If a system such a port and regional economy has a large boundary and complexity, the system's substance is considered as a black box, forecast accuracy will be very low. Futhermore various components in a port and regional economy exert significant influence on each other. To copy with these problem the from of structure models were introduced by using SD model. This study has the issue of simplifying the regional economic effects of the port as contributing to raising the regional income. The regional economic effects of port have various indirect ones except for this. So, SD(System Dynamics) was presented, and applied to simulate port and regional economy.

In this paper, an improved high efficiency gantry crane for container transportation is designed. The basic concept of the designed crane can be used with modification of the classical gantry crane instead of changing lots of them. This crane can reduce the cycle time more than the classical gantry carne. The high efficiency gantry crane can improve the productivity of the container transportation job because of reducing cycle time. The loading and unloading capability are compared with classical crane. The result show that show that the proposed crane has better performances than classical type.

Although there are a lot of primary factors to be able to make characters and identities in Pusan South Harbor, Badly Planned development prevented enhancing the sense of place in urban waterfront. The point in the waterfront development is how to secure amenities based on indentity and orientation; node, landmark, edge, path, district. This study aims at developing waterfront area of Pusan South Harbor and attempting to establish an identity through studying characteristics of ‘places’ in Pusan South Harbor. The place consists of two elements; orientation and identity, which can be explained the environmental totality, ‘character’ and ‘space’ respectively. The urban waterfront has strong characteristics which consists of land area, water area, and transit zone combining two areas. The place of Pusan South Harbor is analysed those four elements. We proposed objectives and criteria which can be used in enhancing the sense of this place.

Today travel demand continues to increase with spread of economic zones. Also, urban freeway plays an important role in intra-zone transportations as a major corridor in a big city. However, most of urban freeways experience a severe congestion with the excess of inflowing or outflowing traffic through freeway ramps. The purpose of this study is to identify the traffic characteristics, analyze the relationships between the traffic characteristics and finally construct the speed predictive models on the ramp junctions of urban freeway under the intelligent transportation system(ITS) settings. From the analyses of traffic characteristics following results were obtained: ⅰ) 24 hours average traffic characteristics flow, occupancy, speed under the ITS settings showed about 40%, 38%, 8.8% increase each on urban freeway junctions period when compared with that under the non-ITS settings each other. Free flow speed and traffic flow on the mainline sections of urban freeway under the ITS settings also showed about 20% and 17% increase when compared with that under the non-ITS, respectively. ⅱ) The upstream when compared speed( Su)and downstream occupancy( Od) were especially shown to have higher explanatory powers on the stable flow ramp junctions, but the upstream speed( Su) and downstream flow( Vd) were especially shown on the unstable flow ramp junctions of urban freeway under the ITS settings.ngs.ngs.

The primary purpose of dredging work is to maintain navigational readiness and to increase environmental amenity. Therefore the dredging project, which is composed of excavating, removing, transporting and storing or dumping dredged material, must be carefully managed to insure that dredging works are completed in a cost-effective and environmentally safe method. The most important point in dumping operations is evaluating and decreasing the impacts of dumping works at the dumping area. One of the most effective method for this purpose is using the schematic process composed of the sophisticate plan, precise work and predicting/reducing the impacts based on an numerical model being closely linked with field observation. In this study, a numerical model is used to predict the spatial transport and fate of the effluent discharged from the confined dumping facility(CDF) located at a coastal area. To achive this purpose, numerical models were used for reappearing the tidal current of concerned area. These models were then applied to Mokpo harbpr where capital dredging and maintenance dredging are being conducted simultaneously and the CDF is under construction. In series of model case study, we found that the effluent discharged from CDF was governed by the receiving water condition and outfall geometry, so that limit of near-field was 14∼500 meter down stream and 4∼150 meter in transverse direction. dilution ranged from 1.1 to 8.2 on the cases. Long-term diffusion characteristics was governed by the dilution rate during near-field behavior, ambient conditions and CDF operation modes.

The design and maintenance of navigation channel and water facilities of an harbor which is located at the mouth of river or at the estuary area are difficult due to the complexity of estuarial water and sediment circulation. Effects of deepening navigable waterways, of changing coastline configurations, or of discharging dredged material to the open sea are necessary to be investigated and predicted in terms of water quality and possible physical changes to the coastal environment. A borad analysis of the transport mechanism in the estuary area was made in terms of sediment property, falling velocity, concentration and flow characteristics. In order to simulate the transport processes, a two-dimensional finite element model is developed, which includes erosion, transport and deposition mechanism of suspended sediments. Galerkin’s weighted residual method is used to solve the transient convection-diffusion equation. The fluid domain is subdivided into a series of triangular elements in which a quadratic approximation is made for suspended sediment concentration. Model could deal with a continuous aggregation by stipulating the settling velocity of the flocs in each element. The model provides suspended sediment concentration, bed shear stress, erosion versus deposition rate and bed profile at the given time step.

A possibility of the implementation of a quartz crystal sensor to the determination of chemical oxygen demand is examined by checking the electrochemical behavior of the sensor in a glucose solution. Since the surface of a quartz crystal has to be oxidized, a relatively active metal is coated on the surface of a usual 9 MHz AT-cut crystal. The electrochemical behavior is investigated by measuring the changes of current, resonant frequency and resonant resistance while a constant potential is applied. The crystal is installed in a specially designed container, and a quartz crystal analyzer is utilized to measure the frequency and resistance simultaneously. The variations of the measurements are examined at different concentrations of glucose solution, and a proper relation between the concentrations of glucose solution, and a proper relation between the concentration and the measurements is analyzed. As a result, it is found that a linear relation between the concentration of less than 900 ppm and the peak current when a constant potential of -180 mV (SSCE) is applied. The relation can be utilized for the determination of glucose concentration in sea water, and considering a direct relation between gluose concentration and chemical oxygen demand tells a possibility of the measurement of chemical oxygen demand using quartz crystal oscillators.