The nanostructured dysprosium oxide ( Dy2O3) was synthesized by the co-precipitation method and incorporated with graphitic carbon nitride (g-C3N4) using the ultrasonication method. The resultant product is denoted as Dy2O3/ g-C3N4 nanocomposite which was further used for electrochemical sensing of riboflavin (RF). The physicochemical properties of Dy2O3/ g-C3N4 nanocomposite were examined using several characterization techniques. The obtained results exhibit the nanocomposite formation with the preferred elemental compositions, functional groups, crystalline phase and desired surface morphology. The electrocatalytic performance of Dy2O3/ g-C3N4 nanocomposite was scrutinized with a glassy carbon electrode (GCE) via differential pulse voltammetry (DPV) and cyclic voltammetry (CV) techniques with the conventional three-electrode system. The modified electrode distributes more active surface area suggesting high electrocatalytic activity for the RF detection with two linear ranges (0.001–40 μM and 40–150 μM), a low detection limit of 48 nM and sound sensitivity (2.5261 μA μM−1 cm− 2). Further, the designed sensor possesses high selectivity, excellent stability, repeatability and reproducibility. Finally, the fabricated sensor was successfully estimated for the detection of RF in actual food sample analysis using honey and milk with better recovery.

그래핀, 제올라이트, metal-organic frameworks (MOF)s 등 다양한 나노 소재를 이차원 나노쉬트 형태로 제조하고, 이를 이용한 초박막 고성능 분리막을 개발하고자 하는 연구가 활발히 진행되고 있다. 특히, 산화그래핀의 경우, 2000년대 초반에 관련 연구가 시작된 이후, 다양한 합성 및 박막 코팅 기술이 축적되어 있어 빠른 속도로 분리막 분야에 응용되고 있다. 다층으로 적층된 산화그래핀 박막은 층간 거리를 조절함에 따라 물리적 거름막으로 작용할 수 있으며, 또한 표면의 기능기 및 삽입된 물질과 거르는 물질 간의 상호작용을 제어함에 따라 다양한 물질의 선택적 분리가 가능하다. 본 총설에서는 산화그래핀의 나노여과막 응용분야에 관하여 중점적으로 다루고자 한다. 본고에서는, 다양한 용매 내에서 산화그래핀 박막의 분리 기작 및 성능에 영향을 미치는 핵심 요소들에 대해 요약하였으며, 그 외 산화그래핀 기반 분리막의 실질적인 상용화에 필요한 핵심 기술요소 및 개발 동향에 대하여 논하고자 한다.

In this work, economical, facile and eco-friendly technology for gas separation was utilized, especially for propane and propylene. This materials are commonly used in petrochemical process as principle and base sources. In present state, adsorption or cryogenic distillation method are used for their separation, however, intensive energy cost and complex process are needed. In particular, we fabricated polymeric composite membrane with high scalability, propylene and propane gases are effectively separated. Whats more, Ag ion is pivotal materials with pi complexation effect. MgO nanosheet was incorporated for enhancing and activating Ag ion in polymer composite membrane. Lastly, Ag-friend polymer matrix was used for getting higher perm-selecetivity.

RuO2 is a common active component of Dimensionally Stable Anodes (DSAs) for chlorine evolution that can be used in wastewater treatment systems. The recent improvement of chlorine evolution using nanostructures of RuO2 electrodes to increase the treatment efficiency and reduce the energy consumption of this process has received much attention. In this study, RuO2 nanorod and nanosheet electrodes were simply fabricated using the sol-gel method with organic surfactants as the templates. The obtained RuO2 nanorod and nanosheet electrodes exhibit enhanced electrocatalytic activities for chlorine evolution possibly due to the active surface areas, especially the outer active surface areas, which are attributed to the increase in mass transfers compared with a conventional nanograin electrode. The electrocatalytic activities for chlorine evolution were increased up to 20 % in the case of the nanorod electrode and 35% in the case of the nanosheet electrode compared with the nanograin electrode. The RuO2 nanorod 80 nm in length and 20-30 nm in width and the RuO2 nanosheet 40-60 nm in length and 40 nm in width are formed on the surface of Ti substrates. These results support that the templated RuO2 nanorod and nanosheet electrodes are promising anode materials for chlorine evolution in future applications.

In this study, polyaniline (PANI)/graphene nanosheet (GNS) composites were synthesized through chemical oxidation polymerization by changing the weight ratio of aniline mono-mers. To examine the morphological structure of the composites, scanning electron micros-copy and transmission electron microscopy (TEM) were conducted. TEM results revealed that fibril-likePANI with a diameter of 50 nm was homogeneously coated on the surface of the GNS. The electrochemical properties of the composites were studied by cyclic voltam-metry in 1 M H2SO4 electrolyte. Among the prepared samples, the PANI/GNS (having 40 wt% aniline content) showed the highest specificcapacitance, 528 Fg-1, at 10 mVs-1. The im-proved performance was attributed to the GNS, which provides a large number of active sites and good electrical conductivity. The resulting composites are promising electrode materials for high capacitative supercapacitors.

As a growth-template of ZnO nanorods (NR), a hexagonal β-Ni(OH)2 nanosheet (NS) was synthesized with the low temperature hydrothermal process and its microstructure was investigated using a high resolution scanning electron microscope and transmission electron microscope. Zinc nitrate hexahydrate was hydrolyzed by hexamethylenetetramine with the same mole ratio and various temperatures, growth times and total concentrations. The optimum hydrothermal processing condition for the best crystallinity of hexagonal β-Ni(OH)2 NS was determined to be with 3.5 mM at 95˚C for 2 h. The prepared Ni(OH)2 NSs were two dimensionally arrayed on a substrate using an air-water interface tapping method, and the quality of the array was evaluated using an X-ray diffractometer. Because of the similarity of the lattice parameter of the (0001) plane between ZnO (wurzite a = 0.325 nm, c = 0.521 nm) and hexagonal β-Ni(OH)2 (brucite a = 0.313 nm, c = 0.461 nm) on the synthesized hexagonal β-Ni(OH)2 NS, ZnO NRs were successfully grown without seeds. At 35 mM of divalent Zn ion, the entire hexagonal β-Ni(OH)2 NSs were covered with ZnO NRs, and this result implies the possibility that ZnO NR can be grown epitaxially on hexagonal β-Ni(OH)2 NS by a soluble process. After the thermal annealing process, β-Ni(OH)2 changed into NiO, which has the property of a p-type semiconductor, and then ZnO and NiO formed a p-n junction for a large area light emitting diode.

In this work, the effect of co-carbon fillers on the electrical and mechanical properties of epoxy nanocomposites was investigated. The graphite nanosheets (GNs) and multi-walled carbon nanotubes (MWNTs) were used as co-carbon fillers. The results showed that the electrical conductivity of the epoxy nanocomposites showed a considerable increase upon an addition of MWNTs when GNs were fixed at 2 wt.%. This indicated that low content GNs formed the bulk conductive network and then MWNTs added were intercalated between the GN layers, resulted in the formation of additional conductive pathway. Furthermore, the flexural strength of the epoxy nanocomposites was enhanced with increasing the MWNT content. It was probably attributed to the flexible MWNTs compared with rigid GNs, resulted in the enhancement of the mechanical properties.