함에 따라 살포패턴이 변화하는 문제점이 있다. 본 연구에서는 시비량 변화에 따른 살포패턴 변화 요인을 찾기 위하여 이산 요소 모델링과 고속카메라 촬영을 통하여 살포기 원판 위에서 의 입자거동을 분석하였다. 그 결과, 시비량이 증가함에 따라 원판회전 반대방향으로 비산되는 입자량 이 증가하게 되고 출구방향 조절장치의 출구 시작지점에서 빠져나가지 않고 출구 끝 부분에서 빠져나가 는 입자가 증가하여 원판 위에서 회전방향으로 더 많이 이동되어 살포되므로 살포패턴에 변화를 가져오 는 것으로 파악되었다. 이러한 문제를 해결하기 위하여 회전원판 위에 내부날개를 설치하여 회전 축 주 변에 낙하하는 입자를 원심력에 의해 출구방향 조절장치의 벽 쪽으로 강제 이동하도록 장치를 개선하여 원판 위 입자거동을 분석하였다. 그 결과, 시비량의 변화와 상관없이 회전축 주변의 입자가 출구방향 조절장치의 벽 쪽으로 이동하여 원판 위에서 회전하다가 조절장치의 출구 시작 부분에서 빠져나가 살포 되는 것으로 나타나 시비량의 변화에 따른 살포패턴의 변이가 줄어들 것으로 판단되었다. 차후, 균일한 살포패턴을 만들기 위해서 내부날개를 설치한 원판식 입제 살포기를 이용하여 다양한 시비조건에 따른 살포패턴 데이터를 수집 및 분석 하고자 한다.
        4,500원
        13.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        지음향 모델링은 퇴적층과 기반암의 해저 지층을 통해 전파되는 음파 특성을 예측하기 위해 사용된다. 이 연구는 동해 한국대륙주변부의 정동진 해역에서 50 m 퇴적층 심도의 4개 지음향 모델을 구성하였다. 지층 모델은 고해상 에어건 탄성파 자료, SBP 자료, 퇴적물 코어에 근거한다. P파 속도는 신호투과법에 의해 측정되었고, 압전기 트랜스듀서의 공진 중심 주파수는 1 MHz를 유지하였다. 42개 P파 속도와 41개 음감쇠 측정이 세 개 코어 퇴적물에서 수행되었다. 실제 모델링을 위해, 모델의 P파 속도는 Hamilton 방법을 이용하여 해저면 아래 현장 심도 속도로 보정하였다. 연안 지층의 이 지음향 모델은 동해 정동진 해역에서 지음향 특성의 수직/수평 변화를 반영하는 지음향/수중음향 실험을 위해 활용될 것이다.
        4,200원
        14.
        2013.12 구독 인증기관 무료, 개인회원 유료
        디지털 카메라에서는 일반적으로 높은 공간주파수에 의해 발생하는 주파수 간섭을 제거하기 위해 OLPF(optical lowpass filter)를 사용한다. 그러나, 제조사는 제조단가의 절약을 위해 OLPF를 제거하고 영상을 획득하기를 원하고 이에 따라 OLPF를 제거한후에 영상을 획득한 후 높은 공간주파수를 가지는 영역에 의한 색 번짐 현상을 제거하기 위한 방법의 개발이 필요하다. 따라서, 본 논문에서는 카메라의 OLPF 제거 후 영상의 상세 성분을 보존하고 색 번짐 현상를 제거하는 방법을 제안한다. 먼저 영상의 RGB 각 채널별 색 변화 비율을 사용하여 색 번짐 영역을 검출하고, 주변의 채널별 평균 색도 비율을 이용하여 색 번짐 현상을 제거한다. 실험 결과 제안한 방법은 세부 성분의 손실을 줄이고 색 번짐 현상의 제거에서 우수한 성능을 보였다.
        4,000원
        15.
