Background: The circuit exercise program is a continuous method that combines complex training types and is an exercise method that is performed to improve performance by improving basic physical strength such as strength, agility, endurance and muscular endurance. Objectives: To examine the effect of exercise program on pulmonary function of professional volleyball players. Design: Randomized controlled trial. Methods: 22 professional volleyball players were divided into two groups of 11 each. A high intensity interval exercise program and circuit exercise program were performed twice a week for 45 minutes for 4 weeks. Results: The changes in pulmonary function in professional volleyball players were significantly different pre and post the intervention in both groups and the interval exercise program group showed a more significant difference before and after the intervention in Forced Expiratory Volume in 1 Second (FEV1) and Forced Expiratory Volume in 1 Second/Forced Vital Capacity (FEV1/FVC) (P<.05). In addition, there was also a significant difference in FEV1 and FEV1/FVC between two groups (P<.05). Conclusion: The interval exercise program group was effective in improving pulmonary function for professional volleyball players.

PURPOSES : This study aims to deduce the appropriate interval of cross passage for small vehicle exclusive roads within urban underground roads to ensure safety. METHODS : This study evaluated evacuation safety by fire and evacuation simulations. The simulation was applied to a passenger-caronly urban underground road, which was performed in the entry/exit section with a gradient of 6.0% and the mainline on level grade. The values of the variables for the simulations were determined to be close to the actual situation based on of the statistics and the results of previous studies. In the simulation scenario, the cross passage interval was visible. The evacuation safety was evaluated by comparing the “evacuation completion time” and the “smoke diffusion time.” Evacuation safety can be desirable when the evacuation completion time is shorter than the smoke diffusion time. RESULTS : According to the results of the simulation, the desirable cross passage interval is 180 m for the entry/exit sections with a 6% gradient in passenger-car-only tunnels. This criterion may be prolonged to an interval of 210 m and a width of 0.9 m for the construction reduction, based on the results of the statistical analysis. CONCLUSIONS : According to the results of this study, the risk indices of the “Small Vehicles Road Tunnel Fire Safety Facility Installation and Management Guidelines” may be supplemented by the tunnel class and the gradient of the entry/exit section. In addition, the guideline may provide an improved interval of evacuation cross passage and the width of the cross passage door by the safety index.

전기화학적 처리를 통해 합성폐수 내의 질산성 질소, 인을 제거하는 새로운 폐수처리 공정 시스템 개발을 위한 연구를 수행하였다. 전류밀도에 따른 제거율은 전류밀도가 높아질수록 질산성 질소의 높은 제거효율을 얻었고, 전극 스위칭시간에 따른 N03-제거율은 스위칭 간격이 1 min일 때 높은 질산성 질소 제거효율을 얻었다. 전류밀도에 따른 총인 제거율은 전류밀도와 간격의 변화에 크게 영향을 받지 않으면서 90%이상 처리되는 것으로 나타났고, 스위칭시간(1 min간격)의 증가에 따른 총인 제거율은 증가 한 것으로 나타났다. 반면 COD의 경우는 전기화학적 처리를 통해서는 처리되지 않는 것으로 나타났으며 오히려 전극이 용출되면서 증가하는 결과를 얻었다. 또한, 전극의 소모율은 스위칭 간격이 짧을수록 적은 것으로 나타났다. 최종적으로 전기화학적 처리(전류밀도 50 mA/cm2, 스위칭 간격 1 min, 유량 540 mL/min)를 통해 질소 98.1%, 인 90% 이상의 제거 효율을 얻을 수 있었다.

본 연구는 우량묘 생산을 위해 신개발된 인공배지와 육묘용 배지의 이화학적 특성을 비교하고 적정 관수 간격을 구명하기 위해 수행되었다. 5종의 기존 인공배지 (유기배지인 coir, 혼합배지인 Tosilee와 Q plug, 그리고 무기배지인 LC와 rockwool)와 4종의 신개발 배지(혼합 배지인 TP-S1, 그리고 무기배지인 PU 14-S1, PU-7B, PU 15-S1)를 이용하여 토마토(Solanum lycopersicum L.) ‘예광’을 육묘하였으며, 14일간 1일(14회), 2일(7회) 그리고 3일(5회) 간격으로 관수 처리하였다. pH는 PU 15-S1 배지에서 유의성 있게 가장 높았으며, 모든 배지 에서 pH 5.17-6.90의 범위였다. EC는 Q plug 배지에서 가장 높게 나타났다. 초기발아율은 PU 15-S1 배지에서 가장 우수하였다. 최종발아율과 평균발아수는 PU 14-S1 배지를 제외하고는 모든 배지에서 유의적인 차이가 없었다. 파종 후 15일째 토마토 묘의 생육은 Q plug 배지에 서 우수하였다. 파종 후 29일 째 묘의 생육 또한 Q plug 배지에서 유의적으로 우수하게 나타났고, 다음으로 rockwool과 PU-7B 배지에서 우수하였다. 또한 생육은 1일 간격 처리에서 가장 우수한 경향을 보였다. 결과적으로 본 실험에서 토마토 육묘 시 인공배지의 적용가능성을 확인하였으며, 묘의 생육은 Q plug 배지에서 가장 우수하였다. 신개발된 PU-7B 인공배지에 양분을 첨가하고 1일 간격으로 관수한다면 Q plug 배지의 결과와 같이 우수한 토마토 묘를 생산할 수 있을 것으로 판단된다.

