In this study, proposed how to design an airport concrete pavement expansion joint considering the weather conditions and material properties. Currently, expansion joint spacing of airport concrete pavement in korea is not designed according to a clear standard, but it is designed to an empirical level. Various types of Admixture are used in concrete pavement and depending on the material characteristics or local environmental factors, there is a substantial difference in the extent and shrinkage to which the package is inflated. Significant differences are made in the extent to which the pavement expands or shrinkage depending on the material characteristics used or the local environmental factors. But, expansion joint design performed on empirical criteria cannot reflect these materials and environmental characteristics, resulting in unpredictable damage such as blow-up. To analyzing behavior of airport concrete pavement, horizontal displacement gauges, static strain gauges and thermometers are installed in the 3rd phase construction sites at Incheon International Airport. In this study, the relationship between the temperature and horizontal displacement of the concrete pavement was analyzed using the measured depth temperatures and the horizontal displacement data at the expansion joints at the Incheon airport site. The Finite Element Analysis Model of Incheon International Airport pavement was used to compare the difference between actual behavior and analytical behavior. In addition, it is proposed to design a suitable expansion joint spacing by considering the maximum expansion of concrete pavement and shrinkage caused by material expansion (e.g., ASR) and shrinkage due to water loss. This study was supported by Incheon International Airport Corporation (BEX00625).

본 연구는 반복 횡하중 하에서의 기둥부재와 보-기둥 연결부에 대한 구조 성능 확인을 위하여 기 수행된 실험을 토대로 해석모델을 수립하고 사용 프로그램의 유용성과 실용성을 평가하는 것을 목적으로 하였다. 기존 연구자들에 의해 제안된 콘크리트와 철근의 이력 모델을 비선형 해석 프로그램인 PERFORM3D에 적용하여 수행되었다. 결과로서, 반복 횡하중 하의 비보강 보-기둥 연결부재의 해석과 실험결과가 비교적 일치함을 확인하였다. 이로써 입증된 비보강 시험체의 해석 모델에 탄소와 아라미드 섬유시트 그리고 비좌굴 가새를 추가 적용하여 실험결과와 비교.검증하여 내진 성능 보강의 해석모델을 수립하였다. 이는 기존 구조물에 대한 보강에 있어서, 해석을 통한 사전 성능 검토에 활용함으로써 시간과 물질적 측면에서의 경제성 도모에 기여할 것으로 예상된다.

볼트 접합부의 정확한 해석을 위하여 접합 요소와 볼트 요소 및 쉘 요소를 사용한 방법을 개발하였다. 접합면을 단순하게 이상화시키는 접합 요소와 장력을 갖는 볼트 요소를 도입하였고, 전체적인 계산과정은 2단계, 즉 제안된 방법에 의한 초기 강성의 결정과 뉴턴-랩슨법에 근거하는 호장법을 이용한 비선형 거동의 추적으로 구분하여 행함으로써 계산의 효율성을 증대시켰다. 앵글을 사용한 반강접 접합부와 모멘트 판을 사용한 접합부를 해석하여 기존 실험 및 해석과 비교함으로써 제안한 방법의 정확성과 적용성을 입증하였다. 또한 볼트 접합부의 정확한 해석을 위해서는 접합면에서 발생하는 미끄럼짐의 고려가 반드시 필요하며 접합부를 구성하는 판재의 3차원적인 변형의 해석도 무시할 수 없는 역할을 하는 사실을 보여주었다.

In this research, we used half model instead of full model in order to consider convergence and analysis running time. We carried out nonlinear analysis on the joints between steel tower to concrete supporting structure of the 5MW offshore wind turbine applying only half of the load on the joint.

This paper presented to study used Abaqus on steel plate bonded reinforcement technology for column to beam connections, and then the result showed that steel plate bonded reinforcement technology has great reinforcement effect for RC column to beam joint. Also the steel plate bonded reinforcement technology was safety and convenient operation.

In recent year, a reduction of the damage to nonstructural components such as piping, ceiling, mechanical and electrical equipments or an improvement on the performance of nonstructural components has emerged as a key area of research. Therefore, the primary objective of this study was to evaluate and understand the seismic performance of the complex piping system such as a T-joint connection. Furthermore, it was targeted on evaluating the Finite Element (FE) Model of the T-joint connection based on moment-rotation relationship of the experimental tests. The results of FE analysis by OpenSees were in a good agreement with the experimental test result till the failure point in both models.