In this study, I would like to inquire about the composition of oegi(外機) on the hip and gable roof. Oegi purlin compose the basic member of framework of a hip and gable roof in both sides roof, supporting the inside end of the side rafter. However, the oegi purlin is not simply used to form hip and gable roof. The effects of using oegi purlin have the advantages of spatial. The spatial advantages are the width of the toekan(退間) increases as the oegi purlin escapes from column row and to increase the ceiling height by becoming a point of staying the ceiling. That reflect the desire to expand indoor space due to changes in worship behavior. Oegi purlin was used not only for structural needs, but also for altering in indoor space due to the changing times.

This study investigates the types and spread of framed structures of gable roofs meeting at right angle showed in old architecture and documentary paintings of houses, which were well liked in the early Joseon Dynasty. The conclusions of this study were as follows. First, the framed structure of gable roof meeting at right angle can be divided or recognized in 4 types according to their structure’s size and purlin’s position. Three of those types were noted to be in Seoul. Second, the framed structure of gable roofs meeting at right angle begun from the awareness of their independence from one another. Each space was divided based on their functions. Therefore, it could be extended in various forms, not only in the square plan physique but also in many different forms. And allowed free plan configuration regardless of column layouts or size of structure. Third, 5 purlins and 3 purlins crossing structure were preferred in Han-yang, the early Joseon Dynasty. It is related to the specific construction conditions of urban houses, such as the slope of land, limited land area, and economic power. Fourth, urban housing techniques were diffused throughout the country by officials who lived in Kae-gyeong and Han-yang at the end of Goryeo and early Joseon Dynasty. In other regions, framed structure of gable roof meeting at right angle households decreased, but in some regions of Gyeongsang-province, framed structure of gable roof meeting at right angle has maintained with Staggered purlin.

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

This study investigates how the spatial recognition structure is emerging through the case of rectangular plan combined with a combination of Dang-Sil(堂室) and Gong(工) shape roof, and identifies a type of architecture in the early Joseon Dynasty that has never been revealed. The conclusion of this study is as follows. First, the Dang and the Sil are connected to each other, but the architectural elements such as pillars, frame, and windows are distinguished and appear as separate buildings. Second, the distinction between Dang and Sil is evident by the difference in the number of ridges and the shape of the roof. In addition, the roof and roof framework of the independent rooms and the rooms were common in the right angled architecture where the direction and the expandability of each structure were maintained. Third, the construction of the Dang-Sil combined structure, in which two or more structure frameworks were combined with the rectangular combined flat roof structure, gradually changed into a single structure with a single ridge. Fourth, this change means that people of the early Joseon Dynasty recognized the Dang and Sil as separate architecture, but the strict sense of spatial separation has disappeared over time.

공업용 건물은 일반적으로 다중 박공지붕의 형태로 많이 건설된다. 본 연구는 독립 및 다중 박공지붕형 저층 건물의 풍하중을 산정하기 위해 풍동실험을 수행하여 비교하였다. 독립 박공형 저층건물은 길이 200m, 스팬방향 폭 32m, 지붕면 평균높이 15.7m로 장스팬 저층건물이며, 다중 박공지붕형 건물은 5개의 지붕이 연결된 대규모 저층건물에 해당한다. 풍동실험을 통해 독립 및 다중 박공지붕형 건물의 최대 가스트 외압계수와 외장재 설계용 풍하중을 산정 하여 비교하였으며, 그 결과 지붕면 모서리와 모퉁이 부분에서 계수 값이 증가하여 나타났다. 또한 실험결과를 KBCS 2005와 비교하였다. 비교 결과를 보면 풍하중 기준보다 풍동실험을 통한 결과가 다소 크게 나타났다.