A diverse of recommendation has been made for the structure and management of dairy cows, despite demanding research, the relationship between lactation number and various factors is yet to be established. The present study was aimed to investigate the covariance among lactation number, growth performance, calving interval, and milk production was considered to increase an efficiency of selection schemes and to manage more efficiently Holstein dairy cows that have been raised on small-scale family farms in Republic of Korea. For that purpose, the data were observed from 850 Holstein dairy cows, which a total of 3929 milking, since April 2016 - January 2017. We measured the body weight, height, age, calving interval, and milk production of the each dairy cow. Also, information about the date of lactation, calving interval, and milk production was recorded using an automatic milking system(AMS) with identification numbers. Milk production was calculated per udder quarter in the AMS. Our study results showed the increased average body weight(p>0.05) in 1, 2, 3, and 4th lactating dairy cows and afterwards, we noticed the tendency on the average body weight(p<0.05) per lactation progressed. There was no significant difference noticed on height measurement of dairy cows. From the processing data of 850 Holstein dairy cows, the lactation number 1 and 7 had a greater calving interval with significantly lowered milk production, and the lactation number 2, 3, 4, 5, and 6 had significantly lowered the calving interval(p<0.05) with a greater milk production. From our study results, we evidenced that there is a significant relationship between the lactation number, growth performance, calving interval, and milk yield, and the maximum production of milk occurring in the 3rd and 4th lactation dairy cows. The achieved results from this study can be used by the small-scale farmers to encourage the structure and management of growth performance, calving interval, and milk yield in Holstein dairy cows in Korea.

In previous experiment, drying efficiency of infrared and hot air dryers was investigated. On this study, drying rate of sweet potato according to different infrared interval was performed to find the optimal interval range. Steamed sweet potato was cut to a thickness of 0.5cm, the width and length were 1.5*3cm. The condition of infrared drying was 60 to 40°C, which range of interval was adjusted 5 to 20°C. Moisture content, brix, color, and texture were estimated as quality parameters. Drying rate was increased with decreasing temperature range and soluble solid contents were increased as drying time was increased, but there was no difference after 4 hours. Hardness was resulted in highest value at small temperature range and hard texture was affected by drying time. However, there were no significant differences in L, a, b value. In conclusion, small interval range of infrared was indicated highest drying efficiency and the optimal condition of drying time was 4 to 6.

This study aimed to investigate growth rate and nutrient consumption of Chlorella vulgaris according to different light irradiation interval. Applied light irradiation intervals were 12 hr, 4 hr, 1 hr, and 1 min. The light source was flexible LED(Blue:Red=1:1), light intensity was 200 PPFD and Light/Dark cycle was 1:1. As a result, growth rate and nutrient removal efficiencies showed no significant differences depending on the light irradiation interval. Considering the reproduction characteristics of applied microalgae cultures of this study, this is thought to be one of the possible reasons of above results. Because Chlorella vulgaris performs an asexual reproduction and it is known that there is no significant relationship between light irradiation interval and growth rate, including nutrient consumption in case of asexual reproduction.

