In this study, a high-resolution integrated real-time visualization device using surface plasmon resonance was designed and considered to overcome the measurement limitations of existing optical systems. For precise measurements, resonance angle and reflectivity were calculated using theoretical equations, and the designed surface plasmon resonance visualization system was verified by comparison with experimental values using a He-Ne laser. Surface information of the droplet was acquired using polarized, single-wavelength converted white light, and quantified through image processing. As a result of the experiment, it was confirmed that when light with a wavelength of 632.8 nm is incident on the Kretchmann structure prism-metal thin film-dielectric (air/water), it is not totally reflected at an angle above the critical angle and the reflectivity is rapidly reduced due to the surface plasmon resonance phenomenon. As a result of quantifying the image, it was confirmed that the droplet reflectivity was similar to the theoretical reflectivity at each resonance angle.

At present, an important research area is the search for materials that are compatible with CMOS technology and achieve a satisfactory response rate and modulation efficiency. A strong local field of graphene surface plasmon polariton (SPP) can increase the interaction between light and graphene, reduce device size, and facilitate the integration of materials with CMOS. In this study, we design a new modulator of SPP-based cycle branch graphene waveguide. The structure comprises a primary waveguide of graphene–LiNbO3–graphene, and a secondary cycle branch waveguide is etched on the surface of LiNbO3. Part of the incident light in the primary waveguide enters the secondary waveguide, thus leading to a phase difference with the primary waveguide as reflected at the end of the branch and interaction coupling to enhance output light intensity. Through feature analysis, we discover that the area of the secondary waveguide shows significant localized fields and SPPs. Moreover, the cycle branch graphene waveguide can realize gain compensation, reduce transmission loss, and increase transmission distance. Numerical simulations show that the minimum effective mode field area is about 0.0130l2, the gain coefficient is about 700 cm–1, and the quality factor can reach 150. The structure can realize the mode field limits of deep subwavelength and achieve a good comprehensive performance.

We improve the energy conversion efficiency (ECE) of a dye sensitized solar cell (DSSC) by preparing a working electrode (WE) with localized surface plasmon resonance (LSPR) by inducing Au thin films with thickness of 0.0 to 5.0 nm, deposited via sputtering. Field emission scanning electron microscopy and atomic force microscopy were used to characterize the microstructure of the blocking layer (BL) of the Au thin films. Micro-Raman measurement was employed to confirm the LSPR effect, and a solar simulator and potentiostat were used to evaluate the photovoltaic properties, including the impedance and the I-V of the DSSC of the Au thin films. The results of the microstructural analysis confirmed that nano-sized Au agglomerates were present at certain thicknesses. The photovoltaic results show that the ECE reached a value of 5.34% with a 1-nm thick-Au thin film compared to the value of 5.15 % without the Au thin film. This improvement was a result of the increase in the LSPR of the TiO2 layer that resulted from the Au thin film coating. Our results imply that the ECE of a DSSC may be improved by coating with a proper thickness of Au thin film on the BL.

In this study, we investigated localized surface plasmon resonance and the related coupling phenomena with respect to various geometric parameters of Ag nanoparticles, including the size and inter-particle distance. The plasmon resonances of Ag nanoparticles were studied using three-dimensional finite difference time domain(FDTD) calculations. From the FDTD calculations, we discovered the existence of a symmetric and an anti-symmetric plasmon coupling modes in the coupled Ag nanoparticles. The dependence of the resonance wavelength with respect to the inter-particle distance was also investigated, revealing that the anti-symmetric mode is more closely correlated with the inter-particle distance of the Ag nanoparticles than the symmetric mode. We also found that higher order resonance modes are appeared in the extinction spectrum for closely spaced Ag nanoparticles. Plasmon resonance calculations for the Ag particles coated with a SiO2 layer showed enhanced plasmon coupling due to the strengthened plasmon resonance, suggesting that the inter-particle distance of the Ag nanoparticles can be estimated by measuring the transmission and absorption spectra with the plasmon resonance of symmetric and anti-symmetric localized surface plasmons.

SPR biosensors which belong to a family of thin film refractometry-based sensors measure refractive index changes produced by biomolecular interactions occurring at the surface of the sensors. The main advantage of SPR biosensors is to detect molecular interactions directly without the use of labels. This feature makes them possible to observe biomolecular interactions in real-time or near real-time. The non-specific binding between ligand and target analyte may, however, produce a false refractive index change resulting in false sensor response. The applications of SPR biosensors have involved biomolecular interaction kinetics analysis, affinity measurement, screening and concentration assay, and so on.