        2012.12 구독 인증기관 무료, 개인회원 유료
        피부색 정보는 컬러 영상에 포함된 얼굴 영역 또는 피부색 영역을 검출하는데 있어 중요한 요소이다. 일반적으로 피부색 정보로부터 통계 피부색 모델을 이용하여 피부색 영역을 검출한다. 하지만 영상에 피부색에 해당하는 색이 포함되어 있는 컬러 영상에서는 일반적인 통계 피부색 모델만으로 정확한 피부색영역을 검출할 수 없다. 따라서 본 논문에서는 다른 피부색 부분이 포함되어 있는 다양한 컬러 영상에서피부색 영역만을 정확히 검출하기 위한 방법을 제안한다. 먼저 RGB, YCbCr, HSI 피부컬러 모델을 기반으로 각 모델을 이용한 피부색 검출율을 가중치로 사용하여 얼굴 후보 영역을 설정하였다. 또한 영상내의 피부색 영역이외의 부분을 제거하기 위하여 영상에서의 관심영역을 계산하여 얼굴 후보 영역과 관심영역을 동시에 만족하는 피부색을 찾음으로써 피부색을 배경으로 가지는 컬러영상에서 정확한 피부색검출을 수행하였다. 실험 결과 제안한 방법이 유사한 피부색을 포함한 영상에서 우수한 피부색 검출 성능을 보였다.
        4,000원
        17.
        2006.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
          This study considers the problem of scheduling jobs on uniform parallel machines with a common due date. The objective is to minimize the total absolute deviation of job completion times about the common due date. This problem is motivated by the fact t
        4,000원
        18.
        2004.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This research considers the problem of scheduling Jobs on unrelated parallel machines with a common due date The objective is to minimize the total absolute deviation of Job completion times about the common due date. This problem is motivated by the fact
        4,000원
        19.
        2011.12 KCI 등재 서비스 종료(열람 제한)
        Recently, the use of antibiotics to improve animal productivity in livestock industry was strictly restricted. For these reason, probiotics have been regarded as one of promising materials for an antibiotic alternative. In this study, we investigated how the probiotics influences on the performance of broiler chicken via meta-analysis. Eighteen researches from 1997 to 2010 were used for meta-analysis. The standard summary effects were calculated via fixed effect model and random effect model (Borenstein et al., 2009). Heterogeneity was calculated by using the Cochran’s Q statistics (Kook et al., 2009) and publication bias was calculated via Egger’s regression (Lee et al., 2011). In fixed model average daily gain, body weight serum protein content and cecal LAB showed positive effect significantly. Feed intake, feed/gain and serum cholesterol showed significant negative effect. In serum triglyceride, negative effect was found but significance was not shown. In random model, average daily gain body weight and cecal LAB showed positive effects with significance and feed/gain and serum cholesterol represented significant negative effects. Publication bias was found only in feed/gain.
        20.
        2010.11 KCI 등재 서비스 종료(열람 제한)
        Mass mortalities of cultivated organisms have occurred frequently in Korean coastal waters causing enormous losses to cultivating industry. The preventive measures require continuous observation of farm environment and real-time provision of data. However, line hanging aquaculture farm are generally located far from monitoring buoys and has limitations on installation of heavy equipments. Substituting battery pack for solar panels and miniaturizing size of buoy, newly developed system can be attached to long line hanging aquaculture farm. This system could deliver measured data to users in real-time and contribute to damage mitigation and prevention from mass mortalities as well as finding their causes. The system was installed off Gijang and Yeongdeck in Korea, measuring and transmitting seawater temperature at the sea surface every 30 minutes. Short term variation of seawater temperature, less than one day, in Gijang from June to July 2009 corresponded tidal period of about 12 hours and long term variation seemed to be caused by cold water southeast coast of Korea, particularly northeast of Gijang. Seawater temperature differences between Gijang station and the other station that is about 500 m away from Gijang station were 1 ℃ on average. This fact indicates that it is need to be pay attention to use substitute data even if it is close to the station. Daily range of seawater temperature, one of crucial information to aquaculture, can be obtained from this system because temperature were measured every 30 minutes. Averages of daily range of temperature off Gijang and Yeongdeok during each observation periods were about 2.9 ℃ and 4.7 ℃ respectively. Dominant period of seawater temperature variation off Yeongdeok was one day with the lowest peak at 5 a.m. and the highest one at 5 p.m. generally, resulting from solar radiation.