본 연구의 목적은 분만간격에 따른 추가 착유일수를 계산하여 불완전 Gamma모형으로 추정된 비유곡 선모수값을 통하여 추가 착유일 만큼의 산유량을 계산하고, 추가 착유에 따른 경제성을 분석하기 위함 이다. 경제성 분석을 위하여 농협중앙회 젖소개량사업소에서 진행하고 있는 유우군 능력검정사업에 참 여하고 있는 홀스타인 젖소로부터 조사한 착유기록 2,072개를 분석하였는데, 분석에 이용된 착유기록은 2010년 1월부터 2012년 12월 사이에 분만한 초산우 및 경산우로부터 자료이다. 비유곡선 모수는 Wood 모형을 적용하여, SAS 9.2 NLIN Procedure를 이용해 추정하였다. Wood 모형으로 추정한 비유곡선 함수는 초산우 및 경산우에 대해 각각 yt = 18.00t0.189e-0.00231t 및 yt = 24.73t0.181e-0.00315t로 추정되었다. 초산 우의 경우 산유량이 8,000kg 이하인 우군의 적정 분만간격은 400일 이하로 유지하는 것이 바람직하며, 8,000kg 이상인 우군은 분만간격을 400일에서 500일 사이로 유지하는 것이 바람직하다. 경산우의 경 우 산유량이 9,000kg 우군은 적정 분만간격을 400일 이하로 유지하고, 9,000kg 이상인 우군의 분만간 격은 400일에서 500일 사이로 유지하는 것이 바람직하겠으며, 11,000kg 이상의 고능력 경산우 우군의 경우 분만간격이 길어질수록 순수이익은 증가하나, 차기 임신 및 분만을 위해서는 분만간격을 450일에 서 500일 사이로 유지하는 것이 바람직하다고 할 수 있겠다.

Supply chain is usually represented by a network (which is called supply chain network) that contains some nodes. In a supply chain network these nodes are suppliers, plants, distribution centers and customers which are some facilities connected by some arcs to each other. The arcs connect the nodes in the direction of their production flow, meaning that each arc shows a route between the facilities for transporting the products. A multi-stage supply chain network (MSCN) is defined as a sequence of multiple supply chain network stages. This paper addresses a typical supply chain network problem which is based on a two-stage single-product system under uncertain conditions such that both cost and constraint parameters are interval numbers. The combination of these uncertain parameters are considered in this typical problem for the first time. In this case, two different order relations (the order relations UC ≤ and HW ≤ ) for interval numbers are considered. Then, two solution procedures are developed in order relations for the interval two-stage supply chain network design problem. The efficiency of the proposed method is illustrated by a numerical example where it is proved that the relation HW ≤ shows better performance than the relation UC ≤ .

본 연구는 분만간격과 비유곡선 모수들 간의 상관관계를 규명하기 위하여 농협중앙회 젖소개량사업 소에서 진행하고 있는 유우군 능력검정사업에 참여하고 있는 홀스타인 젖소로부터 조사한 착유기록 36,505개를 분석하였는데, 분석에 이용된 착유기록은 모두 2011년부터 2013년 사이에 분만한 경산우 로부터 조사하였다. 비유곡선 모수는 Wood 모형을 적용하여, SAS 9.2 NLIN Procedure를 이용해 추 정하였다. 분만년도-계절(봄, 여름, 가을, 겨울)효과와 산차(2, 3, 4산차)의 효과를 고정효과로 한 다 형질 일반선형모형으로 SAS(GLM procedure)를 이용하였다. 분만간격, 305일 유량, 비유곡선모수(A, b, c), 비유지속성, Peak 일시 및 Peak기 유량에 대해 분만년도-계절과 산차의 효과는 모두 유의적 으로 나타났다(p<0.05). Wood 모형으로 추정한 비유곡선 함수는 2, 3 및 4산차에 대해 각각 yt = 24.66t0-175e-0.00302t, yt = 24.69t0-192e-0.00334t 및 yt = 24.22t0.200e-0.00341t으로 추정되었다. 분만간격과 305일 유량, 모수값 A, b, c, 비유지속성, Peak 일시 및 Peak기 유량과의 표현형상관(잔차상관)은 각 각 0.093, -0.014, 0.028, -0.046, 0.099, 0.085 및 0.052으로 나타났다. 분만간격이 길어지면 비유 곡선의 상향경사도, 비유지속성, Peak 일시, Peak기 유량은 증가하고, 비유곡선의 하향경사도는 감소 하여, 305일 유량은 증가할 것으로 판단된다.

The Korean native cattle, Hanwoo, is the most popular breed of beef cattle in Korea. However, the reproductive performance data are limited although reproduction is one of the most economically and biologically important in beef production. Therefore, this study was undertaken to investigate reproductive performance parameters including calving interval, parity for life time production. Data collected from 206,827 calvings were analyzed. There were no significant differences in calving interval and gestation days as parity increased from 2nd and 13rd parity cow, from spring to winter. However, we found a dramatic increase in calving interval after year 2000. About 1 month were increased per year ( y = 30.578x + 344.45 R² = 0.9157). Interestingly, we observed that parities for life time can be affected by birth weight. Calves with 23 kg at birth showed highest parities, 3.4±2.0 times. In summary, this study provides valuable data on reproductive performance of Hanwoo and the data presented here can be used as a standard target for optimising and enhancing reproductive performance.